speedlink SL-810200-BK BRIO Stereo Soundbar User Guide
- June 4, 2024
- speedlink
Table of Contents
speedlink SL-810200-BK BRIO Stereo Soundbar
- Connect the soundbar’s USB cable to a free USB port on your PC, laptop or another power source and plug the audio input & headphone cable into your audio device.
- A headphone/microphone can be used by plugging it into the headphone/microphone socket at the front of the soundbar. The microphone extension cable must be connected to your computer when using a microphone or headset.
- Turn the soundbar on by rotating the volume control clockwise. Rotating the volume control counter-clockwise until a click can be heard will turn the soundbar off.
Technical support: www.speedlink.com
Safety instructions: www.speedlink.com
WEEE: Dispose the product at a recycling point. Do not dispose together with
household waste. Incorrect storage/disposal can harm the environment and/or
cause injury.
Speedline declares that this product complies with the directives listed in
the section ‘Conformity notice’.
INTENDED USE
This product is intended to be used as a speaker system for connecting to a
computer/other audio source and is for indoor home/office use only. It
contains no user-serviceable parts. Do not disassemble it and stop using it
immediately if damaged. Speedlink GmbH accepts no liability whatsoever for any
damage to this product or injuries caused due to careless or improper use or
for purposes for which it is not intended.
Please keep this information for later reference.
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Please note that the failure to observe these instructions can cause product damage, explosion, fire and/or electric shocks!
- Only use the devices as indicated in the user guide. Do not open or repair them.
- Do not expose the devices to liquids, heat or cold.
- Do not use the devices in a damp environment. Clean the device with a dry cloth.
- Keep the devices and all loose parts away from children, pets and unauthorized persons.
- Only use the devices with the appropriate provided accessories/cables.
- Disconnect cables from the devices if they will not be used for a long time. When disconnecting the cables, don’t pull on the cord but on the plug.
- Don’t use the cables in any way other than mentioned in the user guide; don’t bend, cut, extend, knot or step on them.
- Do not insert any foreign objects into the openings of the device. If the devices are damaged in any way or get too hot, stop using them immediately.
- Take caution when using devices that emit radio signals if you have a pacemaker or are dependent on other sensitive electronic life aids.
WARNING SYMBOLS AND MARKINGS
Avoiding hearing damage.
Further information: www.speedlink.com
CONFORMITY NOTICE
Operation of the device (the devices) may be affected by strong static,
electrical or high-frequency fields (radio installations, mobile telephones,
microwaves, electrostatic discharges). If this occurs, try increasing the
distance from the devices causing the interference.
Conformity notice in further languages:
www.speedlink.com
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.
CONFORMITY NOTICE
IMPORTER/MANUFACTURER:
Speedlink GmbH
Im Dorf 5
27404 Heeslingen
GERMANY
Phone: (+49) 4287 9244-0
PRODUCT DETAILS:
Type description: BRIO Stereo Soundbar, black
THE PRODUCT COMPLIESWITH THE FOLLOWING DIRECTIVES:
EMC 2014/30/EU
RoHS 2011/65/EU
For a full declaration of conformity, the latest user guide or FAQ, please
visit www.speedlink.com.
Further information: www.speedlink.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>