MICHELIN MEMS4 LTE Evolution Module Transceiver Instructions
- June 10, 2024
- MICHELIN
Table of Contents
MICHELIN MEMS4 LTE Evolution Module Transceiver Instructions
DISPOSAL
The MEMS EVOLUTION 4, LTE/GPS MODULE must not be disposed of in landfill.
At the end of its life, the MEMS EVOLUTION 4, LTE/GPS MODULE must be removed from the vehicle and deposited in a container dedicated to the recycling of electronic equipment. If users do not have access to the appropriate recycling facility, your local Michelin MEMS representative is able to provide a container dedicated to the purpose of collecting MEMS equipment.
PRODUCT INFORMATION
For correct operation, the coupling torque of all SMA connectors is 0.34 – 0.57Nm. Failure to tighten to this range can result in loss of performance and/or damage to the connector during use.
CONTACT DETAILS – Technical Support
For more information or assistance, please contact the Michelin MEMS
representative for your country.
Brasil, Chile & Perú : +55 (21) 36 21 4646
USA, Canada & México : +1 864 458 5000
Australia : +61 3 86 71 1003
South Africa : +27 115 790 300
Russia : +7 495 258 09 26
China : +86 21 22855000
Europe : +33 4 73 32 20 00
Features, specifications are subject to change without notification. Document version 3.0
PRODUCT NAME
MEMS4 LTE/GPS MODULE TRANSCEIVER – Part Number CAI 906401 IMEI TAC Number: 35
925908
PRODUCT DESCRIPTION
The MEMS 4 LTE/GPS MODULE TRANSCEIVER is mounted in a MEMS EVOLUTION 4
TRANSCEIVER. It transmits to the MEMS SERVER, via an externally antenna, the
pressure and temperature of tyres fitted with a MEMS SENSOR together with the
location of the vehicle in which the transceiver is mounted. It can also
receive from the server, updates of the transceiver configuration and
software.
FCC / IC CERTIFICATION
Model : RV8-01
FCC ID : FI5-RV801
Contains FCC ID: N7NEM75 / Contains IC: 2417C-EM75
Note : This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC Statement
Please take attention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Michelin may void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
PRODUCT SPECIFICATION
Frequency band support
| Band | LTE | WCDMA | Frequency (Tx | Frequency (Rx) |
|---|---|---|---|---|
| B1 | o | o | 1920–1980 MHz | 2110–2170 MHz |
| B2 | o | o | 1850–1910 MHz | 1930–1990 MHz |
| B3 | o | 1710–1785 MHz | 1805–1880 MHz | |
| B4 | o | o | 1710–1755 MHz | 2110–2155 MHz |
| B5 | o | o | 824–849 MHz | 869–894 MHz |
| B6 | o | o | 830–840 MHz | 875–885 MHz |
| B7 | o | 2500–2570 MHz | 2620–2690 MHz | |
| B8 | o | o | 880–915 MHz | 925–960 MH |
| B9 | o | o | 1749.9–1784.9 MHz | 1844.9–1879.9 MHz |
| B12 | o | 699–716 MHz | 729–746 MH | |
| B13 | o | 777–787 MHz | 746–756 MH | |
| B18 | o | 815–830 MHz | 860–875 MHz | |
| B19 | o | o | 830–845 MHz | 875–890 MHz |
| B20 | o | 832–862 MHz | 791–821 MHz | |
| B26 | o | 814–849 MHz | 859–894 MHz | |
| B28 | o | 703–748 MHz | 758–803 MH | |
| B29 | o | n/a | 717–728 MH | |
| B30 | o | disabled | 2350–2360 MHz | |
| B32 | o | n/a | 1452–1496 MHz | |
| B42 | o | 2496–2690 MHz (TDD) | ||
| B43 | o | 3400–3600 MHz (TDD) | ||
| B46 | o | 3600–3800 MHz (TDD) | ||
| B48 | o | n/a | 5150–5925 MHz (TDD) | |
| B66 | o | 3550–3700 MHz (TDD |
Storage Conditions
- Storage temperature: -40 to +80°C, -40°F to +176°F
Operating Conditions
- Operating temperature: -20°C to +60°C, -4°F to +140°F
Physical Characteristics
- Dimensions: L=180mm. W= 65mm. D=20mm (including connectors)
- Weight: approximately 500g
- Aluminium case, anodized
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>