FEELWORLD 6 Inch Touch Screen Camera Monitor User Manual

6 Inch Touch Screen Camera Monitor
User Manual

Foreword

Thank you for purchasing our 6-inch Full HD touch screen monitor. Please read this manual carefully before using the unit. Have a great experience!
CAUTION

1. Please avoid the heavy impact and drop onto the ground when move the product.
2. The screen of this product is made of glass. Keep away from injury if the screen is broken.
3. Keep the product away from the heat source, and avoid the prolonged exposures to the sun as the LCD screen will be damaged.
4. Please do NOT use chemical solutions to clean this product. Please wipe the monitor with a clean soft cloth to maintain the brightness of the surface.
5. No adjustable components are in the monitor. Please do not take apart or repair the unit by yourself, to avoid the damage of the product.

Key Features

• 6-inch 1920×1080 full HD IPS screen
• Touch screen menu operation, improve shooting efficiency
• New menu interface, more intuitive and intelligent
• HDMI 2.0 input supports up to 4K@60Hz, 3G-SDI (optional)
• HDMI supports LUT loop-out
• Support HDR monitoring, what you see is what you get
• Support 3D LUT Log to REC.709 and user 3D LUT upload
• With Waveform, Histogram, False Color, Monochrome etc. functions, can help you accurately exposure and focus every shot.
• Stereo Earphone output
• DC 8.4V power out to power your DSLR camera or mirrorless camera
• Built-in cooler (low, medium, high) to adjust
• Flexible power supply (DC IN 12V, F970 battery plate for F970 batteries)

Product Description

1.1 Front + Rear

1.2 Button / Interface Instruction
Top

1| Power/Touch Function Button| Long press to turn on/off power;
short press to turn on/off the screen touch function
---|---|---
2| 1/4 Screw Thread| Use for mount on the bracket, etc.
3| Micro SD Card Slot| Use for upgrade/ LUT files import
4| MENU Wheel Button| See details 2.2 MENU Wheel Menu Operation in 2. Menu Operation Instruction.

Bottom

Left

Right

1.3 Power Supply Way

1. The rear cover of the monitor is equipped with F970 battery plate, which is applicable to F970 series of batteries.
   Sony F970 battery plate for battery of Sony DV:
   Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 series
   Remark: It is recommended to use standard original F970 batteries. Different specifications of the battery have different capability. The working time for the  monitor will be different.
   Higher capability (working time) will be longer. Please take off the battery from the monitor if you don’t use the monitor in a long time.

2. DC IN 12V: DC power input, polarity as the input power, Barrel (5.5mm outer, 2.1mm inner) at the bottom of the monitor, DC 7~14V Input.

3. DC OUT 8.4V: DC power output interface, polarity as the output power Barrel output for powering your camera with a separately available DC coupler via adaptor (NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic). More adapters coming soon.

1.4 Mount Points
There are (3) ¼-20 thread points (top, bottom, right) can be easily connected to the hot shoe mount, tripod fixed installation.

Menu Operation Instruction

After the monitor is properly connected to the power supply, the button display(red indicating). Long press button to turn on the monitor and turns green indicating.
After startup, short press button to select to turn the screen touch function on or off.

2.1 Touch Screen Menu Operation (turn on the screen touch function)

1. Double-click on the screen to open the main menu (show on the left side of the screen) and click on the corresponding menu to display the secondary menu. You  can enter the corresponding function option and click directly to select or set. Click the touch screen to exit the menu.
2. When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu, and click on the corresponding menu box to open or set the  corresponding function.
3. When the menu is not displayed, on the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; on the right side of  the screen (1/2 split screen), you can directly adjust the volume.

Figure:

2.2 MENU Wheel Menu Operation

1. When the menu is not displayed, directly rotate the wheel to backlight or volume adjustment. The wheel option can be set to backlight or volume in the menu System.
2. Short press the MENU wheel to open the main menu (on the left side of the screen). Rotate the wheel to select the secondary function menu. After selecting it,  press the wheel, then rotate the wheel to select or set the option function.
3. Long press the MENU wheel to open the shortcut menu (below the screen), rotate the wheel to select the shortcut menu option, press the wheel to directly turn  on/off the function, if you press the parameter selection, repeat the above operation. Long press the wheel to exit.

Function Instruction

3.1 Menu Function
The main menu including Assist, Marker, Image, User, System 5 parts.

Assist

Analysis| Off, On
After turning on, waveform, histogram and audio meters will be
shown.
---|---
Waveform| Off, On
Type: RGB, YUV
This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The waveform feature also checks the evenness of the lighting when lighting a chromakey or background.
Vector scope| Off, On
Shows how saturated the image is and where the pixels in the image land on the color spectrum.
Histogram| Off, On
Type: Y, RGB, Y+RGB
Focus Assist| Off, On
Focus Color: Red, Green, Blue, White
Focus Level: 1~100
Audio Meters| Off, On
Check Field| Off, On
Type: red, green, blue, white
Zebra| Off, On
Level: 1~100
False Color| Off, On
Type: Spectrum, ARRI

Marker

Type: 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1:1, 1.91:1,
4:5, 9:16: 1.85:1, 2.35:1
Line Color: Red, Green, Blue, White, Black, Yellow
Crosshair| Off, On
Cinema Guides| Off, On
Type: 16:9, 16:10, 4:3, 1.85:1, 2.35:1, 2.41:1, 1.91:1, 5:4,
1:1.91
Line Color: Red, Green, Blue, White, Black, Yellow
After the Marker Mat is turned on, the Marker Mat Alpha
0%~75% can be adjusted.

