speedlink SL-630013-BKBK Ceptica Wireless Mouse User Guide
- June 10, 2024
- speedlink
Table of Contents
speedlink SL-630013-BKBK Ceptica Wireless Mouse
Product Information
The product is a wireless mouse that operates on AA batteries with a voltage
of 1.5V. The mouse has a DPI switch and comes with a USB receiver that needs
to be plugged into a free USB port on a PC for the mouse to function. The
mouse has a standby mode that activates after 8 minutes of inactivity and can
be reactivated by pressing any button.
The product conforms to the requirements listed under the ‘conformity notice’
and improper storage or disposal may harm the environment and/or human health.
Therefore, it is advised not to dispose of the product with household waste
and to check your local waste disposal options and take it to a recycling
point.
Product Usage
- Insert AA batteries with 1.5V voltage into the mouse.
- Switch the DPI according to your preference.
- Plug the USB receiver into a free USB port on your PC.
- The mouse will automatically connect to the receiver.
- If the mouse goes into standby mode after 8 minutes of inactivity, press any button to reactivate it.
- Move the mouse to navigate and click the buttons to perform actions on your PC.
- When disposing of the product, do not throw it away with household waste. Check your local waste disposal options and take it to a recycling point.
Technical support
-
Technical support: www.speedlink.com
-
Safety instructions: www.speedlink.com
WEEE : Do not dispose of the product with household waste. -
Check your local waste disposal options and take to a recycling point. Improper storage/disposal may harm the environment and/or human health. Speedlink declares that the product conforms to the requirements listed under the ‘conformity notice’.
-
This product uses alkaline-manganese or zinc-carbon batteries. Before disposal, make sure that the batteries have no remaining charge. Do not dispose of with household waste and check your local waste disposal options. Carefully remove the batteries and take them to a collection point or shop.
-
For more information: www.speedlink.com.
OVERVIEW
INTENDED USE
This product is intended to be used as an input device for connecting to a
computer and is for indoor home/office use only. It contains no user-
serviceable parts. Do not disassemble it and stop using it immediately if
damaged. Speedlink GmbH accepts no liability whatsoever for any damage to this
product or injuries caused due tocareless or improper use or for purposes for
which it is not intended.
Please keep this information for later reference
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Please note that the failure to observe these instructions can cause product damage, explosion, fire and/or electric shocks
- Only use this device as indicated in the user guide. Do not open or repair it.
- Do not expose the device to liquids, heat or cold.
- Do not use the device in a damp environment. Clean the device with a dry cloth.
- Keep the device and all loose parts away from children, pets, and unauthorized persons.
- Only use the device with the appropriate provided USB charging cable and with a USB-A port.
- Disconnect the charging cable from the device if it will not be used for a long time. When disconnecting the cable, don’t pull on the cord but on the plug.
- Don’t use the cables in any way other than mentioned in the user guide; don’t bend, cut, extend, knot or step on them.
- Do not insert any foreign objects into the openings of the device.
- If the device is damaged in any way or gets too hot, stop using it immediately.
- Take caution when using the device if you have a pacemaker or are dependent on other sensitive electronic life aids, as the device emits radio signals.
Safety instructions in further languages: www.speedlink.com.
WARNING SYMBOLS AND MARKINGS
Extended use of input devices may cause health problems such as discomfort or pain; as such, take regular breaks and consult a doctor if problems persist
CONFORMITY NOTICE
Operation of the device (the devices) may be affected by strong static,
electrical or high-frequency fields (radio installations, mobile telephones,
microwaves, electrostatic discharges). If this occurs, try increasing the
distance from the devices causing the interference.
Conformity notice in further languages:
www.speedlink.com.
CONFORMITY NOTICE
IMPORTER/MANUFACTURER: Speedlink GmbH Im Dorf 5 27404 Heeslingen GERMANY
Phone : (+49) 4287 9244-0
PRODUCT DETAILS:
Product no.: SL-630013-BKBK SL-630013-BKRD
Type Description : CEPTICA Mouse – Wireless, black
CEPTICA Mouse – Wireless, black-red
THE PRODUCT COMPLIES WITH THE FOLLOWING DIRECTIVES:
RED 2014/53/EU
RoHS 2011/65/EU
For a full declaration of conformity, the latest user guide or FAQ, please
visit www.speedlink.com.
RF frequency range : 2.402GHz – 2.480GHz
RF power transmission : < 0dBm
Further information: www.speedlink.com
All rights reserved. Speedlink, the Speedlink word mark and the Speedlink
swoosh are registered trademarks of Zeitfracht GmbH & Co. KGaA.
Windows and the Windows logo are registered trademarks of Microsoft
Corporation. macOS is a registered trademark of Apple Inc. The Instagram logo
is a registered trademark/service mark of Instagram LLC. The Facebook logo is
a registered trademark of Facebook Inc. The YouTube logo is a registered
trademark of YouTube LLC. All trademarks are the property of their respective
owner. Technical specifications are subject to change.
Information contained herein is subject to change without prior notice.
Speedlink GmbH shall not be made liable for any errors that may appear. Please
keep this information for later reference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>