EGO LB6700 56 Volt Lithium Ion Cordless Blower Instruction Manual
- June 10, 2024
- EGO
Table of Contents
- EGO LB6700 56 Volt Lithium Ion Cordless Blower
- Product Information: 56-Volt Lithium-Ion Cordless Blower
- Safety Guidelines
- Important Safety Instructions
- Product Usage Instructions
- SAFETY GUIDELINES
- INTRODUCTION
- SPECIFICATIONS
- DESCRIPTION
- ASSEMBLY
- OPERATION
- MAINTENANCE
- TROUBLESHOOTING
- WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EGO LB6700 56 Volt Lithium Ion Cordless Blower
Product Information: 56-Volt Lithium-Ion Cordless Blower
The 56-Volt Lithium-Ion Cordless Blower is a household appliance that is designed to help you clear leaves, debris, and other materials from your lawns, driveways, and patios. The blower is available in two models, namely LB6700 and LB6700-FC.
Safety Guidelines
It is essential to follow all safety guidelines when using the cordless blower. The product comes with safety symbols that attract your attention to possible dangers. The safety symbols and explanations deserve your careful attention and understanding. The symbol warnings do not eliminate any danger, and the instructions and warnings they give are no substitutes for proper accident prevention measures.
Important Safety Instructions
Before using the cordless blower, please read and understand the operator’s manual provided with the product. Failure to follow all the instructions listed below may result in electric shock, fire, and/or serious personal injury.
- Always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
- Work in a well-ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Product Usage Instructions
Here are the steps to use the cordless blower:
- Ensure that the battery is fully charged before using the blower. Insert the battery into the battery compartment and lock it in place.
- Hold the blower with both hands, and turn it on by pressing the power button.
- Aim the nozzle of the blower at the leaves, debris, or other materials that you want to clear, and blow them away.
- After using the blower, turn it off by pressing the power button, and remove the battery from the battery compartment.
Please note that the blower is intended for household use only. Do not use it for commercial or industrial purposes. Also, ensure that you follow all safety guidelines and instructions provided with the product to avoid any accidents or injuries.
READ ALL INSTRUCTIONS!
READ & UNDERSTAND OPERATOR’S MANUAL.
WARNING : Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement and other masonry products, and Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
SAFETY GUIDELINES
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols and the explanations with them deserve your
careful attention and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and warnings they give are
no substitutes for proper accident prevention measures.
WARNING : Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,”
“WARNING,” and “CAUTION” before using this tool. Failure to following all
instructions listed below may result in electric shock, fire, and/or serious
personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform the user of important information and/or instructions that could
lead
to equipment or other property damage if they are not followed. Each message
is preceded by the word “NOTICE”, as in the example below:
NOTICE : Equipment and/or property damage may result if these
instructions are not followed.
WARNING : The operation of any power tools can result in foreign objects
being thrown into your eyes, which can result in severe eye damage. Before
beginning power tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always use eye protection which is marked to comply with ANSI
Z87.1.
IMPORTANT SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this
product. Read, understand, and follow all instructions on the machine before
attempting to assemble and operate.
IPX4 | Ingress Protection Degree | Protection from splashing water |
---|---|---|
V | Volt | Voltage |
min | Minutes | Time |
CFM | Cubic Feet Per Minute | Air volume |
MPH | Miles Per Hour | Air velocity |
Direct Current | Type or a characteristic of current |
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT!
WARNING : To ensure safety and reliability, all repairs should be
performed by a qualified service technician.
WARNING : To reduce risk of fire, electric shock, or injury:
-
Know your power blower. Read the instruction manual carefully. Learn the blower’s applications and limitations, as well as the specific potential hazards related to this blower. Following this rule will reduce the risk of electric shock, fire, or serious injury.
-
Do not allow the blower to be used as a toy. Close attention is necessary when
used by or near children. -
Use only as described in this manual. Use only manufacturer’s
recommended attachments. -
If the blower is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service center. -
Do not handle the charger, including charger plug, or charger terminals
with wet hands. -
Do not put any object into any openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
-
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Loose clothes, jewelry, or long hair can be drawn into air vents.
-
Secure long hair above shoulder level to prevent entanglement in moving
parts. -
Use extra care when cleaning on stairs.
-
Do not charge the battery pack outdoors.
-
Use only the charger supplied by the manufacturer to recharge.
-
Do not leave blower unattended when the battery is inserted. Remove the
battery when the blower is not in use and before servicing. -
Do not operate blowers in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Blowers create sparks which may ignite the dust or fumes.
-
Use the battery-operated blower only with specifically designated battery
pack. Use of any other batteries may create a risk of fire. -
Use only with battery packs and chargers listed below.
BATTERY PACK| CHARGER
---|---
BA1400, BA1400-FC, BA2800, BA2800-FC,| CH2100, CH2100-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,| CH3200, CH3200-FC,
BA2240T, BA2240T-FC, BA2242T, BA2242T-FC,| CH5500, CH5500-FC,
BA2800T, BA2800T-FC, BA3360T, BA3360T-FC,| CH2800D, CH2800D-FC,
BA4200T, BA4200T-FC, BA5600T, BA5600T-FC,| CH7000, CH7000-FC
BA6720T, BA6720T-FC| -
Stay alert, watch what you are doing and use common sense when operating a power blower. Do not use the blower while tired, upset, or under the influence of drugs, alcohol, or medication. A moment of inattention while operating blowers may result in serious personal injury.
-
Avoid accidental starting. Be sure that the switch is in the locked or off position before inserting the battery pack. Carrying blowers with your finger on the switch or inserting the battery pack into a blower with the switch on invites accidents.
-
Use safety equipment. Always wear eye protection. Dust mask, non-skid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions. -
Do not use on a ladder, rooftop, tree, or other unstable support. Stable footing on a solid surface enables better control of the blower in unexpected situations.
-
Always take care of your feet, children, or pets around you when removing the battery pack from blower. Serious injury could result if the battery pack falls. NEVER remove the battery pack when in a high position.
-
Do not use the blower if switch does not turn it on or off. A blower that cannot be controlled with the switch is dangerous and must be repaired.
-
Disconnect the battery pack from the blower before making any adjustments, changing accessories, or storing the blower. Such preventive safety easures reduce the risk of starting the blower accidentally.
-
Turn off all controls before removing the battery.
-
DO NOT attempt to clear clogs from the unit without first removing the battery. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the blower’s operation. If damaged, have the blower serviced before using. Many accidents are caused by poorly maintained blowers.
-
Keep the blower and its handle dry, clean and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your blower. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.
-
Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury.
-
Always wear eye protection with side shields marked to comply with ANSI
Z87.1 along with hearing protec tion when operating this equipment. -
Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
-
Protect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury.
-
Battery powered blowers do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery powered blower or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
-
Wear heavy long pants, long sleeves and boots. Avoid loose garments or jewelry that could get caught in moving parts of the machine or its motor.
-
Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear that will protect your feet and improve your footing on slippery surfaces.
-
Do not incinerate the appliance even if it is severely damaged. The batteries
can explode in a fire. -
Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
-
Keep firm footing and balance. Do not overreach. Overreaching can result in
loss of balance. -
Check the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown by or become entangled in the machine.
-
- Do not point the blower tube in the direction of people or pets.
-
Never run the unit without the proper equipment attached. Always ensure
that the blower tube is installed. -
When not in use, the blower should be stored indoors in a dry, secure place
out of the reach of children. -
Keep all bystanders, children, and pets at least 50 ft. away.
-
Blower service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.
-
When servicing a blower, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
-
Never use the blower near fires or hot ashes. Use near fires or ashes can spread fires and result in serious injury and/or property damage.
-
Never use blower to spread chemicals, fertilizers, or any other toxic substances. Spreading these substances could result in serious injury to the operator or bystanders.
-
Never place the blower on any surface, except a hard, clean surface when the engine is running. Gravel, sand, and other debris can be picked up by the air intake and thrown at the operator or bystanders, causing possible serious injuries.
-
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 212 °F (100°C) may cause explosion. -
Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan this tool to someone else, also loan these instructions to them to prevent misuse of the product and possible injury.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Congratulations on your selection of the new 56V Lithium-ion powered blower. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact EGO customer service center 1-855-EGO-5656. This manual contains important information on the safe assembly, operation and maintenance of your product Read it carefully before using the product. Keep this manual handy so you can refer to it at any time.
SPECIFICATIONS
Voltage | 56 V |
---|---|
Maximum air volume at nozzle | 670 CFM |
Maximum air velocity | 160 MPH (without tapered nozzle) |
180 MPH (with tapered nozzle)
Maximum blowing force| 21 Newtons
Approximate run time
(With EGO 56V 4.0Ah Battery)
| 160 min (Low speed)
24 min (High Speed)
13 min (Boost mode)
Recommended Operating Temperature| 5°F – 104°F (-15°C – 40°C)
Recommended Storage Temperature| -4°F – 158°F (-20°C – 70°C)
Weight (without battery pack)| 4.8 lb. (2.2 kg)
PACKING LIST
PART NAME | QUANTITY |
---|---|
Blower | 1 |
Blower tube | 1 |
Tapered nozzle | 1 |
Spread nozzle | 1 |
Operator’s manual | 1 |
RECOMMENDED ACCESSORIES
PART NAME | MODEL NUMBER |
---|---|
Shoulder strap | AP1500 |
Gutter Cleaning Attachment Kit | AGC1000 |
DESCRIPTION
KNOW YOUR BLOWER (Fig. 1)
The safe use of this product requires an understanding of the information on
the tool and in this instruction manual, as well as knowledge of the project
you are attempting. Before use of this product, familiarize yourself with all
operating features and safety rules.
