SEAJIC Oth-AB503 Pocket Light User Manual
- June 10, 2024
- SEAJIC
Table of Contents
Oth-AB503 Pocket Light
RGB
Oth-AB503
Pocket Light User Manual
Oth-AB503
Webwww.osmdigi.com StandardQ/OSL 001-2019 Made in China
Z2020G50145W0 AB503 150X100mm :750X100mm 80g
CCT MODE 98%
6000K
/RGB
¼
Type-C
33
CCT MODEHSI MODE
CCT MODE CCT MODE
98% 6000K
CCT MODE 98%
6000K
:1%-100%,” ” ” “” “” “” ” ,,
:2500K-9900K,” ” ” “” “” “” ” ,
HSI MODE HSI MODE
98% H 77° S 100%
HSI MODE 98%
H 77° S 100%
HSI MODE 98%
H 77° S 100%
:1%-100%” ” ” “” “” “” ” ,,
H :0-360″ “” ”
” “,” “” ”
S :0-100%” ”
” “” “,” “” “,
“SCENE MODE”,10
RGB RGB RGB
30
360 2500K-9900K 10 10
33 3
1/4″,1/4″
1
2
3
4
30mm
72mm
30mm 44mm
50mm
18mm 26mm
Oth-AB503 25+16RGB 10 2-3100% 90g(±10) 2000mAh ABS() PC()
APP
.
. 1. APP”SEARCH DEVICE”
2. ” “”EDIT” “DELETE”
Home IFEELINGU
SEARCH DEVICE
. / /
Home iLightU Bright
. 1. ” “”Group” ” CREATE GROUP ” (
2.
IFEELINGU SEARCH DEVICE
Create Group iLightU iLightU iLightU iLightU iLightU CANCEL CONFIRM
Set Group Name CANCEL CONFIRM
. ” ”
White Bright “CCT MODE”
CCT Bright:
Color Panel
White Bright Color Bright
CCT65 K
Bright 100%
HSI RGB CMYK LAB
H:26°
S:88%
Color Bright “HSI MODE”
Color Panel
I100%
HSI RGB CMYK LAB
I100% HSI
ColorPanel Effect10 (
Product Introduction
Property switching key
Cold shoe clamp
Amount up key
Amount down key
CCT MODE 98%
6000K
Magnet
Lampshade
Switch key Mode switching key (cold/warm light/RGB) Light effect key
Display screen
Remote controller
Cold shoe joint
Adjusting knob Adjusting knob
Remote controller key operating function is the same with that of mainframe
1/4screw-socket
When battery is low, charge mainframe remote controller with Type-C interface.
Instructions of Part of Functional Keys
ON/OFF Key Long press for 3 s to start it up and long press for 3 s again to
shut it down.
Mode switching key Press this key to switch”CCT MODE”or”HSI MODE”.
CCT MODE CCT MODE
98% 6000K
CCT MODE 98%
6000K
Luminance adjustment: 1% – 100% luminance adjustable. Press” ” When” “points
to” ” press” “or ” ” to adjust luminance. The bigger the number is, the higher
the luminance will be.
Color temperature adjustment: 2500 9900K adjustable by,pressing” “,When”
“points to ” “press” ” or” “to adjust color temperature. The smaller the
number is, the more warm-white the light will be. The bigger the number is,
the more cold-white the light will be.
HSI MODE HSI MODE
98% H 77° S 100%
HSI MODE 98%
H 77° S 100%
HSI MODE 98%
H 77° S 100%
Luminance adjustment: 1% – 100% luminance adjustable. Press” ” When” “points
to” ” press” “or ” ” to adjust luminance. The bigger the number is, the higher
the luminance will be.
H Color wheel: 0-360 colors optional by pressing ” ” ,When” “points to” “,
press” “or ” “to adjust color.
S Saturation: 0-100% saturationoptional by pressing ” “,When” “points to” ” ,
press” “or” “to adjust saturation. The bigger the number is, the higher the
saturation will be.
Light effect key
Press this key to enter “SCENE Mode”. 10 light effects optional (see figure
below). Press this key in turn, to choose light effect you need.
Beauty Dish Use
Police car Fire engine Ambulance Flash
Ambient light
Romance
RGB quick flash
RGB slow RGB strobe Candlelight flash
Note: It will enter dormant state when display screen is not operated for 30 s. Press any key to wake up screen.
Product Features
360 colors optional 2500K 9900K cold-warm light adjustable 10 light effects
optional With 4 cold shoe joints, the Product can be spliced freely. Wireless
transmission within 10 m scope of Bluetooth
Bluetooth Connection
Long press mainframe ON/OFF key for 3 s to start up and then long press remote
controller ON/OFF key for 3 s, and blue lamp will be on and Bluetooth can be
connected automatically. Long press remote controller ON/OFF key for 3 s, and
blue lamp will flicker and Bluetooth will be disconnected.
Use beauty dish to fill lightto soften light. Light will get softer and more
uniform.
Use Instructions of Cold Shoe Interface
With 4 cold shoe interfaces, the Product can be sliced freely; The built-in
1/4 screw-sockets at the bottom of cold shoe interface helps the Product
connect other products with 1/4 interface.
Cold Shoe Connector Installation
1
2
Specifications/ Parameters
30mm
72mm
1. Turn the adjustment knob clockwise to loosen the connector
3
2. Snap the connector into the cold shoe slot
4
3. Rotate the adjustment knob counter clockwise to secure the connection
4. Adjust the light to face up or down
Magnet
Designed with magnet function on the back, the Product can be absorbed onto
any metal plane.
30mm 44mm
50mm
18mm 26mm
Product Model Number of Light Beads Bluetooth Distance
Oth-AB503 25 cold/warm light beads + 16 RGB light beads 10m
Endurance
2-3h (luminance100%)
Product Weight
90g(±10)
Battery Capacity Product Material
2000mAh ABS (fireproof grade) PC (fireproof grade) Aluminum
Install APP
I . Scan QR code to download
Android system supported only at present
II.Searchdelete available device
Home
1. Open APP, search device “SEARCH DEVICE” and click in turn Multiple available devices could be searched
2. Press ” ” to slide to the left, click “EDIT” to change device name,Click “DELETE” to delete device
IFEELINGU
Click here to search available device
SEARCH DEVICE
III. Connect Device Control connection/disconnection of current device Control
ON/OFF of current device
IV. Multi – lamp Combination and Connection 1. Click” “to enter”
Group”interface; click
” CREATE GROUP “below to search available device; then select available device
Create multi-lamp combination (see Fig. 1), and five devices could be
connected at the same time 2. After creating multi-lamp combination,
combination lamp name can be changed in the box that pops out (See Fig. 2)
Home iLightU Bright
IFEELINGU SEARCH DEVICE
Create Group
iLightU
iLightU
iLightU
iLightU
iLightU
CANCEL CONFIRM
Fig. 1
Set Group Name
Combination lamp name can be changed here
CANCEL CONFIRM Fig. 2
V. Toning Interface Click” “to enter toning interface
Synchronize the present light color parameters to device
Save the present color
White Bright ” CCT MODE “mode switching and current color display CCTColor
temperature adjustment Bright: Luminance adjustment
Color Bright
“HSI MODE “mode switching and present color display
Color Panel
White Bright Color Bright
CCT65 K
Bright 100%
HSI RGB CMYK LAB
H:26°
S:88%
Color Panel
I100%
HSI RGB CMYK LAB Set light color according to four different color models
I100% Adjust luminance of HIS color model
ColorPanel Set light color parameters Built-in preset different light colors Effect mode, 10 light effects available Collected light color (find saved colors here)
FCC Caution This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>