ALTA Roller Skyline 2 on 1 Shades Instruction Manual

June 4, 2024
ALTA

ALTA Roller Skyline 2 on 1 Shades

ALTA-Roller-Skyline-2-on-1 Shades-product

INSTALLATION INSTRUCTIONS

Important: Be sure to get familiar with the Roller Shades – Skyline Fascias installation instructions before continuing. Make sure the mounting surface is level. Brackets must be in line and level for shade to operate properly. Shim brackets if necessary.

Identify the Shade and Define Shades and Bracket Positions

ALTA-Roller-Skyline-2-on-1 Shades-FEATURED-FIG1`

Install the First Shade

ALTA-Roller-Skyline-2-on-1 Shades-FEATURED-FIG2

Install the first shade brackets following the same steps as a regular shade (Please refer to Roller Shades – Skyline Fascias installation instructions). First, assemble the Intermediate Bracket Disc into the intermediate bracket. Rotate the disc 1/4 turn to lock into place. Then, place the spring-loaded pin end into the round hole of the intermediate bracket. Keeping the pin end secure in its bracket, insert the hooks straight into the two slots in the outer bracket.Once the two hooks are through the slots, gently pull downward until the two hooks have locked securely to the bracket.

Install the Second Shade

ALTA-Roller-Skyline-2-on-1 Shades-FEATURED-FIG3

Install the final regular bracket aligned and leveled with the others. Place the spring loaded pin end into the round hole of the intermediate bracket. Keeping the pin end secure in its bracket, insert the hooks on the clutch straight into the two slots in the bracket. Once the two hooks are through the slots, gently pull downward on the side with two hooks until the two hooks have locked securely to the bracket.

Install the Fascia

See more detail on Roller Shades – Skyline Fascias installation instructions.

Remove the Shade (Only If Necessary) — Remove the Fascia

ALTA-Roller-Skyline-2-on-1 Shades-FEATURED-FIG4

First, rotate upward to disengage the fascia. Then, gently pull up the control unit (Clutch, Motor or Spring) until the hooks touch the top part of the bracket slot. Pull the shade towards the spring-loaded pin end until the hooks are completely out of the bracket slots. Finally, remove the spring-loaded pin end from the idler bracket.

Child Safety

WARNING

STRANGULATION HAZARD –
Young children can be strangled by a cord Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible. Rev 7/21 Print 7/21

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals