speedlink SL-650010-BK RAIT Gamepad User Guide

USER GUIDE
RAIT GAMEPAD

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

**** Please note that the failure to observe these instructions can cause product damage, explosion, fire, and/or electric shocks!

• Only use this device as indicated in the user guide.
  Do not open or repair it.

• Do not expose the device to liquids, heat or cold.

• Do not use the device in a damp environment.
  Clean the device with a dry cloth.

• Keep the device and all loose parts away from children, pets, and unauthorized persons.

• Only use the devices with the appropriate provided accessories/cables.

• Disconnect the charging cable from the device if it will not be used for a long time. When disconnecting the cable, don’t pull on the cord but on the plug.

• Don’t use the cables in any way other than mentioned in the user guide; don’t bend, cut, extend, knot or step on them.

• Do not insert any foreign objects into the openings of the device
  If the device is damaged in any way or gets too hot, stop using it immediately.

• Take caution when using the device if you have a pacemaker or are dependent on other sensitive electronic life aids, as the device emits radio signals.
  Safety instructions in further languages: www.speedlink.com/en/Safety- instructions.

GET STARTED

DOWNLOAD THE SOFTWARE
AT: www.speedlink.com

SOFTWARE INSTALLATION

Always download the latest driver software for the best possible performance. You can find it on the Speedlink website at www.speedlink.com. You will need to install the
software to use the vibration function with some games.

CONNECTION SETTINGS:

PLAYSTATION 3 TM **
Connect the USB cable to the PS3® console USB port.
NINTENDO SWITCH TM**

1. On your Nintendo Switch, select the menu item “System
   Settings” → “Controllers and Sensors” → “Pro Controller Wired Communication”. Select “on”.

2. Connect the USB cable to the Nintendo Switch TM  charging dock.
   PC
   Connect the USB cable to the computer’s USB port.

3. **PC – XINPUT UND DirectInput**
   Press and hold the „Mode“ button for six seconds to switch between the gamepad‘s two modes of operation: XInput (for most of the latest games) and DirectInput (for all older and some of the newer). Please set the gamepad to the desired mode before you start a game. Switching while a game is running may cause the controller to not be recognized correctly by the game; in this case please restart the game. To find out which mode works best for a game, please refer to the manual, contact the manufacturer or try it out.

4. RAPID FIRE FUNCTION
   The rapid-fire function will activate key several times in rapid succession as long as it is pressed. To do this, keep the „Rapid“ key pressed and simultaneously press the key for which the function is to be activated. To set the key back to single fire mode, press the key again while holding down the „Rapid“ key.

5. SETTINGS
   Test the gamepad’s functions by opening the Windows Settings and searching for “Set up USB game controllers“. In DirectInput mode, you will also find the options there for the vibration function; for XInput games, configure the vibration functions in the game’s options settings. Please note, vibration functions only work if supported by the game and the relevant option is enabled in the game’s options settings.

WARNING SYMBOLS AND MARKINGS

CONFORMITY NOTICE
Operation of the device (the devices) may be affected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwaves, electrostatic discharges). If this occurs, try increasing the distance from the devices causing the interference.
Conformity notice in further languages: www.speedlink.com/en/Safety- instructions.

CONFORMITY NOTICE

IMPORTER/MANUFACTURER:
Speedlink GmbH
I’m Dorf 5
27404 Heeslingen
Deutschland
Phone: (+49) 4287 9244-0
PRODUCT DETAILS:
Product no.: SL-650010-BK
Type Description: RAIT Gamepad – for PC/PS3*/Switch, rubber-black
THE PRODUCT COMPLIES
WITH THE FOLLOWING DIRECTIVES:
EMC 2014/30/EU
RoHS 2011/65/EU
For a full declaration of conformity, please visit the product page at www.speedlink.com and scroll to Downloads. Also the latest user guide can always be found on the product page. Further information: www.speedlink.com

*Windows and DirectInput are registered trademarks of Microsoft Corporation in the United States and other countries. Nintendo Switch is a registered trademark of Nintendo Co., Ltd. PlayStation 3 and PS3 are registered trademarks of Sony Computer Entertainment Inc. All rights reserved. Speedlink, the Speedlink word mark and the Speedlink swoosh are registered trademarks of Zeitfracht GmbH & Co. KGaA. The Instagram logo is a registered trademark/service mark of Instagram LLC. The Facebook logo is a registered trademark of Facebook Inc. The Twitter logo is a registered trademark of Twitter Inc. The YouTube logo is a registered trademark of YouTube LLC. All trademarks are the property of their respective owner. Speedlink GmbH shall not be made liable for any errors that may appear in this manual. Information contained herein is subject to change without prior notice. Please keep this information for later reference.

www.speedlink.com 
SL-650010-BK
VER. 1.0

References

• Speedlink - hochwertiges, preiswertes PC-Zubehör für Gaming und Office.
• speedlink
• Safety instructions
• Sicherheitshinweise
• speedlink
• speedlink

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>