HAFELE 833.95.000 Series Drivers Constant Voltage User Guide

June 11, 2024
HAFELE

HAFELE 833.95.000 Series Drivers Constant Voltage

HAFELE-Series-Drivers-Constant-Voltage-PRODUCT.

Product Information

The HDE is a constant voltage driver that operates on 12V or 24V. It comes in various power ratings ranging from 20W to 90W. The driver is compatible with different types of power supply ranging from 100-240V and 220-240V at 50/60Hz. It is designed to provide electrical safety with its Class II independent appliance that does not rely on the luminaire enclosure for protection against accidental contact with live parts. The product comes with different country- specific power cords, and its protection class is IP 20.

Product Usage Instructions

  1. Ensure sufficient air circulation at the installation location. Do not stack drivers.
  2. Connect the appropriate country-specific power cord to the driver.
  3. Connect the driver to the LED lights or switches.
  4. Check the power rating of the driver and reduce the wattage of the connected lights if necessary.
  5. To clean the product, disconnect it from the mains, and use a soft, dry, and fiber-free cloth to clean its components. Do not use chemical cleaning agents, abrasive cleaners, or liquids.
  6. In case of a defect, replace the entire assembly and contact the manufacturer for assistance.
  7. Do not dispose of the product with household waste. Observe country-specific regulations for proper disposal.

DANGER

  • To reduce the risk of fire or electric shock, carefully follow these instructions. Likewise, read the instructions for the LED lights and switches!
  • Important safety instructions – save these instructions and give them to the user after assembly.
  • The controller is a Class II independent appliance, which does not rely upon the luminaire enclosure for protection against accidental contact with live parts. Constant voltage type controller

SPECIFICATION

HAFELE-Series-Drivers-Constant-Voltage-FIG-
\(1\)

WHAT IN BOX

HAFELE-Series-Drivers-Constant-Voltage-FIG-
\(2\)

PLUG INSTRUCTION

HAFELE-Series-Drivers-Constant-Voltage-FIG-
\(3\)

POWER

INSTALLATION

HAFELE-Series-Drivers-Constant-Voltage-FIG-
\(6\) HAFELE-Series-Drivers-Constant-Voltage-FIG-
\(7\) HAFELE-Series-Drivers-Constant-Voltage-FIG-
\(8\) HAFELE-Series-Drivers-Constant-Voltage-FIG-
\(9\)

Electrical safety

  • Never open or modify product components. Do not insert any foreign objects into the openings of product components, as this could result in electric shock or a short circuit
  • Never expose the product components to moisture and never assemble or store them near water or in damp, aggressive or potentially explosive areas.
  • Never carry the product by the cable and do not use the cable to pull from the socket. Never drill or damage the cable.
  • Keep product components away from heat, sharp edges or moving parts. Install product components such that they cannot be accessed by children.

Intended use

The product is intended for:

  • Assembly on/in furniture,
  • Use in dry, interior spaces (Protection class: IP 20).

Ensure sufficient air circulation at the installation location. Do not stack drivers

Assembly

  • Check the scope of delivery before commencing assembly. If parts are missing or damaged, contact the manufacturer. Never use and assemble damaged parts, or small parts that are not part of the scope of delivery and not approved by Häfele.
  • All product components must be assembled in a currentless condition.
  • Switch off the power supply [i] before commencing assembly.
  • Use suitable fixing material for the furniture [1].
  • Ensure that the total wattage of all connected LED lights and components does not exceed the maximum output power of the driver (see type label) [2].

Cleaning and maintenance

  • Disconnect from the mains. Clean product components with a soft, dry and fibre-free cloth. Do not use chemical cleaning agents, abrasive cleaners or liquids!
  • The product does not contain any parts that should be repaired by the user. In the event of a defect, replace the entire assembly. Contact the manufacturer

Disturbance
The lights connected to the driver flash:

  • Ensure sufficient air circulation at the installation location.
  • The wattage of the connected lights/devices exceeds the output power of the driver. Reduce the wattage of the connected light devices.

Disposal:

  • Do not dispose of household waste.
  • Observe country-specific regulations

Subject to changes
© 2022 by Häfele SE & Co KG
Adolf-Häfele-Str. 1
D-72202 Nagold
www.hafele.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals