ALTA Roller Shades TouchLift with Mounting Bar Instruction Manual

ALTA Roller Shades TouchLift with Mounting Bar

Important: Make sure the mounting surface is level. Brackets must be in line and level for shade to operate properly. Shim brackets if necessary

Install the Brackets

Inside mount (IB)

Inside Mount, install the brackets level and aligned to each other, using the screws provided

Outside mount (OB)

Outside Mount, install the brackets level and aligned to each other, with the plastic tab facing up and approximately 1/2” above the opening on the window frame, window molding, wall, or ceiling using the screws provided

Install the Shade

Inside Mount

• First, position the mounting bar to engage the ridge into the front lip of all brackets. Then, rotate the shade backwards until the mounting bar engages the bracket(s).

Outside Mount

• First, position the mounting bar to engage the ridge into the bottom lip of all brackets. Then, rotate the shade upwards until the mounting bar engages the bracket(s).

Adding Optional top treatment (Fabric Corner or Deluxe valance)

Please refer to Roller Shades – Skyline Fabric Cornice and Deluxe Valance installation instructions

Remove the Shade

(Only if Necessary)

Inside Mount

First, press the release tab on all the brackets. Then, rotate the shade towards the front until the mounting bar disengages from the bracket(s).

Outside Mount

First, press the release tab on all the brackets. Then, rotate the shade towards the front and downward until the mounting bar disengages from the bracket(s).

Child Safety

WARNING

STRANGULATION HAZARD  Young children can be strangled by cords. Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible. Rev 7/21 Print 7/21

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>