metcalfe 400 Rapimix Stick Blenders Instruction Manual

: June 28, 2024
: metcalfe

Table of Contents

metcalfe 400 Rapimix Stick Blenders
FAQ
Features
Specifications
Your Blender
Installation
Operation
Safety Instructions
Cleaning Instructions
Spare Parts and Service
Metcalfe Warranty
More Products
Contact
Documents / Resources

metcalfe 400 Rapimix Stick Blenders

FAQ

Q: What should I do if my blender is damaged upon receipt?
- A: Keep all packaging materials, do not operate the machine, and contact the supplier immediately for assistance.
Q: How should I clean my stick blender?
- A: Clean the blender with soapy water, avoiding immersion and splashing during cleaning for proper maintenance.

Heavy duty, ergonomic hand-held stick blenders designed to make light work of any mixing and blending. Three different sizes available to suit each application, Rapimix 200, 400 & 500.

Features

Rapimix 400 & 500 feature a powerful 550w motor capable of producing a top speed of 17,000rpm
2 speed and continuous operation selectable
Designed to handle quantities of up to 150ltrs and 200ltrs respectively
4 metres of cable and a wall mounting cradle for ease of storage
A fully waterproof, sealed, stainless steel shaft allows for easy cleaning and perfect food safety
Shaft, foot and blades in stainless steel, motor cover in solid metal casting and handle in high quality synthetics
Capable of 15 minutes continuous use
CE Approved

Specifications

Model

| Product Code| Depth of Insertion (mm)| Processing Quantity (Ltr)| Speeds (rpm)| Motor (Volt)| Frequency (Hz)| Power (kW) / (hp)
---|---|---|---|---|---|---|---
Rapimix 400| 5SB8209| 400| Up to 150| 14,000 / 17,000| 230| 50| 0.55 / 0.75
Rapimix 500| 5SB8210| 500| Up to 200| 14,000 / 17,000| 230| 50| 0.55 / 0.75

Your Blender

Installation

Unpack the blender immediately after receipt. Please inspect it to ensure no damage and all parts have been provided. If the machine is found to be damaged, keep all the packaging material and contact us immediately or contact your source of the equipment. Never attempt to operate the machine with damaged parts. Report any deficiencies to the dealer that supplied the machine.

You should receive with your blender:

1 x Handheld stick blender
1 x Wall mounting cradle/Hanging loop

If any of the above items were not received with your mixer, please refer for contact details and inform us immediately for replacements.

Before first use

Before using the appliance, please read this manual thoroughly. Do not proceed with any installation nor operation if you have any questions or do not understand anything within this manual. Please see contact details for assistance.
Clean the blender shaft, blender foot and blades before use following the cleaning instructions.

Before each use

Check the appliance for damage
Check the cord for damage
Check the blades are properly fixed in position
Check your power source is of the same voltage as indicated on the product

Electrical Connection

Before connecting the mixer to an electrical supply, please read the specifications on the rating plate to ensure that they comply with those of the electrical supply.
The appliance works off 220/240V 50Hz 1 phase supply and comes fitted with a 3-pin 13amp fused plug.
An electrical supply should be available within the reach of the included power cord. DO NOT use extension cords to connect the machine’s power cord to the electrical supply. The low AMP supply could damage the appliance or cause a fire.
All wiring connections must be checked and tight.

Once the electrical connection has been made, the machine is ready for use.

