HAFELE HSI-21FW Single Induction Hob User Manual

HAFELE HSI-21FW Single Induction Hob

Manual of Induction Cooker

Statement: Because the product update constantly, the following function is not necessarily for every product, it’s depend on the detail model.
Product feature: this product heating by the inside coil, and through the panel to heat the pan.
Environmental protection: non-toxic, no pollution, no electromagnetic radiation
Heat fast: Based on the principle of electromagnetic induction, the bottom is heated directly, which due to a high thermal efficiency, and fast speed.
Use the high hardness and high temperature resistant crystal plate, can easy to clean, also durable to use.
Simple controller, the fire temperature control at will Safe use, it has many function protect, like overvoltage, under voltage, over temperature and fan delay working.
Notice:

1. The plate is hot after using, please do not touch with your hand.
2. Please do not put the machine in water to clean
3. If the power cord be damaged, please replace it in the special store and please use the special cord.
4. Please keep away from the children to use
5. It must be have someone take care of this during using.
6. Please don’t put paper, towels and other flammable items in the furnace heating surface, in case of causing a fire.
7. Please use special socket that more that 10A. (please use at least 15A if two burners and multi-ple burners).
8. Please don’t let children or unconscious ability people to use
9. Please do not insert the wire items to the wind and air outlet, in case of causing electric shock
10. Please do not heat sealed apparatus, in order to avoid explosion.
11. Please do not use if the plate broken until fix it.
12. Every time you finish, the fan keeps working to dissipate the heat , only when the fan stop work-ing, can unplug the power cord.
13. Please do not use the pot that the bottom distort, in case of the plate heating unevenness lead to broken
14. Household and Indoor use only.
15. When the appliance is not in use and before cleaning, unplug the appliance from the outlet firstly.
16. To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.
17. The appliance is only intended for the purpose described in user manual.
18. Do not use appliance or any part of the appliance out of the intended use to avoid risk.
19. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children shall not play with the appliance.
20. Cleaning and user maintenance shall not be made by children without supervision.
21. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
22. Metallic objects such as knives, forks, spoons and lids should not be placed on the hotplate since they can get hot.
23. This appliance is intended to be used in household and similar applications, such as:
    • Staff kitchen areas in shops, offices and other working environments;
    • Farm houses;
    • By clients in hotels, motels and other residential type environments;
    • Bed and breakfast type environments

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental sate recycling.

Technical parameters:

Operator Panel Instruction:

This one is only one of this series of models, the detail please refer

to our real machine.
Suitable Pot & Pan:

Ironware (stainless steel, stainless iron, cast iron) and bottom of pot should be flat, the bottom diameter should be range from 12CM to 20CM.

Unsuitable Pot & Pan:

Materials with aluminum, copper, glass or ceramic pots, and the bottom shape is uneven, bottom diameter less than 12cm or bigger than 20cm.

Function Instruction:

Preparation: place the appropriate POTS on the heating zone of the cooker, plug on the power cord into the appropriate electrical outlet. When hear the “Bi” sound it means the cooker has access to electricity, now consumer could able to operate the cooker.

1. Key functions:
   NOTE: The functions in the following not every of them deserver all which refer to the true one

2. Detail function instruction
   Function| Working process
   ---|---
   Power (Manual function)| Press the knob center after the cooker plug on, the screen will display the default power (P7);
   The cooker include 10 power levels, P1-PP (P1 is the MIN power level, PP is booster function level, MAX level), which can be adjusted to suitable power level by knob, clockwise to adjust bigger levels, anticlockwise to adjust smaller levels;
   The cooker will automatically back to P9 after working 5mins in PP level.
   Timer| Press “timer” during working to enter timing switch off setting, LED screen show “00” without timer setting; After setting time, it will automatically confirmed and turn to switch off count down condition, then automatically off after time out; The LED screen will alternate display time and power after timer setting;
   Timer range is 01-99 mins.

NOTE: the cooker will be automatically off if no timer setting and no other operations

Troubleshooting

1. Power code is loose
2. Check socket and lead whether are in good condition
3. Power whether is on

| After checking out
Cannot boot up after power| **** 1. Whether the plate with the water| Dry before using
A sudden stop when using|

1. Whether the ambient temperature is very high.
2. Whether suction and outlet is blocked.
3. Whether to set the timing.
4. Whether there is no operation for more than 2 hours

|

1. Move to the lower temperature to use.
2. Discharge the bulkhead
3. Normal

Boot up after power but no heat|

1.  Whether in the booking status
2. The damage of circuit board
3. Temperature of plate too high

|

1. Normal
2. Sent to the maintenance station.
3. Wait for the fan to dissipate, cool down temperature

Fault Code:

Clean method:

1. Don’t use acidic or alkaline cleaning fluid to clean the cover. After the neutral cleaner should be used when cleaning, use lukewarm cloth to wipe after the cleaner.
2. Please don’t put the unit directly into the water to clean.
3. Please keep the machine clean, when not in use for a long time, please put it into the plastic bag packaged , non-noise in a cool and dry place.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>