Tribit BTH80 CallElite 81 Wireless Headset User Manual

Tribit BTH80 CallElite 81 Wireless Headset User Manual

Package Contents

Product Illustration

1. Volume –
2. Volume +
3. MFB button
4. LED Indicator
5. USB-C Charging Port (headset jack)
6. USB-C Charging Port (charging base)
7. MIC Bar
8. Mute button
9. USB Dongle

Specifications

Power On/Off

1. Power on: Press and hold the MFB button for 2s until there is a prompt voice “Power on”. The green LED indicator will glow steadily for 2s.
2. Power off: Press and hold the MFB button for 4s until there is a prompt voice “Power off”. The red LED indicator will flash for ls and then turn off.

Bluetooth Connection

1. Press and hold the MFB button for 4s until the green LED indicator flashes, and then the headset will automatically enter Bluetooth pairing mode. The red / green indicator lights will flash alternately.
2. Open the Bluetooth menu on your phone and refresh the Bluetooth device list, then select the audio device named “Tribit CallElite 81” to begin pairing.

Mute Button

1. In the conversation state, short press the mute button and there is a prompt voice “Mute on”. Then the conversation will be muted.
2. In the mute state, short press the mute button and there is a prompt voice “Mute off”. Then the conversation will be restored to normal.

Buttons Functionality

on state simultaneously to clear the pairing list, and then the headset will automatically go back to pairing mode.

Voice Prompt

Charging Instruction

1. Charge the headset directly
   Connect one end of the USB-C charging cable to a 5V power adapter (not included), and the other end to the headset. The red LED indicator will glow sturdily during charging while it will change steady green after the headset is fully charged.
   

2. Charge the headset by the charging base Connect one end of the USB-C charging cable to a 5V power adapter (not included), and the other end to the charging base. The red LED indicator will glow sturdily during charging while it will change steady green after the headset is fully charged.

USB Dongle

1. For the first use, please insert the dongle into the USB interface of your computer to power it on It will auto enter pairing state (blue indicator flashing).
2. Power on the wireless headset, and try to get the headset as close as possible to the dongle, and then it will auto connect to the dongle successfully in about 30s. If it has ever been paired, the headset will auto connect to the dongle each time when it is powered on.
3. After that, you can listen to music or chat with others if your computer is playing music or on an online conversation.

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/Tv technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>