InWin NR24-36 All-In-One Nebula Liquid CPU Cooler User Manual

InWin NR24-36 All-In-One Nebula Liquid CPU Cooler

Product Story

Interstellar Cooling

High-Performance AIO Liquid CPU Cooler NR Series will provide your build with stellar visual aesthetics. The water block is filled with crystal shimmering stars and the radiator is equipped with high static pressure fans Luna AL120. Gaze into the realms of Nebula!

Specifications

CPU Socket Support

| Intel®             LGA 1700/ 1200/ 2066/ 2011-V3/ 2011/ 1366/ 1156/ 1155/ 1151/ 1150

AMD®       AM4/ AM3+/ AM3/ AM2+/ AM2/ FM2+/

FM2/ FM1/ TR4

Radiator

| Dimensions (L x W x H)| 277 x 120 x 27 mm

(10.9 x 4.7 x 1.1″)

| 397 x 120 x 27 mm

(15.6 x 4.7 x 1.1″)

Materials| Aluminium
Tube Length| 400 mm| 450 mm
Tube Material| Rubber with Nylon Braided Sleeve

Water Block

| Dimensions (L x W x H)| 87.3 x 75 x 68 mm (3.4 x 3.0 x 2.7″)
Materials| Copper, Glass, Plastic

Pump

| Dimensions (L x W x H)| 66 x 50 x 31 mm

(2.6 x 2.0 x 1.2″)

Materials| PPS GF
Pump Speed| 5200 +/- 10% RPM

Fan

| Model| Luna Series AL120
Quantity Included| 2 PCS| 3 PCS
Dimensions (L x W x H)| 120 x 120 x 25 mm

(4.7 x 4.7 x 1.0″)

Speed Mode| PWM 400-1800 +/- 10% RPM
Noise Level| 25 dB(A) (Normal)
Airflow| 82.96 CFM
Static Pressure| 2.31 mm / H2O
Connectors| 4-Pin (12V, PWM), 3-Pin (5V, ARGB)
Rated Voltage| DC 12V
Bearing Type| Long Lifespan Sleeve Bearing
Package Dimensions (L x W x H)| 331 x 265 x 136 mm

(13 x 10.4 x 5.4″)

| 459 x 244 x 136 mm

(18.1 x 9.6 x 5.4″)

Net Weight| 0.85 kg / 1.87 lb| 1.05 kg / 2.31 lb
Gross Weight| 2.0 kg / 4.41 lb| 2.45 kg / 5.4 lb
Warranty| 3 Years

• InWin’s products comply with RoHS regulation.
• Specifications may vary based on different regions.

NR24 Package Contents

1. QR Code Card x 1

2. Intel Mounting Bracket x 2

3. AMD Mounting Bracket x 2

4. Luna AL120 Fans x 2

5. Intel CPU Backplate x 1

6. Standoff Screws x 4
   (LGA 20XX)

7. Standoff Screws x 4
   (LGA 115X/1200/1366)

8. Standoff Screws x 4
   (LGA 1700)

9. Standoff Screws x 4 (AMD)

10. Standoff Screws x 4 (TR4)

11. 240 Radiator x 1

12. ARGB Water Block Cable x 1

13. ARGB Fan Cable x 1

14. PWM Fan Cable x 1

15. Washer x 8

16. Fan Screws x 8

17. Radiator Screws x 8

18. ARGB One-Click Controller x 1

19. Thumbscrew Caps x 4

20. Thermal Compound x 1

NR36 Package Contents

1. QR Code Card x 1

2. Intel Mounting Bracket x 2

3. AMD Mounting Bracket x 2

4. Luna AL120 Fans x 3

5. Intel CPU Backplate x 1

6. Standoff Screws x 4
   (LGA 20XX)

7. Standoff Screws x 4
   (LGA 115X/1200/1366)

8. Standoff Screws x 4
   (LGA 1700)

9. Standoff Screws x 4 (AMD)

10. Standoff Screws x 4 (TR4)

11. 360 Radiator x 1

12. ARGB Water Block Cable x 1

13. ARGB Fan Cable x 1

14. PWM Fan Cable x 1

15. Washer x 12

16. Fan Screws x 12

17. Radiator Screws x 12

18. ARGB One-Click Controller x 1

19. Thumbscrew Caps x 4

20. Thermal Compound x 1

Installation Guide

• Please follow the related chapters to assemble.
• Please use the original provided accessories to avoid damage to the product.

Install AL120 Fans to Radiator
Parts Required：240 mm/360 mm radiator, Luna AL120 Fans, Washers,

Note： Please be sure to use a washer on each screw before installation.

Install Fans and Radiator combo to your PC chassis.

Parts Required ：Radiator Screws

Installation for motherboards

1. For Intel Motherboards (LGA 115X/1200/1366/20XX/1700)
   Switch the Intel backplate pins according to the CPU socket of your motherboard.
   Note: Intel LGA 20XX does not require back plate installation.

2. Attach the Intel backplate to the bottom of the motherboard.
   Note : Intel LGA 20XX does not require backplate installation.

3. Install the standoff screws onto your motherboard. Ensure to use the correct standoff screws for your CPU socket.
   Parts Required ：Standoff Screws (LGA115X/1200/1366/20XX/1700)

For AMD Motherboards (AMD or TR4)

1. Please remove the retention module. AMD’s backplate comes with AMD’s motherboard. Attach it to the bottom of motherboard.
2. Install the standoff screws onto your motherboard. Ensure to use the correct standoff screws for your CPU socket.
   Parts Required： Standoff Screws (AMD or TR4)

 Install the Pump Unit

1.  Choose your Mounting Bracket according to your CPU
   Parts Required: Intel or AMD Mounting Brackets, Thumbscrew Cap, Thermal Compound

2. Apply the Thermal Compound evenly on the CPU surface

3. Remove the protect film from the cold-plate

4. Install the water block and then tighten it with the Thumbscrews

Connection Cables

Parts Required: PWM Fan Cable, ARGB Fan Cable, ARGB Water Block Cable,

Pump Cable

•  If your M/B does not have an AIO_Pump, you can connect the 3 Pin to a fan header, but it is recommended to set the output to DC 12V.

ARGB One-Click Controller Installation

If your motherboard does not support ARGB effects, please use the included ARGB One-Click Controller in order to use the 14 lighting modes.

Hold the button to turn on or off the lights. Tap the button to change the lighting modes.

1. Rainbow
2. LED-Red Breathing
3. LED-Green
4. LED-Blue
5. LED-Purple
6. LED-White
7. Light at the endof the Tunnel
8. Two-Tone Ring
9. Diagonal Transition
10. Rotating LED Trio
11. Full Circle
12. Flow-Red
13. Flow-Green
14. Flow-Blue

InWin reserves the right to change the lighting modes.

Troubleshooting

If your AIO pump or fan does not operate properly, please follow the instructions below

1. Please check your system’s power.
2. Please make sure all the connectors are connected properly.
3. For more technical support, please visit the InWin Forum website at https://forum.in-win.com/

Notices and Warranty

Notices

1. Install in accordance with the user manual’s instructions and safety warnings. Incorrect installation may burnout the motherboard and other system components.
2. Keep this product away from areas with high temperatures such as: heat dissipation machines, air conditioners or other machines which may generate high temperatures.
3. Please do not put anything in the impeller.
4. Do not modify the cables and/or connectors included with this product.
5. Please do not put your hands or other objects into the fan blades when the fan is in operation. And please make sure to keep away from children and pets.
6. Please only use this product in a computer case.
7. Please keep this product away from any liquids.
8. Please use only this product’s exclusively supplied cables. Other cables may not be compatible and could cause serious damage to your system and power supply

Warranty

1. For more detailed warranty information, please visit the InWin retail website at www.in-win.com
2. The actual product is subject to change without prior notice.
   IN WIN DEVELOPMENT INC. reserves the right to make any final modifications.
   Copyright © 2021 In Win Development Inc. All Rights Reserved.

References

• Forums - InWin Forums

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>