MiBOXER FUT035S-036S Outdoor Waterproof LED Single Color Dimmer Instruction Manual
- June 4, 2024
- MiBOXER
Table of Contents
- Features
- Linking Code / Unlinking Code Instructions
- Signal transmitting
- The mode of “Do Not Disturb”
- Scan QR code to watch video instruc�on
- PWM high frequency / low frequency switching
- Attention
- Compatible with these remote controls (Purchased separately)
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MiBOXER FUT035S-036S Outdoor Waterproof LED Single Color Dimmer
Features
Product adopt the widely used 2.4GHz wireless technology with the features of low power consumpon, long signal transming and strong an-interference, etc. Product has auto-transming funcon. Widely used on the controlling of hotel lighng and home lighng.
Dual White LED Light
| Color temperature adjustable
---|---
| Dim brightness
| 2.4G RF wireless transmission technology
| Signal transmitting
| Remote control Control distance 30m
| Smartphone app control (2.4GHz gateway is needed)
| Support third party voice control (2.4GHz gateway is needed)
Single Color LED Light
| Dim brightness
---|---
| 2.4G RF wireless transmission technology
| Signal transmitting
| Remote control Control distance 30m
| Smartphone app control (2.4GHz gateway is needed)
| Support third party voice control (2.4GHz gateway is needed)
Linking Code / Unlinking Code Instructions
Linking Code Instructions
-
Switch off light, after 10 seconds then switch on again.
-
Short press ” I ” button 3 times within 3 secondswhen light on.
-
Lights blink 3 times slowly means linking is done successfully.
| Linking failed if light is not blinking slowly, Please follow above steps
again.
(Note: Light that have linked can’t link again)
---|---
Unlinking Code Instructions
-
Switch off light, after 10 seconds then switch on again.
-
Short press ” I ” button 5 times within 3 seconds when light on.
-
Lights blink 10 times quickly means unlinking is done successfully
| Unlinking failed if light is not blinking quickly, Please follow above steps
again.
(Note: Light haven’t linked that don’t need to unlink)
---|---
Signal transmitting
One light can transmit the signals from the remote control to another light
within 30m, as long as there is a light within 30m, the remote control
distance can be limitless.
The mode of “Do Not Disturb”
It can be activated or turned off via remote control
Turn on “Do not disturb” (wide using in the area which have power failure
frequently to save energy)
Press “OFF” button three times within three seconds and press “ON” button
three times, Activated successfully once led light flashes four times quickly
Attention: Do not disturb mode is activated
-
When the light is OFF status (For example: Use app or remote to turn off light)
The light is OFF status once you turn off power and turn on again. (User must turn off and turn on power twice times to activate light or use APP / remote to activate light) -
When the light is ON status
The light is ON status once you turn off and turn on power one time.
Turn off “Do not disturb”
Press “ON” button three times within three seconds and press “OFF” button three times, closed successfully once led light flashes four times slowly
Attention: The light will be always “ON” status if you turn on and turn off power once user closed “Do not Disturb” mode.
Scan QR code to watch video instruc�on
Smartphone app control (WL-Box1 video)
|
---|---
PWM high frequency / low frequency switching
Switch to high frequency (8KHz): on the condition of turning on the light
- Short press the “OFF” button of the remote control once;
- Short press the “ON” button 5 times within 3 seconds, the white light blink 2 times quickly, indicating successfully
Switch to low frequency (500Hz): on the condition of turning off the light
- Short press the “OFF” button of the remote control once;
- Short press the “ON” button 5 times within 3 seconds, the white light blink 2 times quickly, indicating successfully
Attention
- Please check whether the voltage of the power supply is in accordance with the light, and please check the connection of both the cathode and anode, otherwise the light will be broken.
- Please don’t connect wires with power on. Please turn on again only when it is in right connecyion and no short circuit.
- Non-professional user cannot dismantle the lighying fixtures directly.
- Please do not use the light in the place with widely range metal area or strong electromagneytic wave nearby, otherwise, the remote distance will be seriously affected.
Compatible with these remote controls (Purchased separately)
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>