speedlink SL-260003-BK JUIZZ USB Dual Charger User Guide
- June 4, 2024
- speedlink
Table of Contents
speedlink SL-260003-BK JUIZZ USB Dual Charger
PRODUCT DESCRIPTION
- Connect the charger to a USB power source using the charging cable provided.
- Insert the battery packs into the charger as illustrated.
- While charging, the status LEDs light up.
- The status LEDs turn off once the charging process has been completed.
INTENDED USE
This product is intended to be used as a controller charger for a video game
console and is for indoor home/office use only.
It contains no user-serviceable parts. Do not disassemble it and stop using it
immediately if damaged. Speedlink GmbH accepts no liability whatsoever for any
damage to this product or injuries caused due to careless or improper use or
for purposes for which it is not intended.
Please keep this information for later reference.
Technical support: www.speedlink.com
Safety instructions: www.speedlink.com
WEEE: Do not dispose of the product with household waste. Check your local waste disposal options and take to a recycling point. Improper storage/disposal may harm the environment and/or human health. Speedlink declares that the product conforms to the requirements listed under the ‘conformity notice’.
This product contains a nickel-metal hydride battery.
Before disposal, make sure that the batteries have no remaining charge. Do not
dispose of with household waste and check your local waste disposal options.
Carefully remove the batteries and take them to a collection point or shop.
For more information: www.speedlink.com.
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Keep the battery contacts away from metal objects of any kind. Improper
contact with metal can result in short-circuiting, overheating or fire.
Only use the supplied battery packs with the charger.
Only use the battery packs with Xbox Series X/S or Xbox One controllers.
Please note that the failure to observe these instructions can cause product
damage, explosion, fire and/or electric shocks!
-
Only use this device as indicated in the user guide.
Do not open or repair it. -
Do not expose the device to liquids, heat or cold.
-
Do not use the device in a damp environment.
Clean the device with a dry cloth. -
Keep the device and all loose parts away from children, pets and unauthorized persons.
-
Only use the devices with the appropriate provided accessories/cables.
-
Disconnect the charging cable from the device if it will not be used for a long time. When disconnecting the cable, don’t pull on the cord but on the plug.
-
Don’t use the cables in any way other than mentioned in the user guide; don’t bend, cut, extend, knot or step on them.
-
Do not insert any foreign objects into the openings of the device.
-
If the device is damaged in any way or gets too hot, stop using it immediately.
-
Take caution when using the device if you have a pacemaker or are dependent on other sensitive electronic life aids, as the device emits radio signals.
Safety instructions in further languages: www.speedlink.com
WARNING SYMBOLS AND MARKINGS
CONFORMITY NOTICE
Operation of the device (the devices) may be affected by strong static,
electrical or high-frequency fields (radio installations, mobile telephones,
microwaves, electrostatic discharges). If this occurs, try increasing the
distance from the devices causing the interference.
Conformity notice in further languages: www.speedlink.com
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.
CONFORMITY NOTICE
IMPORTER/MANUFACTURER:
Speedlink GmbH Im Dorf 5 27404 Heeslingen GERMANY
Phone: (+49) 4287 9244-0
PRODUCT DETAILS:
Product no.: SL-260003-BK
Type description: JUIZZ USB Dual Charger for Xbox Series X*/S, black
THE PRODUCT COMPLIES
WITH THE FOLLOWING DIRECTIVES:
EMC 2014/30/EU
RoHS 2011/65/EU
For a full declaration of conformity, the latest user guide or FAQ, please visit www.speedlink.com.
Further information: www.speedlink.com
All rights reserved. Speedlink, the Speedlink word mark and the Speedlink swoosh are registered trademarks of Zeitfracht GmbH & Co. KGaA.
- Xbox, Xbox Series X and Xbox One are registered trademarks of Microsoft Corporation.
This product is neither licensed nor endorsed by Microsoft Corporation.
The Instagram logo is a registered trademark/service mark of Instagram LLC. The Facebook logo is a registered trademark of Facebook Inc. The YouTube logo is a registered trademark of YouTube LLC. All trademarks are the property of their respective owner. Technical specifications are subject to change. Information contained herein is subject to change without prior notice. Speedlink GmbH shall not be made liable for any errors that may appear. Please keep this information for later reference.
