Qingdao Ronco Mechanic Electronic Technology RONCO-RE302 2 Channel Emitter User Manual

June 6, 2024
Qingdao Ronco Mechanic Electronic Technology

Qingdao Ronco Mechanic Electronic Technology RONCO-RE302 2 Channel Emitter
User Manual

Please read this manual carefully before using the product, and keep it properly

Product description

Package containing: Emitterl,Bracket1 , Operation manual1, Screw2 ,Nut2

Technical parameters

Product name: 2 Channel emitter
Product model: RE302
Product size: 1303715mm
Input voltage: 3.0 V
Transmission distance: Exterior conditions>150m
Interior conditions>35m
Operating frequency: 433.92MHz
Working temperature: -10%-55%
Working humidity: 10%-90%RH, no condensing

Features

  1. RE302The indicator light is the chosen channel.
  2. RE302: All indicator lights on means group control channel.
  3. Group control channel: Take RE302 as an example, group control can control all the paired motors in the 1,2 channel.

Operation step

Keystroke Time Description
Long press 2 seconds feature settings
Once Pairing
Long press 2 seconds Switch direction/ setting  confirmation
Long press 2 seconds Speed regulation +
Long press 2 seconds Speed regulation

Warnings and precautions

  1. For fear of shortening the life of the emitter, please avoid dampness and bumps in use. If the emitter range shortens or the emitter becomes insensitive, please replace the old battery with a battery of the same model and recycle the replaced battery.
  2. Please do not use batteries of different types for fear of explosion.

The warranty type

Type Content Warranty time
The whole machine Remote control 2 years

FCC Compliance Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals