HELLER BFH70 Mini Bar Fridge Instruction Manual

HELLER BFH70 Mini Bar Fridge

Safety information

Installation

• Important! For electrical connection carefully follow the instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages to it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case, retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back into the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation.
• Wherever possible the spacers of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burns.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.

Service

• Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Center, and only genuine spare parts must be used.

Energy saving

• Don’t put hot food in the appliance;
• Don’t pack food close together as this prevents air from circulating;
• Make sure food doesn’t touch the back of the compartments);
• If electricity goes off, don’t open the doors):
• Don’t open the door(s) frequently;
• Don’t keep the doors) open for too long time;
• Don’t set the thermostat to exceeding cold temperatures;
• Some accessories, such as drawers, can be removed to get larger storage volumes and lower energy consumption.

Safety information
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold so that everyone using it throughout its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user’s instructions as the manufacturer is not responsible for damages caused by omission.

Children and vulnerable people’s safety

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given super vision or instruction concerning the use of the appliance in a safe way and understand the hazards involved,
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are aged 8 years and above and supervised.
• Keep all packaging well away from children. There is a risk of suffocation.
• If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children from suffering electric shock or closing themselves into it.
• If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety
WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING! Do not damage the refrigerant circuit.

Safety information
WARNING! Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer.
WARNING! Do not touch the light bulb if it has been on for a long period because it could be very hot.”

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.
• During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged
• avoid open flames and sources of ignition
• thoroughly ventilate the room in which the appliance is situated
• It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire and/or electric shock.
• This appliance is intended to be used in households and similar applications such as
• staff kitchen areas in shops, offices and other working environments;
• farmhouses and by clients in hotels, motels and other residential-type environments;
• bed and breakfast type environments;
• catering and similar non-retail applications.

WARNING! Any electrical components(plug, power cord, compressor, etc.) must be replaced by a certified service agent or qualified service personnel.
WARNING! The light bulb supplied with this appliance is a “special use lamp bulb” usable only with the appliance supplied. This “special use lamp” is not usable for domestic lighting.” This product contains flammable refrigerant isobutane (R600a). It is hazardous for anyone other than an Authorized Service Person to service this appliance. In Queensland – the authorized Service Person MUST hold a Gas Work Authorization for hydrocarbon refrigerants, to carry out Servicing or repairs which involve the removal of covers. where scene the comeshimon

Safety information

• Make sure that the power plugin is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire.
• Make sure that you can come to the mains plug of the appliance.
• Do not pull the main cable.
• If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
• You must not operate the appliance without the lamp.
• This appliance is heavy. Care should be taken when moving it.
• Do not remove nor touch items from the freezer compartment it your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct sunlight.

Daily use

• Do not put hot on the plastic parts in the appliance.
• Do not place food products directly against the rear wall.
• Frozen food must not be re-frozen once it has been thawed out.”
• Store pre-packed frozen food by the frozen food manufacturer’s instructions.”
• Appliance’s manufacturing storage recommendations should be strictly adhered to. Refer to relevant instructions.
• Do not place carbonated fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.”
• Ice lollies can cause frost burns if consumed straight from the appliance.”
• If the supply cord is damaged it must be replaced by the manufacturer, service agent or similarly qualified persons to avoid a hazard.
• Do not replace the LED lamp yourself, it must only be replaced by either the manufacturer or the authorised service agent.

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove trost trom the appliance. Use a plastic scraper.”
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in te bottom of the appliance.”
• All there is a fresh-Fooorage compartment.

Environment Protection
This appliance does not contain gasses that could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed of according to the appliance regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially the heat exchanger. The materials used on this appliance marked by the symbol o are recyclable.

The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. For more detailed information about recycling this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

Packaging materials

The materials with the symbol are recyclable. Dispose of the packaging in suitable collection containers to recycle it.

Disposal of the appliance

1. Disconnect the mains plug from the mains socket.
2. Cut off the main cable and discard it.

Overview

1. Chiller Compartment
2. Temperature Control
3. Water Drip Tray
4. Large Shelf
5. Small Shelf
6. Leveling Leg
7. Top Hinge with Cover
8. upper Door Bar
9. 2-Liter Bottle Door Bar
10. Adjustable Door Bin
11. Lower Door Bin

Reverse Door
Tool required: Philips screwdriver, Flat-bladed screwdriver, Hexagonal spanner. To take the doors is necessary to try the unit backwards. You should rest the unit on something solid so that it will not slip during the door- reversing process.
All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system.  2 people should handle the unit during assembly.

1. Remove the top right hinge cover.
2. Undo the screws. Then remove the hinge bracket.
3. Remove the top left screw cover.
4. Move the core cover from the left side to the right side. Then lift the upper door and place it on a padded surface to prevent it from scratching.
5. Unscrew the bottom hinge. Then remove the adjustable feet from another side.
6. Unscrew and remove the bottom hinge pin with flat screwdrivers, turn the bracket over and replace the pin.
7. Refit the bracket fitting the bottom hinge pin. Replace the adjustable foot.
8. Pertie thy so that the seas are closed on his sides before finally and tightening the top hinge.
9. Insert the hinge bracket and screw it to the top of the unit.
10. Use a spanner to tighten it if necessary.

Daily Use

Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.

Temperature Setting
Plug on your appliance. The internal temperature is controlled by a thermostat. There are 6(8)settings. 1 is the warmest setting 5 (7)is the coldest 3010n9 and 01501 The appliance may not operate at the correct temperature if it is in a particular not ort you open the door Owen.

Movable shelf
The shelf can be moved to suitable positions.

Positioning the door balconies
To store food or beverages of different sizes, the door balconies can be placed at different heights. Follow the below process to adjust the shelves. So  the balcony to be rond ros the balcony lo two convex plates until lie finally

Vegetable Drawer
The drawer is suitable for storing fruit and vegetables. It can be pulled out freely.

Thawing
Deep-frozen or frozen food, before being used, can be thawed in a fridge compartment or at room temperature. Place the frozen food in a dish or bowl to avoid the flowing of condensate water when thawing it in the compartment.

Helpful hints and tips
Hints for fresh food refrigeration To obtain the best performance: do not store warm food or evaporating liquids in the refrigerator position food so that air can circulate freely around it Hints for refrigeration

Useful hints
Meat (all types): wrap in polythene bags and place on the glass shelf above the vegetable drawer. For safety, store in this way for only one or two days at the most. Fruit and vegetables: this should be thoroughly covered and paced in the vegetable Cooked foods, cold dishes, etc… should be covered and may be placed on any shelf. drawer.

Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.

Cleaning
For hygienic reasons, the appliance interior, including interior accessories, should be cleaned regularly.
Caution! The appliance may not be connected to the mains during cleaning. The danger of electrical A check on along smash place ed to remove the pug trom age, or electric off or turn out the circuit breaker or fuse. Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, the danger of electrical shock! Hot vapours can lead to damage to plastic parts. The appliance must be dry before it is placed back into service.

Important!
Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice from orange peel, butyric acid, a cleanser that contains acetic acid. Do not allow such substances to come into contact with the appliance parts. Do not use any abrasive cleaners Remove the food from the freezer. Store them in a cool place, well covered. Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker of the fuse.

Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe with fresh water and rub dry. Accumulation of dust at the condenser increases energy consumption. For this reason, carefully clean
the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner. aner everyning is dry place applance bock Into service.

Installation

Space Requirement

• Select a location without direct exposure to sunlight;
• Select a location with enough space for the refrigerator doors to open easily:
• Select a location with level (or nearly level) flooring;|
• Allow sufficient space to install the refrigerator on a flat surface;
• Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

Levelling the unit
To do this adjust the two levelling feet at front of the unit. If the unit is not level, the doors and magnetic seal alignments will not be covered properly.

Positioning
India tends on the rating plate option appropriate ambient temperature corresponds to the climate class

Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure the best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm. Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet. Warning! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer declines all responsibility if the above safety precautions are not observed. This appliance complies with the E.E.C. Directives.

Defrosting
The evaporator, however, will become progressively covered with frost. This should be removed. Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. However, when the ice becomes very thick on the evaporator, complete defrosting should be carried out as follows: pull out the plug from the socket; remove all stored food, wrap it in several layers of newspaper and put it in a cool place; | keep the door open, and place a basin underneath the appliance to collect the defrost water; when defrosting is completed, dry the interior thoroughly replace the plug in the power socket to run the appliance again.

Troubleshooting

Caution! Before troubleshooting, disconnect the power supply. Only a qualified electrician of competent person must do the troubleshooting that is not in this manual.
Important! There are some sounds during normal use (compressor, refrigerant circulation).| If the malfunction occurs again, contact the Service Center. These data are necessary to help you quickly and correctly. Write the necessary data here, refer to the rating plate.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>