Air-Speed Trigger | Starts/stops the blower and adjusts the air speed |
---|---|
Speed/Lock-On Dial | Starts or stops the blower; locks the blower at any speed |
Boost Button | Amplifies the air velocity to the maximum |
Battery-Release Button | Releases the battery pack from the blower |
Latch | Locks the battery pack when installing it on the blower |
Tube-Release Button | Releases the tube from the blower |
Tapered Nozzle | Further concentrates the air flow and increases the air speed |
Spread Nozzle | Further spreads the air flow and widens the cleaning area |
ASSEMBLY
WARNING : If any parts are damaged or missing, do not operate this
product until the parts are replaced. Use of this product with damaged or
missing parts could result in serious personal injury.
WARNING : Do not attempt to modify this product or create accessories not
recommended for use with this blower. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possible serious
personal injury.
WARNING : Always remove the battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when the product is not in
use.
UNPACKING
-
This product requires assembly.
-
Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
WARNING : Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. -
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
-
Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
-
If any parts are damaged or missing, please return the product to the place of purchase.
ASSEMBLING THE BLOWER TUBE
- Remove the battery.
- Align the groove in the tube with the knob on the blower housing. Push the tube onto the blower housing until the latch snaps into place (Fig. 2 & 3).
- To remove the tube, press and hold the tube-release button to disengage the latch, then pull the tube straight from the blower (Fig. 4).
ATTACHING/REMOVING THE BLOWER NOZZLE
NOTE : Only one nozzle can be attached to the blower. The steps below are
the same for tapered and spread nozzle.
- Remove the battery.
- Align the groove in the nozzle with the knob on the tube. Push the nozzle onto the tube until it snaps into place (Fig. 5 & 6).
- To remove the nozzle, press and hold the nozzle-release button to disengage the latch, then pull the nozzle straight from the blower (Fig. 7).
OPERATION
WARNING : Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is sufficient to
inflict serious injury.
WARNING : Always wear eye protection marked to comply with ANSI Z87.1,
along with hearing protection. Failure to do so could result in objects being
thrown into your eyes and other possibly serious injuries.
WARNING : Do not use any attachments or accessories not recommended by
the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose
parts, such as screws, nuts, bolts, caps,etc. Tighten securely all fasteners
and caps and do not operate this product until all missing or damaged parts
are replaced.
APPLICATION
You may use this product for the purposes listed below:
- Clearing hard surface, such as driveways and walkways
- Keeping decks and driveways free from leaves and pine needles
TO INSTALL/REMOVE BATTERY PACK (Fig. 8) CHARGE BEFORE FIRST USE.
WARNING: Always remove the battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when not in use. Removing
the battery pack will prevent accidental starting that could cause serious
personal injury.
TO INSTALL
- Align the ribs of the battery pack with the mounting slots in the blower’s battery port.
- Press the battery pack into the battery port until it snaps into position.
TO REMOVE
WARNING : Always take care to note the location of your feet, children,
or pets when pressing the battery-release button. Serious injury could result
if the battery pack falls. NEVER remove the battery pack when in a high
location.
- Press the battery-release button; the battery pack will disengage from the latch and the ejection mechanism will assist with removal.
- Remove the battery pack from the blower.
TO START/STOP THE BLOWER (Fig. 9) AIR-SPEED TRIGGER ONLY
- Depress the air-speed trigger to turn on the blower.
- The air speed of the blower is controlled with the variable speed trigger. More pressure on the trigger results in higher blowing speeds; less pressure on the trigger results in lower blowing speeds. Adjust the speed to suit the task at hand.
- Release the air-speed trigger to turn off the blower.
SPEED/LOCK-ON DIAL ONLY
The blower can be locked at any speed with the speed lock-on dial.
- Turn the speed/lock-on dial clockwise to start the blower. The air speed will increase as the dial is rotated clockwise.
- To decrease the air speed, turn the speed/lock-on dial counterclockwise.
- Keep turning the speed/lock-on dial counterclockwise to the off position to stop the blower
NOTICE : If the speed/lock-on dial is not turned back to the off position
before the battery is removed, the blower will not start when a fully charged
battery is installed. This is a protection feature to help prevent accidental
startup. Depress the air-speed trigger to deactivate the protection and start
the blower.
Press the boost button while working to temporarily increase the air speed to
the maximum level. The blower will resume the previous speed when the boost
button is released.
OPERATING THE BLOWER
- To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a pile.
- To reduce sound levels, limit the number of pieces of power equipment used at any one time.
- Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen surfaces if water is available.
- Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.
- Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away.
- After using blowers or other equipment, clean up! Dispose of debris properly.
MAINTENANCE
WARNING : When servicing, use only identical replacement parts. Use of
any other parts may create a hazard or cause product damage. To ensure safety
and reliability, all repairs should be performed by a qualified service
technician.
WARNING : To avoid serious personal injury, always remove the battery
pack from the product when cleaning or performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING : Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., come in contact with plastic parts.
Chemicals can damage, weaken or destroy plastic which may result in serious
personal injury.
STORAGE
- Clean all foreign material from the air intakes of the blower.
- Store the blower indoors in a place that is inaccessible to children. Keep it away from corrosive agents, such as garden chemicals and de-icing salts.
TROUBLESHOOTING
PROBLEM | CAUSE | SOLUTION |
---|---|---|
¡ The battery pack is not attached to the blower. | ¡ Attach the battery |
pack to the blower.
| ¡ No electrical contact between the blower and battery.| ¡ Remove battery,
check contacts and reinstall the battery pack.
| ¡ The battery pack is depleted.| ¡ Charge the battery pack.
Blower doesn’t work.| ¡ The battery pack or blower is too hot.| ¡ Cool the
battery pack and blower until their temperature drops below 152°F (67°C).
| ¡ The speed/lock-on dial was not turned
back to the off position before the battery was removed.
| ¡ Depress the air-speed trigger to deactivate the protection and start the blower.
The air velocity decreases obviously.
| ¡ Excessive wearing of motor fan.
¡ The air intake is blocked by debris.
| ¡ Contact EGO service center for repair.
¡ Remove the battery pack, clear the debris.
WARRANTY
EGO WARRANTY POLICY
5-year limited warranty on EGO POWER+ outdoor power equipment and portable
power for personal, household use.
3-year limited warranty on EGO POWER+ System battery packs and chargers for
personal, household use. An additional 2-year extended warranty applies for
the 10.0Ah/12.0Ah battery whether sold separately (Model# BA5600T/BA6720T) or
included with any tool, if it is registered within 90 days of purchase. 5-year
limited warranty on CHV1600 charger, designed for use with Zero Turn Riding
Mower for personal, household use.
2 year/1year limited warranty on EGO outdoor power equipment, portable power,
battery packs, and chargers for professional and commercial use.
The detailed warranty periods by products can be found online at
http://egopowerplus.com/pages/warranty-policy. Please contact EGO Customer
Service Toll-Free at 1-855-EGO-5656 any time you have questions or warranty
claims.
LIMITED SERVICE WARRANTY
EGO products are warranted against defects in material or workmanship from the date of original retail purchase for the applicable warranty period. Defective product will receive free repair.
-
This warranty applies only to the original purchaser from an authorized EGO retailer and may not be transferred. Authorized EGO retailers are identified online at http://egopowerplus.com/pages/warranty-policy.
-
The warranty period for reconditioned or factory-certified products used for residential purposes is 1 year, and for industrial, professional or commercial purposes is 90 days.
-
The warranty period for routine maintenance parts, such as, but not limited
to, blades, trimmer heads, chain bars, saw chains, belts, scraper bars, blower nozzles, and all other EGO accessories is 90 days for residential purpose, 30 days for industrial, professional or commercial purpose. These parts are covered for 90/30 days from manufacture defects in normal working conditions. -
This warranty is void if the product has been used for rental purpose.
-
This warranty does not cover the damage resulting from modification, alteration or unauthorized repair.
-
This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defect resulting from misuse, abuse (including overloading of the product beyond capacity and immersion in water or other liquid), accidents, neglect or lack of proper installation, and improper maintenance or storage.
-
This warranty does not cover normal deterioration of the exterior finish, including but not limited to scratches, dents, paint chips, or to any corrosion or discoloring by heat, abrasive and chemical cleaners.
HOW TO OBTAIN SERVICE
For warranty service, please contact EGO customer service toll-free at
1-855-EGO-5656. When requesting warranty service, you must present the
original dated sales receipt. An authorized service center will be selected to
repair the product according to the stated warranty terms. When bringing your
product to the authorized service center, there may be a small deposit that
will be required when dropping off your machine. This deposit is refundable
when the repair service is deemed to be covered under warranty.
ADDITIONAL LIMITATIONS
To the extent permitted by applicable law, all implied warranties, including
warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, are
disclaimed. Any implied warranties, including warranties of merchantability or
fitness for a particular purpose, that cannot be disclaimed under state law
are limited to the applicable warranty period defined at the beginning of this
article.
Chervon North America is not responsible for direct, indirect, incidental or
consequential damages.
Some states do not allow limitations on how long an implied warranty lasts
and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
For customer service contact us toll-free at: 1-855-EGO-5656 or
EGOPOWERPLUS.COM EGO Customer Service, 769 Seward
Ave NW Suite 102, Grand Rapids, MI 49504.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>