VIVOTEK ND9442P 16-CH Embedded PoE NVR Instruction Manual
- June 10, 2024
- Vivotek
Table of Contents
VIVOTEK ND9442P 16-CH Embedded PoE
Warning Before Installation
- Power off the Network Video Recorder if you detect abnormal smell or smoke coming from it.
- Do not place the Network Video Recorder around the heat sources, such as television or oven.
- Do not drop the Network Camera.
- PLEASE NOTE : VIVOTEK does not provide warranty or technical support for third party application software that users additionally install and run on the NVR.
- Keep the Network Video Recorder away from water. If the Video Recorder is wet, power off immediately.
- Do not place the Network Video Recorder in high humidity environments.
- Do not attempt to remove or uninstall the software on the mounted flash memory.
Product Information:
- Product Name: ND9442P / ND9542P NVR
- Part Number: 625075500G
- Manufacturer: VIVOTEK
Package Contents
Product Usage Instructions:
- Warning: Power off the Network Video Recorder immediately if you detect an abnormal smell or smoke coming from it. Do not use it until the issue is resolved.
- Do not place the Network Video Recorder around heat sources such as television or oven.
- Do not drop the Network Camera and keep it away from water. If the Video Recorder is wet, power it off immediately.
- Avoid placing the Network Video Recorder in high humidity environments.
- Do not attempt to remove or uninstall the software on the mounted flash memory.
- VIVOTEK does not provide warranty or technical support for third party application software that users additionally install and run on the NVR.
- Package Contents: Please check the package contents before using the product.
Hardware Installation
For Taiwan RoHS related information, refer to the link below and select
Traditional Chinese to download the document.
https://www.vivotek.com/nd9442P
https://www.vivotek.com/nd9542P
Please contact authorized distributors for warranty and RMA service.
Visit https://www.vivotek.com/support/warranty-rma ”
Please do not connect the NVR’s PoE ports to non-PD* devices (such as an Ethernet switch LAN port). The Ethernet control circuits may not be compatible.
- PD = A Powered Device designed to receive power source from a PoE connection such as network cameras.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>