ALTA LABS S24-POE 24 Port PoE Switch User Guide
- May 15, 2024
- ALTA LABS
Table of Contents
- ALTA LABS S24-POE 24 Port PoE Switch
- Product Information
- Product Usage Instructions
- Before You Begin
- Package Contents
- Hardware Overview
- Ports and LEDs
- Hardware Installation
- Mounting On A Wall
- Set Up Your Device
- S24-POE Specifications
- Compliance
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ALTA LABS S24-POE 24 Port PoE Switch
Product Information
Specifications
- Model: S24-POE
- Ports: 1-16 support 802.3at PoE+ with up to 30W per port
- PoE Budget: 240 Watts
- Input: 100-240V~, 50-60Hz, 3A Max
Product Usage Instructions
Package Contents
The package includes Rack Ears, Rack Ear Screws, Rackstud DUO, Studs, Nuts, SFP+ Port Plugs, and Power Cord. Use the mounting hardware for installation.
Hardware Overview Front
The Alta Labs LED indicates the power status of the unit. The LED color can be changed in the management interface.
Ports and LEDs
Ports 1-16 support PoE+ with up to 30W per port. The Link LED indicates
connection speed, and the PoE LED shows power over Ethernet status.
Ports 17-24 support standard Gigabit Ethernet connections.
Back
- SFP+ Ports support fiber optic and Ethernet transceivers with various connection speeds. LEDs indicate connection and activity status.
- Input: 100-240V~, 50-60Hz, 3A Max. Cooling fan vents are located on the back.
Side
The side panels feature cooling vents for proper ventilation.
Hardware Installation
Rackmount Installation:
- Connect Rack Ears to both sides of the switch using Rack Ear Screws.
- Mount the switch in a rack using the appropriate hardware.
- Connect power using the provided power cord.
Frequently Asked Questions (FAQ)
-
Q: How do I change the LED colors on the unit?
A: LED colors can be changed through the management interface of the device. -
Q: What is the PoE budget for ports 1-16?
A: The PoE budget for ports 1-16 is 240 Watts, supporting up to 30W per port.
Before You Begin
Download the Alta app on your mobile device, and create your free Alta account .
You may also visit manage.alta.inc to manage your Alta devices.
Package Contents
Note : We recommend using the included mounting hardware for product installation.
Installation Requirements
- Ethernet cabling (CAT 5 or above)
- Phillips screwdriver
Hardware Overview
Front
Alta Labs LED
The Alta Labs LED flashes as the unit is powered up. Once fully booted, the LED will remain lit unless turned off in the UI. The LED color can also be changed in the management interface.
Ports and LEDs
- Ports 1-16 support 802.3at PoE+ with up to 30W per port and a PoE budget of 240 Watts. These ports are standard Gigabit Ethernet ports that support 10/100/1000 Mbps connections.
- The Link LED on the left indicates a 10/100 Mbps connection when amber, blue indicates a 1 Gbps connection, and if not illuminated, the connection is down.
- The PoE LED on the right will illuminate amber when a device connected to the port is being powered via Ethernet.
- Ports 17-24 are standard Gigabit Ethernet ports that support 10/100/1000 Mbps connections.
- The Link LED indicates a 10/100 Mbps connection when amber, blue indicates a 1 Gbps connection, and if not illuminated, the connection is down.
- The SFP+ Ports support fiber optic and Ethernet transceivers with 1 Gbps, 2.5 Gbps, 5 Gbps, or 10 Gbps connections.
- The Link LED on the left will illuminate blue when there is a 1 Gbps, 2.5 Gbps, or 5 Gbps connection, it will illuminate white with a 10 Gbps connection.
- The Activity LED on the right flashes blue when there is activity on a 1 Gbps, 2.5 Gbps, or 5 Gbps connection. It will flash white if there is 10 Gbps network activity.
Back
Cooling fan vents are located on the back of the switch. Be sure to use the included power cord to connect power.
Side
The side panels feature cooling vents
Hardware Installation
Rackmount Installation
-
Connect the two Rack Ears to both sides of the switch using the eight Rack Ear Screws.
Note the cooling vents remain exposed with the Rack Ears connected. -
Ensure the arrow on the back of the Rackstud DUO stud is pointing up.
-
Insert the Rackstud DUO stud at the beginning of the RU space just below the thin area.
-
Compress the spring and insert the Rackstud DUO stud from behind the rail.
-
Repeat the same procedure on the opposite rail on the rack.
-
Slide the switch over the Rackstud DUO stud and apply pressure to the front face while installing the Rackstud DUO nuts to the bottom on both sides of the switch.
-
Connect the top Rackstud DUO nuts on both sides of the switch.
Mounting On A Wall
- Connect the two Rack Ears to both sides of the switch using the eight Rack Ear Screws. Be sure to orient the Rack Ears so the openings face the wall.
- Use wall screws and anchors (not included) to secure both sides of the switch to the wall.
Connecting Devices
- Connect devices that need Power over Ethernet to any of the first sixteen ports. The ports are autosensing. Devices that do not require power can be connected to any of the 24 ports.
- Follow the instructions included with your transceivers to connect them to the SFP+ ports. If not using the ports, be sure to place the SFP+ Port Plugs over the ports.
Set Up Your Device
- Follow the instructions in the Alta app or management interface to set up your switch.
S24-POE Specifications
Mechanical
Dimensions| 44 x 254 x 441.5 mm
(1.7 x 10 x 17.4″)
Weight| 3.6 kg (7.9 lbs)
Material Type| SGCC
Material Finish| Powder coat – Matte
Color| Metallic gray
Ports
Interface Ports| (24) 10/100/1000 Mbps
SFP/SFP+| (2) SFP+
Switching Capacity| 88 Gbps
Non-blocking Throughput| 44 Gbps
Forwarding Rate| 65.5 Gbps
PoE Budget/Max| 240 Watts
PoE Supply| 30 Watts per port
Per Port PoE| (16) 802.3at PoE+
Non-PoE Ports| (10)
LEDs
PoE| Orange
Network| Orange: 10/100 Mbps, Blue: 1000 Mbps
SFP
| Blue: Link/Activity (1, 2.5, or 5 Gbps)
White: Link/Activity (10 Gbps)
Hardware
Packet Buffer| 4.1 Mbit
Mac Table Size| 8 K
Energy Efficient Ethernet| Yes
Management| Factory reset button
Bluetooth| Yes, Setup
Power
Max Power Consumption w/o PoE| 53 Watts
Max Power Consumption Full PoE| 295 Watts
Power Supply| Universal AC, 100 – 240VAC 50/60Hz Internal
RJ45 Port Surge Protection| 12kV for ESD – contact, 25kV for ESD – Air
Environmental
Mounting| Rackmount, Wallmount
EMI Rating| EMI Class-A with 3dB margin
Cooling Fan| Yes
Operating Temperature| -5 to 50° C (23 to 122° F)
Operating Humidity| 10 to 90% Noncondensing
Certifications| CE, FCC, IC
Compliance
Federal Communication Commission Interference Statement
This product has been tested and found to comply with the limits for a Class A
digital device under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used by the
instruction manual, may cause harmful interference to radio communications.
Operations of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device is restricted to indoor use.
Non-Modification Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
CAN ICES-003(A) / NMB-003(A)
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
ISED Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator & your body
The transmitter module may not be co-located with any other transmitter or
antenna.
Community Forum
forum.alta.inc
Technical Support
help.alta.inc
All specifications are subject to change without notice. Alta Labs products
are sold with a limited warranty:
alta.inc/warranty
© 2023 Soundvision Technologies. All rights reserved. Alta Labs is a trademark
of Soundvision Technologies.
References
- Il motore di ricerca per risparmiare sui tuoi acquisti | Trovaprezzi.it
- Switch al miglior prezzo | Trovaprezzi.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>