V-TAC VT-92100 Oprawa LED High Bay Instruction Manual
- June 10, 2024
- V TAC
Table of Contents
V-TAC VT-92100 Oprawa LED High Bay
TECHNICAL DATA
MODEL| SKU| WATTS| LUMENS @WIDE CONE| BEAM
ANGLE| CRI| DF| SAFETY CLASS| OPERATION TEMPERATURE|
LIFE SPAN [HOURS]| DIMENSION| INPUT POWER| N.W
(KGS)| MAX MOUNTING HEIGHT
---|---|---|---|---|---|---|---|---|---|---|---|---|---
VT-92100| 7808,7809| 100W| 10200LM| 110°| >70| >0.9| Class I| -20° to +45°C|
25,000| ⌀230x88mm| AC: 175-265V, 50/60Hz| 1.11| <5M
VT-92150| 7810,7811| 150W| 15300LM| 110°| >70| >0.9| Class I| -20° to +45°C|
25,000| ⌀260x88mm| AC: 175-265V, 50/60Hz| 1.45| <5M
VT-92200| 7812,7813| 200W| 20400LM| 110°| >70| >0.9| Class I| -20° to +45°C|
25,000| ⌀310x88mm| AC: 175-265V, 50/60Hz| 2.17| <5M
INTRODUCTION AND WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only
WARNING
-
Please make sure to turn off the power before starting the installation.
-
Installation must be performed by a qualified electrician.
-
The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
-
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
-
Proper grounding should be ensured throughout the installation.
-
Terminal block not included.
-
To be connected with waterproof cable hose.
-
Replace any cracked protective shield.
-
Minimum distance from lighted objects 1m.
Caution, risk of electric shock.
This marking indicates that this product should not be disposed of with other household wastes.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
Step 1: Switch OFF the power
Step 2: Hang the lamp on a hook
Step 3: Connect L, N and Wires
Step 4: Switch ON the power and test
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
[email protected]
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
