Mirabella Genio I004732 Wi-Fi LED Halo Table Lamp with Wireless Charger Instructions
- June 11, 2024
- Mirabella genio
Table of Contents
Mirabella Genio I004732 Wi-Fi LED Halo Table Lamp with Wireless Charger
Instructions
SAFETY INFORMATION
- Remove set from packaging before connecting to a power supply.
- only use the adaptor that is supplied.
- Ensure that the cable is completely uncoiled whilst set is in use.
- LED bulbs are non-replaceable
PRODUCT INSTALLATION
When connecting the Table lamp to the Wi-Fi controller, make sure the arrows are aligned with each other.
Wi-Fi pairing information (BK, EZ and AP method)
- Download “Mirabella Genio” App from the APP store or Google Play and register an account.
- Connect your mobile phone to 2.4GHz Wi-Fi network. (Please note, that this unit does not support 5GHz Wi-Fi)
- Connect the Wi-Fi controller to the light, and the adaptor to the Wi-Fi controller
- Wait for the light to commence to blink.
If the Table light does not start to blink when first powered on, Press and hold the ON/OFF button on the Wi-Fi controller, until it starts to blink
| If you having difficulty connect this lamp to the Genio APP, wait for 3
minutes and lamp stopped working, you can control this lamp manually using the
button on WiFi controller.
---|---
Bluetooth BK method
Our latest genio smart Wi-Fi lighting range has a Bluetooth pairing assist ,
to take advantage of this function, please ensure that he Bluetooth on your
phone is turned on.
Make sure the light is blinking fast (2 blinks per second), Open Mirabella
Genio app, tap on the plus symbol ,
The APP will now automatically find the lights, once the app identifies the
lights, follow the instructions below finalise the pairing of the lights to
the App.
Fasting blinking EZ method (when the Bluetooth on the phone is turned off)
- Open the Mirabella Genio app, tap on the plus symbol .
- Select Genio Tube light under the smart lighting, then follow the in-app prompts to connect tube light to your app
Slow blinking AP method (1 blinking per 2 second)
If the fasting blinking method didn’t work for you, please try the slow
blinking AP method.
While the light is fast blinking, press and hold the ON/OFF again and wait for
the light to start blinking slowly (1 blink per second).
If you cannot see the SmartLife-xxxx on the list, it means the light was not blinking slowly, please reset it and try again.
After you have connected to SmartLife_XXXX, return back to the Mirabella Genio app and it will commence the 0-100% countdown and connection process, once complete, your lights are now paired to the app.
| Please pay attention to this screen to determent the cause of time-out error
If the light never stops blinking, there could be issue with the Wi-Fi
controller, please check our online FAQ page before returning it
if light stopped blinking, but unable progress to “register on cloud” it
indicates communication error with your router to our cloud service please
read our online FAQ regarding the common router setting| please check our
online FAQ page and ensure.
- You enter the correct 2.4GHz WiFi name and password
- Wi-Fi controller is in a location with good Wi-Fi coverage, try move it closer to the router
- 5Ghz Wi-Fi signal is turned off on the router (can be turn on after the device is connected)
- if you are using IOS 14, please ensure “local network” permission is turned on for Genio APP
---|---|---
FAQ:
Q. I have internet/power outage and device went offline and does not
reconnect back online by itself?
A. Go the device’ settings page (pencil or … icon), look for “remove
device” Remove it and reset the device and pair it again through the app.
If you still having issue with pairing after use AP method, please check our online FAQ pages on www.mirabellagenio.com.au/f
Mirabella International Pty Ltd
1 Mirabella Drive Tullamarine VIC. 3043 Australia
t: 1800 636 528
e: genio@mirabella.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>