Image

Scan Mode| Off, On
Mode: Under Scan, Over Scan
---|---
Aspect Ratio| Off, On
Type: 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, user Under the “user”, you can customize the Video  Width (100% ~ 200%), Video Height (100% ~ 200%)
Anamorphic| Off, On
Type: 1.25x, 1.33x, 1.5x, 1.8x, 2.0x, 2.0x mag
Mirror| Off, On
Auto (the image will automatically adjust), 180 Degrees, Flip H, FlipV .
Zoom| Off, On
Zoom Times: 1.0x～5.0x
Freeze| Off, On
Pixel to Pixel| Off, On

User

HDR| Off, On
HLG2020、HLG709、HLG P3
---|---
LUT| Off, On
After copying the 3D LUT file to the micro SD card and inserting it into the micro SD card  slot, click Import or rotate the wheel to import the 3D LUT file. (up to 50) Note: the chip  should be faced up when inserting the SD card,

System

Wheel| Backlight, Volume
After selecting the wheel option, you can click Backlight or Voice , or rotate the wheel to select  one of the shortcut key to set it to the rotary wheel adjustment (when the menu is not displayed).
---|---
Input| HDMI, SDI (with SDI interface version)
Output| HDMI: 1080P, Follow In
Fan| Low, Medium, High
Language| English,
OSD| OSD Time: always, 15s, 30s, 45s, 60s
OSD Alpha: 0%~75%
Volume| Mute: Off, On
Volume: 0~100
Reset| Off, On
After confirmed, all the parameters will restore factory
Upgrade| Current Version: show the current version of device Update
After copying the update file to the SD card and inserting it into the micro SD card slot, you can  click Update or rotate the wheel to update.
Note: the chip should be faced up when inserting the SD
card, and press it after inserting to ensure that the SD card
is fully inserted.

3.2 Shortcut Menu
The user can call up the shortcut menu by swipe up from the bottom of the screen, and click on the corresponding menu box to open or set the corresponding function.
Click the hide icon to close detailed parameters, and click icon to display detailed parameters.

3.3 Status column
The top of the interface is the status column, the user can check the input and output resolution, battery level, etc.

INPUT: display the resolution of INPUT resolution, e.g. INPUT HDMI 1920x1080x60
OUTPUT: display the resolution of OUTPUT resolution, e.g.: OUTPUT HDMI 1920x1080x60
LUT: LUT status, when use LUT it will display the LUT name such as SLOG2; without LUT, display LUT monitoring e.g. LUT Monitor
: Recording Key, plug USB  flash disk via USB2.0 port (supports FAT32 format), the top of screen will show the red recording key, just click it to start record, and will display the recording time,  when the recording is about 1 minute, the information displayed on the top screen will be hidden automatically. You can click anywhere on the screen to view the  recording time or click the recording key again to end the record.
Volume: display the voice0~100
Lock: display the status of touch function Lock indicates the touch function locked, Unlock indicates support touch.
Battery Level: battery level status, when use battery power supply, according to four full bars to display the battery level. full-bar: 80%~100% three-bar: 50%~80%；two-bar：30%~50%；one-bar: 10%~30%；empty: less than 10%，the color of battery icon change to red.
Note: The status bar is put away by default and is only displayed when the main menu or shortcut menu is turning on

Support Formats

SDI Support
Format
(SDI version)| 480i | 576i | 1080i@59.94/60
720p@23.98/24/25/29.97/30/50/59.94/60
1080p@23.98/24/25/29.97/30/50/59.94/60
1080psf@23.8/24/25/29.7/30
---|---
HDMI 2.0 Support
Format| SMPTE
720p@50/60 | 1080i@50/60 |1080p@24/30/50/60
720p (60/59.94/50/30/29.97/25/24/23.98)
VESA
1024×768@60 | 1280×720@60 | 1280×768@60 | 1280×800@60 |
1280×1024@60 |1360×768@60 |
1366×768@60 | 1440×900@60 | 1600×1200@60 |
1680×1050@60 | 1920×1080@60 | 1920×1200@60 |
3840×2160@60 | 4096×2160@60
HDMI 1.4 Support
Format| SMPTE
720p@50/60 | 1080p@24/25/30/50/60
VESA
1024×768@60 | 1280×720@50/60 | 1280×768@60 |
1280×1024@60 |1360×768@60 | 1920×1080@24/25/30/50/60

Technical Parameters

Trouble Shooting

6.1 Only black and white or monochrome picture:

1. please check saturation, brightness & contrast adjustment.
2. Please check “Monochrome” is in black, white or monochrome image or other condition.

6.2 NO Image after put on the power

1. Check if signal cable connecting is in good condition.
2. Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully  charged.

6.3 Earphone No sound

1. Check if Volume control do not open, press the volume button, and try to increase the volume.

■ If there are still other problems, please contact with our related technologists.
★ As we are improving product features and product performance, so if there is any change on the specification without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>