speedlink SL-670013-BK VELA LED Mechanical Gaming Keyboard User Guide

: June 4, 2024
: speedlink

Table of Contents

speedlink SL-670013-BK VELA LED Mechanical Gaming Keyboard
3 CUSTOMIZABLE ILLUMINATION MODES
INTENDED USE
SAFETY INSTRUCTIONS
CONFORMITY NOTICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

speedlink SL-670013-BK VELA LED Mechanical Gaming Keyboard

speedlink-PRODUCT

3 CUSTOMIZABLE ILLUMINATION MODES

To change between the 3 customizable illumination modes press

FN+1, FN+2, FN+3
Default settings for illumination as follows

FN+1 FPS mode
Illuminated keys: W A S D ↑ ↓ ← →
FN+2 LOL mode
Illuminated keys: Q W E R D G F B V L-Ctrl L-Alt Tab Space 1-6 Esc
FN+3 Office mode
Illuminated keys: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ ] ; ’ . , / ↑ ↓ ← →

To customize the illumination modes proceed as follows:
Select one of the 3 modes by pressing FN+1/2/3 and press
FN+ PrtSc to start the recording:

During recording, all keys are off at the beginning.
Key lights on by pressing the key. Repeat step B, until satisfied.
To finish and save the recording press again FN+ PrtSc

Note: After saving the recorded illumination mode, the selected default illumination mode will be replaced by the recorded mode.

To reset to default mode, press FN+ESC for 3 seconds, all recorded modes will be reset to default.

8 PRE-PROGRAMMED ILLUMINATION MODES
To change between the 8 pre-programmed illumination modes press FN + ScrLK and release the keys.

To adjust lighting brightness and lighting speed press “FN + ↑” & “FN + ↓”and “FN + ←” & “FN + →”

FRONT-ILLUMINATION
To change between the 2 illumination modes and off press FN + menu button and release the keys.

Technical support: www.speedlink.com
Safety instructions: www.speedlink.com/en/Safety- instructions
WEEE: Dispose the product at a recycling point. Do not dispose of together with household waste. Incorrect storage/ disposal can harm the environment and/or cause injury. Speedlink declares that this product complies with the directives listed in the section ‘Conformity notice’.

INTENDED USE

This product is intended to be used as an input device for connecting to a computer and is for indoor home/office use only. It contains no user- serviceable parts. Do not disassemble it and stop using it immediately if damaged. Speedlink GmbH accepts no liability whatsoever for any damage to this product or injuries caused due to careless or improper use or for purposes for which it is not intended. Please keep this information for later reference.

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS
Please note that the failure to observe these instructions can cause product damage, explosion, fire and/or electric shocks!

Only use the devices as indicated in the user guide. Do not open or repair them.
Do not expose the devices to liquids, heat or cold.
Do not use the devices in a damp environment. Clean the device with a dry cloth.
Keep the devices and all loose parts away from children, pets and unauthorized persons.
Only use the devices with the appropriate provided accessories/cables.
Disconnect cables from the devices if they will not be used for a long time. When disconnecting the cables, don’t pull on the cord but on the plug.
Don’t use the cables in any way other than mentioned in the user guide; don’t bend, cut, extend, knot or step on them.
Do not insert any foreign objects into the openings of the device.
If the devices are damaged in any way or get too hot, stop using them immediately.
Take caution when using devices that emit radio signals if you have a pacemaker or are dependent on other sensitive electronic life aids.

Safety instructions in further languages:
www.speedlink.com/en/Safety-instruction

WARNING SYMBOLS AND MARKINGS
Extended use of input devices may cause health problems such as discomfort or pain; as such, take regular breaks and consult a doctor if problems persist.
CONFORMITY NOTICE
Operation of the device (the devices) may be affected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwaves, electrostatic discharges). If this occurs, try increasing the distance from the devices causing the interference.
Conformity notice in further languages:
www.speedlink.com/en/Safety-instructions.

CONFORMITY NOTICE

IMPORTER/MANUFACTURER:
Speedlink GmbH
Im Dorf 5
27404 Weertzen
GERMANY
Phone: (+49) 4287 9244-0
PRODUCT DETAILS:
Product no.: SL-670013-BK
SL-670013-BK-US
Type description: VELA LED Mechanical Gaming
Keyboard, black
VELA LED Mechanical Gaming
Keyboard, black – US Layout
THE PRODUCT COMPLIES WITH THE FOLLOWING DIRECTIVES:
EMC 2014/30/EU
RoHS 2011/65/EU
For a full declaration of conformity, please visit the product page at www.speedlink.com and scroll to Downloads. Also the latest user guide can always be found on the product page. Further information: www.speedlink.com

All rights reserved. Speedlink, the Speedlink word mark and the Speedlink swoosh are registered trademarks of Zeitfracht GmbH & Co. KG. The Instagram logo is a registered trademark/service mark of Instagram LLC. The Facebook logo is a registered trademark of Facebook Inc. The YouTube logo is a registered trademark of YouTube LLC. All trademarks are the property of their respective owner. Speedlink GmbH shall not be made liable for any errors that may appear in this manual. Information contained herein is subject to change without prior notice. Please keep this information for later reference