StarTech HDMI-SPLITTER-4K60UP 2 Port Portable HDMI Video Splitter User Guide

StarTech HDMI-SPLITTER-4K60UP 2 Port Portable HDMI Video Splitter

Product Information

The HDMI-SPLITTER-4K60UP is a device that allows you to split an HDMI signal from a single source device to two HDMI-enabled display devices. It supports up to 4K resolution at 60Hz and is compatible with HDMI 2.0 and HDCP 2.2. For the latest manuals, product information, technical specifications, and declarations of
conformance, please visit: www.StarTech.com/HDMI-SPLITTER- 4K60UP

Package Contents

• HDMI-SPLITTER-4K60UP device
• HDMI Input Dongle Cable
• USB Micro-B Cable
• USB Wall Charger
• User Manual

Requirements

• An HDMI source device with an HDMI output port
• Two HDMI-enabled display devices with HDMI input ports
• HDMI cables (not included)
• An available wall outlet
• HDMI Source x 1
• HDMI Display x 2
• HDMI Cables (sold separately) x 2

Installation

Note: Ensure your HDMI Source Device, and the HDMI Displays are powered off before you begin installation.

1. Connect the HDMI Input Dongle Cable on the HDMI Splitter to the HDMI Output Port of your HDMI Source Device.
2. Connect the HDMI cables (not included) from each of the HDMI Output Ports on the HDMI Splitter, to the HDMI Input Port on your HDMI Displays.
   • Note: Each port is numbered, please take note of which number is assigned to each HDMI-enabled display device.
3. Power on each HDMI Display, followed by your HDMI Source Device.
4. Plug in the included USB Wall Charger to an available Wall Outlet.
5. Connect the included USB Micro-B Cable from the USB Wall Charger, to the USB Micro-B Power Port, located on the rear of the HDMI Splitter.
6. Your HDMI Source Device will now display an identical image on each attached HDMI-enabled display device.

Regulatory Compliance

This product complies with FCC Part 15 and Industry Canada Statement regulations. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment

Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device

Warranty Information

This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

StarTech.com Ltd. is not liable for any damages caused by the use or inability to use this product. For more information, please refer to the user manual or contact StarTech.com support.  In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you

StarTech.com Ltd. 45 Artisans Cres London, Ontario N5V 5E9 Canada

OVERVIEW

detection of the HDMI Displays
3| HDMI Output 2| •    Connect to an HDMI Display
4| Display Activity LEDs| •    Solid Blue: Connection to an HDMI Display

detected

5| HDMI Output 1| •    Connect to an HDMI Display
6| USB Micro-B Power Port| •    Connect to the included USB Wall Charger for power
7| Power LED| •    Solid Blue: Indicates if power is being received

StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio 43125 U.S.

StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom

References

• 2-Port HDMI Splitter 1 In 2 Out, 4K 60Hz - HDMI® Splitters | StarTech.com
• You | Fabricant de cuisines aménagées & salles de bains sur-mesure

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>