RISCO WiComm Pro Wireless Device RF Transmissions User Guide
- June 11, 2024
- RISCO
Table of Contents
WiComm Pro Wireless Device RF Transmissions
User Guide
WiComm Pro Wireless Device RF Transmissions
| Wireless Device | Transmission procedure |
|---|---|
| 2-Way LCD Keypad | Press simultaneously for at least 2 seconds |
| 2-Way Panda Keypad | Press simultaneously for at least 2 seconds. |
| 2-Way Slim Keypad | Press simultaneously for at least 2 seconds. |
PIR Detectors:
•PIR
•PIR camera
•PIR-pet
•PIR-pet camera| Press the tamper switch for 3 seconds.
Curtain Detector| After inserting battery, close the bracket and wait 3
seconds.
1-Way magnetic Contact Detectors| Press the tamper switch for 3 seconds.
2-Way Magnetic Contacts Detectors| Press the tamper switch for 3 seconds.
NOTE: After programming parameters for this device and exiting
Programming mode, press the Tamper switch for 3 seconds, and then wait 1
minute for the main panel to download the parameters from the detector.
2-Way Remote Control| Press simultaneously for at least 2 seconds
1-Way Keyfob| Click for at least 2 seconds
Wireless 2-Way
Smoke Alarm & Heat Detector| Press the tamper switch for 3 seconds.
WL 2-Way Indoor Siren| Press the tamper switch for 3 seconds.
Siren| Press the reset switch on the siren. After a squawk sounds, within 10
seconds press tamper switch for at least 3 seconds.
2-Button Panic Keyfob| Press both buttons for at least 7 seconds
Wrist Band Panic Transmitter| Press the button for at least 7 seconds.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>