Brook B08H1SYGWV Wingman Converter User Guide
- June 11, 2024
- Brook
Table of Contents
B08H1SYGWV Wingman Converter
User Guide
B08H1SYGWV Wingman Converter
• Each Wingman FGC can only connect to a single Fighting Stick device. Wingman FGC supports most of the accessories that are compatible with original factory specifications. To expand the number of supported accessories, firmware will be updated irregularly.
LED Display
| Lighting | Status |
|---|
Blue LED
Permanently on| The converter and the Wired Fighting Stick are currently
connected.
Blue LED
Slow blinking
(Once every two seconds)| Wired Fighting Stick is not connected.
Red LED
Blinking| Turbo-Remap button is being pressed
Red LED
Permanently on| Entering Turbo-Remap Settings
Connecting to the Device
-
Connects to Console
Insert Wingman FGC into the PS5 console USB port. Slow blinking of the Blue LED indicates that the connection to the console is successful. -
Connects to Wired Controller
Connect the Wired Fighting Stick to Wingman FGC through the USB port.
Corresponding Buttons
| X1/X1E2 | X360 | PS4/PS5 | PS3 | Switch | PC |
|---|
D-Pad (U/D/L/R)
Lx / Ly
Rx / Ry
A| A| ╳| ╳| B| A
B| B| ○| ○| A| B
X| X| □| □| Y| X
Y| Y| △| △| X| Y
LB| LB| L1| L1| L| LB
RB| RB| R1| R1| R| RB
LT| LT| L2| L2| ZL| LT
RT| RT| R2| R2| ZR| RT
LSB| LSB| L3| L3| L3| LSB
RSB| RSB| R3| R3| R3| RSB
MENU| START| OPTIONS| START| +| START
View＋MENU
/MENU| BACK＋
START| SHARE
/Create| SELECT| –| BACK
Xe Key| Xe Key| PS Key| PS Key| Home| Xe Key
VIEW/
SHARE| BACK| TP Key| －| Capture| －
Turbo Function Settings
The following instructions are based on the PS4 controller.
Turbo Function Settings
Buttons that can be set as Turbo function buttons include: ╳, ○, □, △, L1, R1,
L2, R2, L3, R3 (hereinafter referred to as FK)
Step 1. Enter setting mode: Press SHARE＋PS Key, the RED LED of the
Wingman FGC will be permanently on.
Step 2. Choosing a FK button: (e.g. Setting ╳ as turbo function) Hold
SHARE, then press ╳
Step 3. Completing Setting Mode: Release all buttons, then press OPTIONS
to save settings.
Step 4. Exit setting mode: Press PS Key, the BLUE LED of the Wingman FGC
will be permanently on.
Cancelling Turbo Function
Step 1. Enter setting mode: Press SHARE＋PS Key, the RED LED of the
Wingman FGC will be permanently on.
Step 2. Erasing all Turbo function buttons Press SHARE＋OPTIONS
Step 3. Exit setting mode: Press PS Key, the BLUE LED of the Wingman FGC
will be permanently on.
Turbo Frequency Setting
The following instructions are based on the PS4 controller.
Step 1. Enter the setup mode
Press SHARE＋PS Key, the RED LED of the Wingman FGC will be permanently on.
Step 2. Turbo Frequency Setting
The Up button increases frequency while the Down button decreases it.
To increase frequency: press both SHARE and the Up buttons, and the indicator
will flash faster.
To decrease frequency: press both SHARE and Down buttons, then the indicator
will flash slower.
Step 3. Save
Press OPTIONS to save your settings.
Step 4. Exit
Press the PS Key button to leave Turbo setup mode. The RED LED indicator will
then turned o.
Button Remap Settings
The following instructions are based on the PS4 controller.
Button Remap Settings
Buttons that can be Remap include: ╳, ○, □, △, L1, R1, L2, R2, L3, R3
(hereinafter referred to as FK)
Step 1. Enter setting mode: Press OPTIONS＋PS Key, the RED LED of the
Wingman FGC will be permanently on.
Step 2. Choosing a FK button: (e.g. Setting □ as ╳+○ ) Press □
Step 3. Choosing button to be set: Hold SHARE, then press ╳+○ .
Step 4. Completing setting mode: Release all buttons, then press OPTIONS
to save settings.
Step 5. Exit setting mode: Press PS Key, the BLUE LED of the Wingman FGC
will be permanently on.
Cancelling Button Remap Settings
Step 1. Enter setting mode: Press OPTIONS＋PS Key, the RED LED of the
Wingman FGC will be permanently on.
Step 2. Erasing all settings for Button Remap Settings. Press
SHARE＋OPTIONS.
Step 3. Exit setting mode: Press PS Key, the BLUE LED of the Wingman FGC
will be permanently on.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Ambient Operating Temperature ………………….0 ℃ to +50 ℃
ISED Statement:
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
FCC ID: 2ADKM005A
IC: 29174-ZPP005A
P/N: Wingman FGC
M/N: ZPP005A
For the latest user guide and more information, visit our website: www.brookaccessory.com
202304V1