EGO CHU6000 6 Port Mobile Charging Case User Manual

: May 15, 2024
: EGO

Table of Contents

EGO CHU6000 6 Port Mobile Charging Case
Product Information
Product Overview
CHARGING BATTERY PACK INSTRUCTIONS
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EGO CHU6000 6 Port Mobile Charging Case

EGO-CHU6000-6-Port-Mobile-Charging-Case-product

Product Information

Specifications

Model Number: CHU6000
Compatibility: Exclusively compatible with EGO POWER+ CHARGER CHV1600/CHV1600-FC or with CH5500/CH5500-FC/CH7000/CH7000-FC and ACA1000

FAQ

Q: What should I do if water enters the charging case?
- A: If water enters the case, disconnect it from power immediately and do not use until it is completely dry to avoid electric shock.
Q: Can I use other types of batteries in this charging case?
- A: No, only use lithium-ion rechargeable batteries specified in the manual to prevent personal injury or damage.

This 6-Port mobile charging case is exclusively compatible with EGO POWER+ CHARGER CHV1600/CHV1600-FC or with CH5500/CH5500-FC/CH7000/CH7000-FC and ACA1000.

WARNING

Do not expose this 6-Port mobile charging case to wet or damp conditions. Water entering the charging case will increase the risk of electric shock.
Do not expose the 6-Port mobile charging case to fire or excessive temperature. Exposure to fire or temperature above 212 °F (100 °C) while charging may cause explosion.
Refer to the charger manual for detailed instructions. Read and understand all its safety warnings and instructions. Failure to follow them may result in electric shock, fire, and/or serious injury.
Do not use the storage compartment to keep metal objects like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

Product Overview

EGO-CHU6000-6-Port-Mobile-Charging-Case-fig-1

CHARGING BATTERY PACK INSTRUCTIONS

CHARGING BATTERY PACK(S)

CAUTION: To reduce the risk of electric shock or damage to the charging case and battery packs, charge only those lithium-ion rechargeable batteries specified in the CHV1600/CHV1600-FC manual. Other types of batteries may burst, causing personal injury or damage.

Open the lid of the charging case (Fig. 2a and 2b).
- Pull down the tab.
- Open the latch.
- Repeat the above steps with remaining four latches.
Charge the battery pack(s).
IMPORTANT: Follow the steps below in exact order!
- Insert battery pack(s) in battery compartment(s) as shown in Fig. 3. Make sure that each battery pack is securely locked in its compartment and the battery release button popped up.
- Open the charging port cover and insert the charger or ACA1000 connector into the charging port.
- Plug the power cord plug into a standard power outlet to start the charging process.
  CAUTION: To reduce the risk of damage to the charger cord, keep the lid open whenever the charger connector is connected to the charging case.
Whenever any battery pack is fully charged, press the battery release button to release the battery pack, then pull the battery pack out.
When finished charging, unplug the power cord from power outlet, disconnect the charger connector.
Close the lid and lock all five latches.

STORING BATTERY PACK(S)

The charging case can also be used to store battery pack(s). Simply insert the battery pack(s) into vacant battery compartment(s). Make sure that each battery pack is securely locked in its compartment and the battery release button popped up.
To prevent damage to battery packs, store the charging case with battery packs inside only at room temperature.

TRANSPORTING