V-TAC VT-34ST LED Streetlights User Manual
- June 10, 2024
- V TAC
Table of Contents
V-TAC VT-34ST LED Streetlights
Product Information
The LED Street Light is available in four variants: VT-34ST, VT-54ST, VT- 104ST, and VT-154ST. The product has technical specifications of 260 and an IP65 rating. The product contains a light source of energy efficiency class. The product should not be disposed of with other household wastes and there is a risk of electric shock associated with it.
Product Usage Instructions
- Switch OFF the power before starting installation.
- Connect supply wires to the luminaire as displayed in the wiring diagram.
-
- Pass the cable through the mounting adaptor, fix 4 screws on the street light by 6mm allen wrench.
- Fasten 4 screws against the pole by 6mm allen wrench.
- Turn ON the power to test.
If there are any queries or issues with the product, please reach out to the manufacturer at support@v-tac.eu. For more product range and inquiries, please contact the distributor or nearest dealers. The product should only be replaced by a qualified service agent or person to avoid any risks associated with it.
Dimension
TECHNICAL SPECIFICATIONS
INTRODUCTION & WARRANTY
- Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best.
- Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product.
- They are trained and ready to serve you at your best. The warranty is valid for 5 years from the date of purchase.
- The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear.
- The company gives no warranty against damage to any surface due to incorrect removal and installation of the product.
- The products are suitable for 10-12 Hours Daily operation.
- Usage of the product for 24 Hours a day would void the warranty.
- This product is warranted for manufacturing defects only
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Replace any cracked protective shield.
- Minimum distance from lighted objects 1m.
- Proper grounding should be ensured throughout the installation.
- Please read through all following instructions before installing the unit.
- User should prepare all the necessary accessories and spare parts
- (Spare parts not provided) including junction box.
- The raised lighting must be connected to the earth ground.
- Installation must be performed by a qualified electrician.
- Strictly follow these instructions for installing, avoid the intensity of power cable during installing.
- This marking indicates that this product should not be disposed of with other household wastes
- Caution, risk of electric shock.
- ‘This product contains a light source of energy efficiency class ‘, where shall be replaced by the energy efficiency class of the contained light source.
INSTALLATION & WIRING DIAGRAM
INSTALLATION INSTRUCTION
- Switch OFF power before starting installation
- Connect supply wires to luminare as displayed in the wiring diagram.
- (a) Pass the cable through mounting adaptor, fix 4 screws on street light by 6mm allen wrench.
- (b) Fasten 4 screws against the pole by 6mm fallen wrench.
- Turn ON the power to Test
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B