speedlink SL-330402-RRBK RAIT Bluetooth Gamepad User Guide
- June 3, 2024
- speedlink
Table of Contents
speedlink SL-330402-RRBK RAIT Bluetooth Gamepad User Guide
]]
GET STARTED
1. FIRST TIME USAGE:
To pair the controller with a Nintendo Switch* console for the first time,
press and hold the Y button and home button simultaneously. All four channel
LEDs will flash and the controller
will pair with the console. Press and hold the home button for any future
pairing.
2. CHANNEL LEDs:
The channel LEDs indicate whether the controller is paired with the console. Depending on the channel of each player, different LEDs will light up after pairing.
3. RAPID FIRE MODE:
Press and hold the button you want to set into rapid fire mode, then press the
rapid fire button. The rapid fire LED will light up when rapid fire mode is
turned on. To turn off rapid fire mode,
repeat the procedure.
Technical support: www.speedlink.com
Safety instructions: www.speedlink.com
WEEE: Dispose the product at a recycling point. Do not dispose together with
household waste. Incorrect storage/ disposal can harm the environment and/or
cause injury.
Speedlink declares that this product complies with the directives listed in
the section ‘Conformity notice’
INTENDED USE
This product is intended to be used as an input device for connecting to a
video game console and is for indoor home/office use only. It contains no
user-serviceable parts. Do not disassemble
it and stop using it immediately if damaged. Speedlink GmbH accepts no
liability whatsoever for any damage to this product or injuries caused due to
careless or improper use or for purposes for
which it is not intended. Please keep this information for later reference.
The latest user guide can always be found on the product page at
www.speedlink.com.