RISCO Lights Plus Flagship Hybrid Alarm Panel User Guide

June 4, 2024
RISCO

**RISCO Lights Plus Flagship Hybrid Alarm Panel User Guide

**

Full (“Away”) Arming

Full (“Away”) Arming

| Quick mode:

v High Security mode: Code

| | Quick mode:

High security mode:

code or use Proximity tag

|

Quick mode:
High Security mode: Code

| | to apply to all partitions, or slide a specific partition to the right under
| quick mode:

High security mode: Code

| | Press
| Full Arm all: Security | | Press
| Quick mode:

high Security mode:   code

|

Partial (“Stay”) Arming

Partial (“Stay”) Arming

| Quick mode:

High Security mode:  Code

| | Quick mode:

High security mode:

code or use Proximity

tag

| Quick mode:

High Security mode: Code

| |

to apply to all partitions, or slide a specific partition to the left under

|

Quick mode:

High security mode: Code Ø

| | Press
| Partial Arm all: Security  press| |

Press or large rounded button (installer-defined)

| Quick mode:

High Security mode:  code

|

Partition & Group Arming

Partition & Group Arming

| Full partition arming:

Code  “Security” menu  “Partitions” tab  select All or specific partition number/s

v Partial partition arming:

Code  “Security” menu  “Partitions” tab  select All or specific partition number/s

Group Arming: “Groups” tab  press group letter

| Full partition arming:

Code  select All or specific partition number/s

Partial partition arming:

Code  select All or specific partition number/s  ****

Group Arming: Press group letter

| Full partition arming:

Code select All or specific partition number/s

Partial partition arming:

Code  select All or specific partition number/s

Group Arming: Press group letter

| Note: Supports up to 3 partitions . Does not support Group arming.

Full partition arming:

·   Quick mode: Partition number

·   High Security mode: Partition number code or use Proximity tag

Partial partition arming:

·   Quick mode: Partition number

·  High Security mode: Partition number code or use Proximity tag

System Disarming

System Disarming

| Code “Security” menu | |

 code or use Proximity tag

|

Code

| |

to disarm all partitions, or slide a specific partition to the center under enter code

| Code | | Press|
| Disarm all: Security ****code

press Disarm

| | Disarm all: Press
| Quick mode:

High security  mode:   code

|

Partition & Group Disarming

Partition & Group Disarming

| Code  “Security” menu  “Partitions” tab  select the Partitions to Disarm
| Partition disarming: Code select

All or specific partition number(s)

Group disarming:

| | Partition disarming:

Partition number

code

| Partition disarming: Code select All or specific partition number(s)

Group disarming:

Duress Disarming

Duress Disarming

| Duress code

Note: Panel is silent (no alarm siren)

| | duress code

Note: Panel is silent

(no alarm siren)

| Duress code

Note: Panel is silent (no alarm siren)

|

Bypassing & Un-bypassing Zones

Bypassing & Un-bypassing Zones

| Code  “Security” menu  “Detectors” tab  select a detector (zone)

slide switch to the right to bypass

| code   scroll to Activities menu  Bypas Zones scroll to select a bypass option     .
|   code scroll to Activities menu   Bypass  Zones

scroll to select a bypass option

Viewing System Troubles

Viewing System Troubles

| Code  from the Top Bar, press  to view troubles
|

code scroll to View menu  Trouble  scroll to view troubles

| code  scroll to View menu  Trouble   scroll to view troubles

Viewing Last Alarm / Event Log

Viewing Last Alarm / Event Log

| Code Ø “History” menu Ø press “All” to view all events, or search an event

Note: You can filter the search according to specific types of events: All / Alarms / Troubles / Smart Home / Media Events

|

code scroll to Event Log   scroll to view events

| code  scroll to Event Log   scroll to view events

Viewing System Status

Viewing System Status

|

for 2 seconds

| | Quick mode:

for 2 seconds

v High Security mo de: for 2 seconds Ø

code or use

Proximity tag

| Press|  |
| Press|  |
| v Quick mode:  for 2 seconds

v High Security mode:  for 2 seconds  code

|

Activating Output

Activating Output

| Code

“Security” menu

“Utiltiy Output” tab  select relevant Utility Output button,

| | code scroll to Activities menu,  scroll to Utility Output menu  enter Utility Output number

Note: Must be installer-defined

| | v Quick mode: Press button (1—3) for 2 seconds

v High security mode : Press button (1—3) for 2 seconds Ø code or use Proximity tag.

Note: Must be installer-defined

|  | code scroll to Activities menu, scroll to Utility Output menu enter Utility Output number .

Note: Must be installer-defined

| Quick mode: Press button (1—3) for 2 seconds

High security mode: Press button (1—3) for 2 seconds enter code.

Note: Must be installer-defined

Activating a Panic Alarm

Activating a Panic Alarm

| Press the Emergency button     (located at the top of the Lock Screen or at the end of the main menu) press  and together for 2 seconds.
|  | Press  and together for at least 2 seconds|
|  | Press   and   together for at least 2 seconds| Press 1 and 2
together for 2
seconds
|  | Press and        simultaneously|
|  | Press         and          together for 2 seconds.|

Activating a Fire Alarm

Activating a Fire Alarm

| Press the Emergency button     (located at the top of the Lock Screen or at the end of the main menu) press  and  together for

2 seconds.

|

Press       and       together for at least 2 seconds.

| |

Press 3 + 4  together for 2

seconds

| Press  and  together for at least 2 seconds|  |

Activating an Auxiliary Emergency Alarm

Activating an Auxiliary Emergency Alarm

| Press the Emergency button     (located at the top of the Lock Screen or at the end of the main menu) press  and  together for 2

seconds.

|

Press       and      together for at least 2 seconds.

| |

Press 5 + 6  together for 2

seconds

|

Press    7     and    8     together for at least 2 seconds.

|  |

SMS Commands

SMS Commands

NOTES: Command words are not case sensitive. A separator between command words may be used (or not). To receive an acknowledgement reply, add RP to the end of an SMS

command.

Full Arm: code + A (Example: 1234A)| Get system status: code + ST
Home Arm: code + H| Bypass Zone: code + B + zone number
Group Arm: code + G + select group A–D| Un-bypass Zone: code + UB + zone number
Full Disarm: code + D| View last alarm : code + AL
Partition Full Arm: code + A: + partition number| Change FM number: code + FMPHONE + FM serial number +

NEW + new phone number

Partition Home Arm: code + H: + partition number
Multiple Partition Full/Home Arm: code + A/ H: + partition number A, + partition number B, +

partition number C, etc.

| Activate Output: code + UOON + UO number
Partition Disarm: code + D: + partition number| Deactivate Output: code + UOOFF +

UO number

Multiple Partition Disarm: code + D: + partition number A, + partition number B, + partition number C, etc.| Get SIM credit level: code + CR

Icons – Elegant Keypad

Icons – Elegant Keypad

    Power On: Power OK.

Off: No power

Rapid flash: System trouble. Slow flash: System is programming

| Ready

On: Ready to arm

Off: Not ready to arm Slow flash: Ready to arm while entry/exit zone is open

|   Arm

On: System in fully armed mode

Off: System disarmed

Rapid flash: Alarm

Slow flash: System in Exit

Delay

  Partial Arm / Bypass On: System in partially- armed or zone-bypassed mode

Off: No bypassed zones

|   Tamper

On: Tamper alarm

Off: No tamper alarm

|   Fire

On: Fire alarm

Off: No fire alarm

Flash: Fire circuit trouble

LED Indicators – 2-Way Remote Control

Operation| **Send
command*| Receive
Status**
---|---|---
Full Arm| Green| Red
Partial Arm| Green| Orange
Disarm| Green| Orange
Alarm| Green| Flashing LED

If the LED changes to orange, it indicates a low battery condition.

Defining User Codes – Elegant Keypad

  1. ➢ Grand master code (default = 1234)
  2. to scroll to Codes/Tags ➢ press twice.
  3. to scroll to the user (index number) for defining ➢ press twice.
  4. Enter (or re-enter) a 4—6 digit code ; the system beeps and ACCEPTED displays

Defining User Codes – Panda Keypad

  1. ➢ Grand master code (default = 1234)
  2. to scroll to Codes/Tags ➢ press twice.
  3. to scroll to the user (index number) for defining ➢ press twice.
  4. Enter (or re-enter) a 4—6 digit code ; the system beeps and ACCEPTED displays

Registering to the RISCO Cloud

  1. After the RISCO Cloud has been enabled by your system installer, go to www.riscocloud.com
  2. Fill in your first and last name.
  3. Enter your e-mail address as the Login Name (required for 1st-time activation).
  4. Define password (minimum of 6 characters and at least one digit), and then confirm.
  5. Enter the 15 digits Panel ID as it appears as printed on the postcard packaged with the main panel. You can also view it on the keypad (see the LightSYS Plus User Manual).
  6. Complete registration form, and then press Register.
  7. Open the e-mail received at the email account you had defined as the Login Name in step 3, and then click the link to activate your registration to the Cloud.

Logging in to the RISCO Cloud / Accessing the Web User Application

  1. Go to www.riscocloud.com
  2. Enter your user name and password (as defined during the registration process).
  3. Enter the system PIN code (user code).
  4. Click Enter.

iRISCO Smartphone App

Download the iRISCO Smartphone app from the Apple App store or the Android Play Store.

For additional information see the LightSYS Plus User Manual, available on our website: www.riscogroup.com
© RISCO Group 2021. All rights reserved.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals