EGO CH7000 56V Charger Owner’s Manual

EGO CH7000 56V Charger

Product Information

The 56-Volt Charger, Model Number CH7000/CH7000-FC, is a battery charger designed with safety, performance, and dependability as top priorities. It has many features that make its use pleasant and enjoyable. The device complies with Part 15 of the FCC Rules and has been tested and found to comply with the limits. The charger has safety symbols to attract attention to possible dangers and comes with safety instructions that must be read and understood before use.

Product Usage Instructions

1. Read and understand the Operator’s Manual before using the product. Failure to do so may result in electric shock, fire, and/or serious personal injury.
2. Always wear safety goggles or safety glasses with side shields when operating the product. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Eye protection must be marked to comply with ANSI Z87.1.
3. Do not expose the charger to rain or use it in damp locations.
4. Connect the charger to a power source before connecting the battery.
5. Make sure the battery is compatible with the charger before connecting it.
6. Insert the battery into the charger and make sure it is securely in place.
7. Connect the charger to the battery and make sure the connection is secure.
8. The charger will automatically detect the battery and begin charging. The LED light on the charger will indicate the charging status.
9. When the battery is fully charged, disconnect it from the charger and unplug the charger from the power source.

WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference.

READ ALL INSTRUCTIONS!

READ & UNDERSTAND OPERATOR’S MANUAL
This battery charger has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference.
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.

WARNING: Be sure to read and understand all safety instructions in this Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,” and “CAUTION” before using this tool. Failure to following all instructions listed below may result in electric shock, fire, and/or serious personal injury.

WARNING: The operation of any power tools can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
The term “power tool” in all of warnings listed below refers to corded power tools or battery operated (cordless) power tools.
WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service technician.

WORK AREA SAFETY

• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive environments, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks, which may ignite the dust or fumes.

ELECTRICAL SAFETY

• Avoid body contact with grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

• Power tool plugs must match the outlet. Never modify the plug in any way.

• Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts.
  Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

• Use charge the EGO lithium-ion battery packs list below:

SERVICE

• Have your charger serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the charger is maintained.
• When servicing a charger, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.

SAFETY RULES FOR CHARGER

• CAUTION: To reduce the risk of electric shock or damage to the charger and battery, charge only those lithium-ion rechargeable batteries specifically designated on your charger’s label. Other types of batteries may burst, causing personal injury or damage.

• Before using the battery charger, read all instructions and cautionary markings in this manual and on the battery charger, the battery and the product using the battery to prevent misuse of the products and possible injury or damage.

• Do not use the charger outdoors or expose it to wet or damp conditions.
  Water entering the charger will increase the risk of electric shock.

• Do not handle charger, including the charger plug and charger terminals with wet hands.

• Use of an attachment not recommended or sold by the battery-charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

• Do not abuse the cord or charger. Never use the cord to carry the charger. Do not pull the charger cord to disconnect the plug from a receptacle. Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately.

• Make sure that the cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, or otherwise be subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury and damage to the cord, which could then result in electric shock.

• Keep the cord and charger from heat to prevent damage to housing or internal parts.

• Do not allow gasoline, oils, petroleum-based products, etc. to come in contact with plastic parts. These materials contain chemicals that can damage, weaken, or destroy plastic.

• Do not operate the charger with a damaged cord or plug, which could cause shorting and electric shock. If damaged, have the charger repaired or replaced by an authorized service technician at an EGO Service Center.

• Do not operate the charger if it has received a sharp blow, been dropped, or has otherwise been damaged in any way. Take it to an authorized service technician for an electrical check to determine if the charger is in good working order.

• Do not disassemble the charger. Take it to an authorized service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

• Unplug the charger from the electrical outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.

• Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It will also help prevent damage to the charger during a power surge.

• Risk of electric shock. Do not touch the uninsulated portion of output connector or uninsulated battery terminal.

• This manual contains important safety and operating instructions for 56V Charger CH7000/CH7000-FC.

• To reduce the risk of injury, close supervision is necessary when an appliance is used near children.

• For a portable appliance – To reduce the risk of electrical shock, do not put charger in water or other liquid. Do not place or store appliance where or can fall or be pulled into a tub or sink.

• Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you lend this tool to someone else, also lend these instructions to them to prevent misuse of the product and possible injury.
  SAVE THESE INSTRUCTIONS!

INTRODUCTION

Congratulations on your selection of a new generation of EGO POWER+ 56V charger. It has been designed, engineered and manufactured to give you the best possible dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO customer service center 1-855-EGO-5656.
This manual contains important information on to the safe assembly, operation and maintainance of your 56V charger. Read it carefully before using the charger. Keep this manual handy so you can refer to it at any time.

SERIAL NUMBER__
DATE OF PURCHASE ____
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE.