Operation

Insert the power plug
Before turning on the appliance insert the blender in an upright position into the container holding the food to be processed. Never switch on the appliance when outside the container
Choose the speed of rotation, I or II with the rocker switch (I = low speed, II = high speed)
Push start button, device is running
The speed can be changed at will. Should the device turn off during this operation, please press start button again
Never operate continuously for more than 15 minutes at a time. Allow the blender to cool for 5 minutes afterwards
To turn the device off place the rocker switch in centre position 0
In case of problems with the switches, unplug the appliance from the electrical outlet and try again after approximately 1 minute
Ensure that the blades have stopped completely before lifting the appliance out of the food
When blending action is completed unplug appliance from the electrical outlet

Safety Instructions

Save these instructions
Safety instructions must always be followed to prevent damage resulting from the use of this appliance
This appliance is not intended for use by persons (including children) with limited physical, sensory or mental faculties or with a lack of experience and/or knowledge, unless they are continually supervised by a person responsible for their safety or have been carefully instructed in the use of the appliance
Children should always be supervised to ensure that they do not play with the appliance
In case of emergency unplug from outlet immediately
Do not touch power cord when your hands are wet
Do not remove plug from outlet by pulling the cord
Do not clean the cord using water and do not immerse in water or other liquid
Do not damage power cord and keep away from hot or sharp parts etc
Do not operate hand blender if it is damaged
Cable is to be replaced only by an engineer approved by Metcalfe Catering Equipment
Blades are extremely sharp and may cause cut injuries. Wear suitable protection gloves
Do not operate hand blender after the appliance malfunctions or if it is damaged in any manner. Contact our service department who will be able to help you
At the end of its operating life the appliance should be recycled or disposed of properly
NEVER dismantle or try to repair the appliance. Do not insert anything into the openings of the appliance.
Do not use hand blender for other than intended use
To prevent injuries or damage the appliance must only be repaired by an engineer approved by Metcalfe Catering Equipment
Maximum air humidity 90-95%
Environmental temperature 0°C-40°C
Keep in a dry place

Cleaning Instructions

Ensure appliance is unplugged
Observe the safety instructions
Do not hose the appliance with a high-pressure cleaner
Brush blender shaft, blender foot and blades thoroughly with hot water mixed with your usual detergent
Check that food particles are removed completely from any gaps
Rinse thoroughly with warm water afterwards
Never allow water to run onto the motor housing
Leave to dry
Wipe the motor housing clean with a damp cloth or sponge (soapy water). Never immerse in water and avoid splashing during cleaning

Maintenance

Blades and shaft sealing are wearing parts and need to be checked on a regular basis.
It is recommended that the shaft seal (item number SB8210.304) is replaced when worn out or after two years.

Replacement of Seal

Loosen the holding screw and remove blades, pierce old seal with screwdriver and pull out. Clean shaft and boring with a cloth, lubricate new sealing with food safe lubricant and push the protruding seal over the shaft towards the blades. Push the seal with blender blades in original position and tighten the blades in to position at the shaft’s countersink with the holding screw.

Spare Parts and Service

For more information on Metcalfe spare parts, accessories and service support, including breakdown drawings and parts lists please contact us on the details below.
Please always quote the Serial Number of the machine. This can be found on the serial number plate which is located on the appliance.

Metcalfe Sales & Spares Department [email protected]
Metcalfe Service Department [email protected]
Metcalfe Website www.metcalfecatering.com
Metcalfe Telephone Number 01766 830 456

Scan

Additional copies of this instruction manual can be obtained by either visiting our website or contacting the sales department.

Metcalfe Warranty

All Metcalfe products are guaranteed against defects in material and workmanship for a period of one year from date of invoice, except where specifically noted.
The Company’s obligation under this warranty is limited to repairing or replacing, without charge, any part or parts found to be defective under normal use, in accordance with the specified operations manual and capacity ratings.
On all return to factory warranty items, it is the responsibility of the purchaser to return the entire unit to the factory, in a clean condition, properly packed and labelled.
All repairs, alterations or replacement of materials or parts not authorised by Metcalfe will automatically void all warranties in their entirety.
All Metcalfe slicers (except Simple Line) and EC20 chipper are covered by a 2-year warranty (1st year parts and labour, 2nd year parts only) and full after sales service.
All Metcalfe MP mixers are covered by a 3-year warranty (1st years parts and labour, 2nd and 3rd year parts only) and full after sales service.

There is a limited 6-month warranty on the following: