mirabella genio I003879 Smart Star Projector User Guide

Quick Start Guide

Mirabella Genio Smart Star Projector

KEYCODE: I003879
Version 3.0  27/7/2021

The smart star projector is an entertaining electronic device and able to project the starry sky with gloating colorful clouds onto your ceiling giving you the visual experience of the milky way and galaxy nebula without stepping outside of your room.

1. Laser light
2. Projector light
3. Switch button
4. Microphone

SPECIFICATION

Warnings:
Please keep away from children. Children need to use it under adult supervision.
Please use the product in line with instructions.
Do not stare directly at the projection lens.
Do not disassemble and assemble by yourself.
For indoor use only. (Works better in a dark environment)
Only use with the adaptor provided.
Do not point the laser light at the person or pet.
Please keep your distance from the water to avoid damage.
Do not cover the laser light with cloths or other objects.

| CAUTION
---|---
Class 1 Invisible Laser Radiation Present
Avoid long-term viewing of a laser.

APP control/Manual Control Mode

This star projector can be used either manually or via the Genio App.

To make it ready for APP pairing, press and hold the power switch button until the  RED Laser starts to blink rapidly, the projector is now ready to be paired with Genio  App, and if no action is taken, after 3 minutes it will stop blinking. Once it has stopped blinking, you can use shote press the switch button to change the projection mode manually.

Connection Preparation for it to be used with the Genio App.

Your phone must be connected to 2.4Ghz Wi‐Fi and not to the 5GHz network.

To verify your mobile device is set to a 2.4Ghz Wi‐Fi network, navigate to the Settings menu and click on Wi‐Fi.   In this menu, you will see all the detectable networks in your area. Locate the SSID (the name of your network) and ensure that the Wi‐Fi SSID does not end with a 5G / 5GHz.

Once you have confirmed that you have selected the 2.4GHz network, check that you have a strong WI‐FI signal (at least two bars) in the location where the smart device is to be installed.

If you don’t have at least two bars signal on your phone, then you may need to reconsider relocating the smart device to a different location or obtain a Wi‐Fi extender to boost the Wi‐Fi signal strength.

Install the APP and register Account
For the best experience, download the “Mirabella Genio” APP to your smartphone from the App Store or Google Play,  the Genio APP icon will be displayed after it has been installed successfully. Then open Mirabella Genio APP and register an account.

Bluetooth Pairing method

Our latest genio range has the Bluetooth pairing assistant function, to make the pairing even easier than before, to take advantage of this function, please turn ON your phone’s Bluetooth
Press and hold the switch button and wait for the RED laser to start rapidly blinking, once the RED Laser is blinking, the projector is ready to pair,

1. Open the Mirabella Genio APP, tap on the “+” on the top right
2. Genio APP will automatically discover the projector, tap on Go to add,
3. Then select the plus symbol +, then enter your 2.4Ghz Wi‐Fi name and password (don’t use Wi‐Fi name that ends with ‐5G), confirm

Follow the APP’s instructions carefully to complete the network pairing process

if the Bluetooth method doesn’t work for you, please turn the  Bluetooth OFF on the phone, then try the EZ method below

Pairing the Star Projector using Mirabella Genio App (EZ method)

1. Remove the protective film sticker from the laser lens

2. Connect the power to the projector using the supplied adapter then power it on.

3. The RED laser will start blinking rapidly (2 blinks per second) – The projector is now ready to pair.
   If the RED laser is not blinking, press and hold the switch button on the Star Projector until the RED laser start to blink rapidly,

4. Open the Mirabella Genio APP, then tap on the “+” symbol, then choose Electrical, and select   Star Projector from the menu. Follow the APP’s instructions carefully to complete the network pairing process.

Please pay attention to  the screen to determent the cause of the time‐out

| If the red laser light never stops blinking, there could  be an issue with your phone’s setting, if you are  using IOS14, please make  sure to turn the “local network” permission on for Genio APP

if the light does stop blinking but is unable to progress to “register on the cloud”   it indicates a communication error with your router to our cloud service (need to check router setting)

| please check and ensure
1. You enter the  correct 2.4Ghz Wi‐Fi  name and password
2. Your projector is receiving a good Wi‐Fi
signal.
3. manually turning off the 5Ghz Wi‐Fi signal is
Turn off the router and keep the  2.4Ghz WI‐Fi on only.
---|---|---

Star Projector APP UI (subject to change with software update)

FAQ:

How to connect Star Projector to another router/genio account?
Go to the Star Projector settings page, look for “remove device” Remove it and reset the star projector and pair it again through the APP.

Star Projector goes offline and doesn’t reconnect back after a power failure?
Go to the Star Projector settings page, look for “remove device” Remove it and reset the Star Projector and pair it again through the APP.

Using the EZ method and still Receiving the time out Cannot find Device error?
Try borrowing an Ipad or iPhone to pair, download the Genio APP to iPad or iPhone, log in using your existing genio user name and password, pair it, then go back to your android device, it will show up under your account
Ensure Star Projector is in a location with strong Wi‐Fi signal coverage
Manually disable the 5Ghz Wi‐Fi signal on the router setting (please contact your internet provider if you are not sure how to disable it)
Ensure that the 2.4Ghz Wi‐Fi signal is on.
Ensure the RED laser is rapidly blinking.
Please check you have entered the correct 2.4Ghz Wi‐Fi SSID and password

I am using Optus/Telstra NBN smart modem, and I cannot get it to pair? please try using the method listed on the https://www.mirabellagenio.com.au/faqs/

If you have done all of the above, ensuring that the 5Ghz is disabled and still failed to connect, then your modem could be incompatible with the smart device or you may have reached the max number of the WI‐FI devices your router can support.

All trademarks are used for reference purposes only.  Made in China

MIRABELLA INTERNATIONAL PTY LTD
1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043
TOLL-FREE: 1800 636 528, www.mirabellagenio.com.au

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>