SPECIFICATIONS

pack
Charge Time| Approximately

30 minutes for BA1400/BA1400-FC battery pack; 30 minutes for BA2800/BA2800-FC battery pack; 45 minutes for BA4200/BA4200-FC battery pack; 30 minutes for BA1400T/BA1400T-FC battery pack; 25 minutes for BA2242T/BA2242T-FC battery pack; 30 minutes for BA2800T/BA2800T-FC battery pack; 35 minutes for BA3360T /BA3360T-FC battery pack; 45 minutes for BA4200T/BA4200T-FC battery pack; 50 minutes for BA4480T/BA4480T-FC battery pack; 60 minutes for BA5600T/BA5600T-FC battery pack; 75 minutes for BA6720T/BA6720T-FC battery pack

Recommended Ambient Temperature for Charging| 41°F-104°F (5°C-40°C)
Charger Weight| 4.4 lb. (2.0 kg)

DESCRIPTION

KNOW YOUR CHARGER (Fig. 1a & 1b) The safe use of this product requires an understanding of the information on the tool and in this operator’s manual, as well as knowledge of the project you are attempting. Before using this product, familiarize yourself with all operating features and safety rules.

LED INDICATORS: Indicates the charging status. There is 4 Green LED and 1 Red/Green biocolor LED, the latter is the one in the middle of the LEDs (Fig. 2).

BATTERY-MOUNTING SLOT: Guides the battery pack when it is installed on the charger. WALL MOUNTING HOLE: For convenient storage on the wall.

OPERATION

HOW TO CHARGE THE BATTERY PACK

WARNING: Do not use the charger outdoors or expose it to wet or damp conditions. Water entering the charger will increase the risk of electric shock.
NOTICE: Lithium-Ion battery packs are shipped partially charged. Before using it the first time, fully charge the battery pack.

1. Connect the charger to the power supply (120V~, 60Hz). The 5 charging indication LEDs will briefly shine green and turn out, indicating that the charger is working correctly.
2. Align the raised ribs of the battery pack with the battery-mounting slots in the charger; slide the battery pack down onto the charger (Fig. 3).
3. The charger will communicate with the battery pack to evaluate the condition of the battery pack.
4. When the battery pack is charging, the 5 LEDs on the charger will shine green in sequence, in clockwise direction, to indicate the charge level; please refer to Fig. 4. For BA1400, BA1400-FC, BA2800, BA2800-FC, BA4200 and BA4200-FC battery packs, the power indicator on the battery will flash in sequence: red, orange and green; for BA1400T, BA1400T-FC, BA2242T, BA2242T-FC, BA2800T, BA2800T-FC, BA3360T, BA3360T-FC, BA4200T, BA4200T-FC, BA4480T, BA4480T-FC, BA5600T, BA5600T-FC, BA6720T and BA6720T-FC battery packs, the last LED indicator on the battery will keep flashing green while the former LEDs shine solid green. The fan in the charger continuously works to cool the battery pack; when the battery pack is fully charged, the fan will stop working.

5. When the battery pack is fully charged, the charging indication LEDs on the charger will stop alternating and shine green continuously. The power indicator on the battery pack will go out. Wait until the cooling fan stops, remove the battery pack from the charger and disconnect the charger from the power supply.
6. The battery pack will fully charge if left on the charger, but it will not overcharge. If the battery pack remains on the charger for one month or more, it will perform self-maintenance and drop to 30% charge capacity. If this occurs, reinstall the battery pack on the charger to recharge it fully.

NOTICE:
◾ A significantly reduced run time after fully charging the battery pack indicates that the batteries are near the end of their usable life and must be replaced.
◾ The charger may warm during charging. This is part of the normal operation of the charger. Charge in a well-ventilated area.

LED FUNCTIONS OF CHARGER

CHARGING A HOT OR COLD BATTERY PACK

If the battery pack is out of the normal temperature range, LED 3# will shine RED. When the battery pack cools down to approximately 135°F (57°C) or warms to more than 37°F (3°C), the charger will automatically begin charging and the corresponding LEDs on the charger will sequence normally.

DEFECTIVE BATTERY PACK OR CHARGER
If the charger detects a problem, LED 3# will begin flashing RED or all the LEDs will turn off.

1. If registering as defective, remove and reinsert the battery pack in the charger.
   If the LEDs still read “defective” a second time, try charging a different battery pack.

2. If a different battery pack charges normally, dispose of the defective battery pack (refer to the instructions in the battery pack manual).

3. If a different battery pack also indicates “defective”, unplug the charger and wait until the flashing LED 3# goes out, then reconnect the charger plug to the power supply. If no charger LEDs shine green briefly simultaneously for self-inspection at the plugging moment or LED 3# on charger still display defective, the charger may be defective.

WALL-MOUNT HOLES

The charger has hanging holes for convenient storage (see Fig.1b). Install screws in the wall 3 inches (76mm) apart. Use screws sufficiently strong to hold the combined weight of the charger and battery pack.

MAINTENANCE

WARNING: To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance. WARNING: When servicing, use only identical EGO replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician at an EGO

Service Center.

WARNING: It is not recommended to use compressed dry air as cleaning method of the charger. If cleaning with compressed air is the only method to apply, always wear safety goggles or safety glasses with side shields. If the operation is dusty, also wear a dust mask.

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING : Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. to come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

TROUBLESHOOTING

pack or charger is defective or bad connection between the battery pack and charger.| 1. Try to remove and reinsert the battery pack in the charger.

2. Try charging a different battery pack.

 |  | 3. Unplug the charger and wait until LED #3 turns off, then reconnect

the plug to the power supply.

Charger doesn’t work and LED #3 shines red.| Battery pack is too hot or too cold.| Allow the battery pack to reach normal temperature. Charging will begin when battery pack returns to 37°F(3°C) -135°F(57°C).

EGO LIMITED WARRANTY

WARRANTY POLICY TERMS AND DURATION
Chervon North America, Inc. (“Chervon North America”) provides the following Limited Warranty for EGO products to the original purchaser of EGO products. The detailed warranty period for each EGO product can be found online at
http://egopowerplus.com/warranty-policy.
Please contact EGO Customer Service Toll-Free at 1-855-EGO-5656 any time you have questions or warranty claims or would like a hard copy of the warranty.

LIMITED SERVICE WARRANTY
EGO products are warranted against defects in material or workmanship from the date of original retail purchase for the applicable warranty period. For any properly and timely submitted warranty claim, if Chervon North America determines a product to be defective during the warranty period, the product will receive free repair or replacement as determined by Chervon North America.

HOW TO OBTAIN SERVICE
For warranty service, within the applicable warranty period, please contact EGO customer service toll-free at 1-855-EGO-5656. When requesting warranty service, you must present the original dated sales receipt. An authorized service center will be selected to evaluate and repair the product if defective according to the stated warranty terms. When bringing your product to the authorized service center, there may be a small deposit that will be required when dropping off your tool. This deposit is refundable when the repair service is deemed to be covered under warranty.

ADDITIONAL LIMITATIONS & EXCLUSIONS

This limited warranty applies only to the original purchaser from an authorized EGO retailer and is not transferable. EGO products shall not be considered defective, and this warranty will not apply, where the claimed defect is attributable to any cause other than the above-defined defects. This warranty shall be void if the product has been used for rental purposes. This warranty shall not apply to damage caused by accident, abuse, misuse, alteration, modification, unauthorized repair, liquid contact, fire, earthquake or other external cause; operating the product outside EGO’s instructions, specifications or guidelines; or failure to properly service of maintain the product. This warranty also does not apply to cosmetic damage, including but not limited to scratches or dents; defects caused by normal wear and tear or otherwise due to the normal aging of the product.

THIS EXPRESS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE OR USE, WHICH ARE DISCLAIMED.

Any implied warranties, including warranties of merchantability or fitness for a particular purpose, that cannot be disclaimed under state law are limited to the applicable warranty period defined at the beginning of this article. The sole and exclusive remedy in connection with the purchase, installation, use, and/or performance of the EGO products is repair or replacement of the product as determined by Chervon North America. Chervon North America’s maximum liability shall not in any case exceed the purchase price paid for the product.

CHERVON NORTH AMERICA SHALL NOT BE LIABLE TO THE USER OR TO ANYONE ELSE FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, EXEMPLARY, INDIRECT, OR PUNITIVE DAMAGES ARISING FROM USE OF THE PRODUCTS, INCLUDING BUT NOT LIMITED TO PERSONAL INJURY, DEATH, PROPERTY DAMAGE, LOST PROFITS, OR OTHER ECONOMIC INJURY.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, the exclusion or limitation of incidental or consequential damages, or the limitations on time to bring certain actions, so such limitations contained herein do not apply to individual consumers in those states. This warranty is subject to and shall be interpreted according to Michigan law without regard to principles of conflicts of laws. No legal action shall be brought against Chervon North America unless filed within one (1) year after the basis for such legal action becomes known, or with the exercise of reasonable diligence should have become known. Any action not timely filed shall be deemed waived.

For customer service contact us toll-free at: 1-855-EGO-5656 or
EGOPOWERPLUS.COM.
EGO Customer Service
769 Seward Ave. NW, Suite 102
Grand Rapids, Michigan 49504.

References

• The #1 Rated Brand in Cordless Outdoor Power Equipment | EGO
• Warranty Policy | EGO POWER+

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>