PNI ML160 Wireless Antenna Instruction Manual
- June 11, 2024
- PNI
Table of Contents
PNI ML160 Wireless Antenna
Product Information
The PNI ML160 is a CB antenna that is 145cm long and made of stainless steel. The package does not include a magnetic mount or cable. The antenna has a frequency range of 26.9-27.5 MHz, with an S.W.R. of 1.2:1 and an impedance of 50 Ohms. It can handle a maximum power of 600W continuously and has 90 channels.
Product Usage Instructions
To use the PNI ML160 CB antenna, you need to have a magnetic mount and cable. These are not included in the package and need to be purchased separately. Once you have the required equipment, follow these steps to use the antenna:
- Mount the magnetic base on a flat metal surface.
- Attach the cable to the magnetic base.
- Connect the other end of the cable to your CB radio.
- Turn on your CB radio and select the desired channel.
- To ensure maximum performance, it is recommended to perform a tuning procedure called calibration. This should be done by authorized personnel.
Description
PNI ML160 is a CB antenna 145 cm long. The magnetic mount or the cable is not included.
Installation
- You must connect the antenna to a magnetic base (not included).
- Connect the antenna to a CB radio and test the S.W.R. in an open area.
- In some cases, you might need to raise or shorten the whip of the antenna to obtain an optimal S.W.R. value. For maximum performance, this procedure (called tuning), is recommended to be performed by authorized personnel.
Technical specifications
| Frequency | 26 – 28 MHz |
|---|---|
| S.W.R. | ≤ 1.2:1 |
| Impedance | 50 Ohm |
| Max. power | 600 W continuously |
| Height | 145 cm |
| Channels | 90 |
| Whip material | Stainless steel |
Read User Manual Online (PDF format)
Loading......