logitech MX Keys Mini for Mac Bluetooth Keyboard User Guide
- June 11, 2024
- Logitech
Table of Contents
MX Keys Mini for Mac Bluetooth Keyboard
User Guide
MX Keys Mini for Mac Bluetooth Keyboard
Getting Started – MX Keys Mini for Mac
QUICK SETUP
Go to the interactive setup
guide for quick interactive
setup instructions.
If you want more in-depth information, go to the ‘Detailed Setup’ below.
DETAILED SETUP
-
Make sure the keyboard is turned on.
The LED on the Easy-Switch button should rapidly blink. If not, perform a long press for three seconds. -
Connect your device via Bluetooth:
o Open the Bluetooth settings on your computer to complete the pairing.
o Click here for more details on how to do this on your computer. If you experience issues with Bluetooth, click here for Bluetooth troubleshooting.
Important
FileVault is an encryption system available on some Mac computers. When enabled, it might prevent Bluetooth® devices from connecting with your computer if you have not yet logged in. If you have FileVault enabled, you can either use your MacBook keyboard and trackpad to log in or you can use a USB keyboard or mouse to log in. -
Install Logitech Options Software.
Download Logitech Options to use all the possibilities this keyboard has to offer. To download and learn more, go to logitech.com/options.
PAIR TO A SECOND COMPUTER WITH EASY-SWITCH
Your keyboard can be paired with up to three different computers using the
Easy-Switch button to change the channel.
- Select the channel you want using the Easy-Switch button — press and hold the same button for three seconds. This will put the keyboard in discoverable mode so that it can be seen by your computer. The LED will start blinking quickly.
- Open the Bluetooth settings on your computer to complete the pairing. You can read more details here.
- Once paired, a short press on the Easy-Switch button lets you switch channels.
INSTALL SOFTWARE
Download Logitech Options to use all the possibilities this keyboard has to
offer. To download and learn more, go to
logitech.com/options.
The software is compatible with Windows and Mac.
LEARN MORE ABOUT YOUR PRODUCT
New F-row keys
- – Dictation
- – Emoji
- – Mute/unmute microphone
Dictation The dictation key
lets you convert speech-to-text in active text fields (notes, email, and so
on).
Simply press and start speaking.
Emoji You can quickly access emojis by pressing the emoji key.
Mute/unmute microphone You can mute and unmute your microphone with a
simple press during video conferencing calls.
To enable the key, download Logi Options here.
Product Overview
- – Mac layout
- – Easy-Switch keys
- – Dictation key
- – Emoji key
- – Mute/unmute microphone
- – ON/OFF switch
- – Battery status LED and ambient light sensor
Your keyboard is compatible with macOS 10.15 or later, iOS 13.4, and iPadOS 14 or later.
Battery Notification
Your keyboard has an LED near the On/Off switch to let you know the battery
status. The LED will be green from 100% to 11% and turn red from 10% and
below. Turn off the backlighting to continue typing for more than 500 hours
when the battery is low.To
charge, plug in the USB-C cable at the top right corner of your keyboard. You
can continue typing while it is charging.
Smart backlighting
Your keyboard has an embedded ambient light sensor that reads and adapts
the level of backlighting accordingly.
Room brightness | Backlight level |
---|---|
Low light – under 100 lux | L4 – 50% |
High light – over 100 lux | L0 – no backlight* |
***** Backlight is turned OFF.
There are eight total backlight levels. You can change the backlight level at
any time with two exceptions: the backlight cannot be turned ON when:
- the room brightness is high, over 100 lux
- the keyboard battery is low
Software notifications
Install Logitech Options software to get the most out of your keyboard. You
can find more information here.
-
Backlight level notificationsYou can see the backlight level changes in real-time.
-
Backlighting disabled
There are two factors that will disable backlighting: When your keyboard has only 10% of battery left, this message will appear when you try to enable backlighting. If you want the backlight back, plug in your keyboard to charge it. When the environment around you is too bright, your keyboard will automatically disable backlighting to avoid using it when not needed. This will also allow you to use it longer with backlight in low light conditions. You will see this notification when you try to turn backlighting ON. -
Low battery When your keyboard reaches 10% of battery left, backlighting turns OFF and you get a battery notification on the screen.
-
F-Keys switch
When you press Fn + Esc you can swap between the Media keys and F-Keys.
We’ve added a notification so you know when you’ve swapped the keys.
NOTE: By default, the keyboard has direct access to Media Keys.
Logitech Flow
You can work on multiple computers with your MX Keys Mini. With a Flow-enabled
Logitech mouse, such as MX Anywhere 3, you can also work and type on multiple
computers with the same mouse and keyboard using Logitech Flow technology.
You can use the mouse cursor to move from one computer to the next. MX Keys
Mini keyboard will follow the mouse and switch computers at the same time. You
can even copy and paste between computers. You will need to install Logitech
Options software on both computers and then follow these
instructions.
Click here for a list of our Flow-enabled mice.
References
- Download Logitech Options Customization Software
- Download Logitech Options Customization Software
- Bluetooth troubleshooting for Logitech Bluetooth Mice, Keyboards and Presentation remotes – Logitech Support + Download
- Set up and enable Logitech Flow for use with a mouse – Logitech Support + Download
- Connect your Logitech Bluetooth device – Logitech Support + Download
- Logitech Flow Multi-Device Control and Easy File Sharing
- Download Logitech Options Customization Software
- Logitech Support + Download
- MX Setup Guide | Logitech Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>