PROLED L515132G 1-Kanal DALI PWM Dimmer User Manual
- June 11, 2024
- PROLED
Table of Contents
DALI (4-in-1 Input) PWM DIMMER 1-Channel
L515132G
User Manual
L515132G 1-Kanal DALI PWM Dimmer
Preface
Thanks for choosing PROLED DALI (4-in-1 Input) PWM DIMMER 1-Channel. Before
installation and use, we strongly recommend you to read this manual carefully.
If the device has been damaged during transport, please report this to your
supplier immediately. Please don’t take any action without contacting your
supplier first
Limited Warrenty
In case of quality problems we provide free repair or replacement within
one year from the day of purchase, if this product has been used properly in
accordance with the user’s manual, except in following cases:
- Any defects caused by wrong operation.
- Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips.
- Any damages due to transportation, vibration etc. after purchase.
- Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
- Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals.
- Product has been updated
Safety Warnings
- Please don’t install this dimmer during thunderstorms, intense magnetic or high-voltage electrical fields. To reduce the risk of component damage and fire caused by a short circuit, make sure, that all connections are correct.
- Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
- Check voltage and power requierements of the dimmer as well as the polarity of the power supply.
- Never connect any cables while power is switched on and always assure correct connections to avoid short circuit before switching on.
- Never attempt any repairs yourself; otherwise the manufacturer’s warranty will be void.
- For update information please consult your supplier.
Product description
PROLED DALI (4-in-1 Input) PWM DIMMER 1-Channel allows controlling of Luminaires, Panels, Flex Strip etc., by one of 4 different Signals. As input signals you can choose between DALI, 0/110 V, Phase cut or PUSH-DIM.
Technical Data
| Modell | PROLED DALI (4-in-1 Input) PWM DIMMER 4-Channel |
|---|---|
| Input Voltage | 12 – 24 VDC |
| Output | 1x 20A max. |
| Power consumption | < 1 W |
| Ambient temperature | -10°C – 45°C |
| Dimensions | 170 mm x 54 mm x 28 mm (LxWxH) |
| Net-weight | 120 g |
Specifications
- 4 different signal inputs possible
- 2 parallel terminal blocks to allow smaller cable size. Per input max. 10 A allowed.
- Compatibility with standard phase cut dimmer.
Usage
DIP Switch for signal input choose
Please select first the dim signal input with the DIP switsches according to
existing signal, before you start to connect wires. Different signals can not
be connected and used at same time. Only one of the possible signals can be
chosen, connected and used at same time.
DALI Addresse setted by DALI Master
When DALI dimming signal is choosen, the DALI address will be assigned
automatically by DALI Master. Please refer to the manual of the DALI-Master.
Safety & Warnings
- DO NOT choose Signal input, when dimmer is connected to power.
- DO NOT install with connected power.
- DO NOT install in moisture surroundings.
Connection diagram
- DALI Bus
- AC Push-Dim
- Analog 0/1-10V
- Phase-Cut-Dimmer
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
03.23. Technical amendments reserved
www.proled.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>