sOlac S9210-A 5-Speed Black Turbo Hand Mixer Instructions

Table of Contents

sOlac S9210-A 5-Speed Black Turbo Hand Mixer Instructions

sOlac S9210-A 5-Speed Black Turbo Hand Mixer
Instructions

sOlac S9210-A 5-Speed Black Turbo Hand Mixer Instructions - Product
Overview sOlac
S9210-A 5-Speed Black Turbo Hand Mixer Instructions - Fig
1

A Eject button
B Speed selector control
C Turbo button
D Motor body
I Beater
J Dough hooks
K Scraper (*)
(*) Only available in the model BXMXA500E.
If the model of your appliance does not have the accessories described above, they can also be bought separately from the Technical Assistance Service.

Do not use the appliance if its accessories are not properly fitted.
Do not use the appliance if the accessories attached to it are defective. Replace them immediately.
Do not use the appliance if the on/off switch does not work.
Do not move the appliance while in use.
This appliance is for household use only, not professional, industrial use.
Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
Keep the appliance in good condition. Check that the moving parts are not misaligned or jammed and make sure there are no broken parts or anomalies that may prevent the appliance from operating correctly.
Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
Do not use the appliance for more than 5 minutes at any one time. Allow to cool for 15 minutes before subsequent use.
Do not work with more than 1 kg flour.

Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void.

BEFORE USE:

Make sure that all products’ packaging has been removed.
Before using the product for the first time, clean the parts that will come into contact with food in the manner described in the cleaning section.

USE (BXMX500E MODEL):

Unroll the cable completely before plugging it in.
Place the accessory (I, J) you want to use to motor body accordingly. (Fig.1).
Connect the appliance to the mains.
Turn the appliance on, by using the speed selector control (B).
From the appliance’s five speeds select the one you need. Always start with slow speeds and increase gradually until you reach the one you wish to use.
Work with the food you want to process.

ELECTRONIC SPEED CONTROL:

The speed of the appliance can be regulated by using the speed selector control (B). This function is very useful, as it makes it possible to adapt the speed of the appliance to the type of work that needs to be done.

ONCE YOU HAVE FINISHED USING THE APPLIANCE (BXMX500E MODEL):

TURBO FUNCTION (C):

This allows you to work using pulses and helps to control the result of the preparation.
Press the turbo button (C). Keep the button pressed down to achieve the desired result.

Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
Do not let water or any other liquid get into the air vents to avoid damage to the inner parts of the appliance.
Never submerge the appliance in water or any other liquid or place it under running water.
It is advisable to clean the appliance regularly and remove any food remains.
The following pieces may be washed in a dishwasher (using a soft cleaning program): · Bowl (*)
Then dry all parts before its assembly and storage.

Take the appliance to an authorised technical support service if product is damaged or other problems arise. Do not attempt to disassemble or repair the appliance yourself as this may be dangerous.