kanto DML1000 Single Arm Desktop Monitor Mount User Manual

kanto DML1000 Single Arm Desktop Monitor Mount

Product Information

• Product Name: DML1000
• Type: Single Monitor Arm
• Compatibility: Supports monitors with VESA compliance, 75 x 75 mm and 100 x 100 mm
• Monitor Size: 17 – 34 inches or 43 cm – 86 cm
• Max Load Capacity: 16.7 lbs or 7.6 kg
• Max Arm Reach: 16.7 inches or 425 mm
• Adjustability: Tilt range of 0.4-2.8 inches or 10 mm – 70 mm; Height adjustment of 5.1 inches or 130 mm; Swivel range of ±90°; Rotational range of ±180°

Product Usage Instructions

1. Mount Monitor Plate: Attach the monitor plate to the back of your monitor using the provided screws.
2. Mount Base to Desk:
3. Desk Clamp: Use the desk clamp to attach the base to the edge of your desk. Place the clamp on the edge of your desk and tighten it using the included tools.
4. Grommet: Use the grommet to attach the base to a hole in your desk. Place the grommet in the hole and tighten it using the included tools.
5. Mount Arm: Attach the arm to the base and adjust it to your desired height and angle using the adjustable features.
6. Mount Monitor: Attach the monitor plate to the arm and tighten it using the included tools.
7. Finalize Adjustments: Make final adjustments to the tilt, height, swivel, and rotation of the arm to ensure optimal viewing comfort.

Note: Please refer to the user manual for detailed instructions and safety information. If you experience any issues with your product, please contact Kanto customer support for assistance.

SINGLE MONITOR ARM

• Supporting your digital lifestyle

Thank you for choosing Kanto

Read these instructions fully before assembly and installation. If you do not understand these directions, or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts. Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.

CAUTION
The maximum loading weight is 22 lb (10 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury. The desk you plan to affix the Kanto mount to must be able to support more than 5 times the weight of the monitor and the mount combined. Do not use this product for any purpose other than to mount a VESA compliant monitor on a desktop as outlined in this manual. Improper installation may cause damage to your monitor or serious injury. Consult a qualified installation contractor if you are unsure about the type of surface you may have.

• 1-888-848-2643
• support@kantoliving.com
• kantomounts.com/resources/dml1000

Find product and installation resources online

Supplied Parts and Hardware

• Mount Desk Clamp
• Mount Grommet
• Included Tools

Required Tools

• T not used for DML1000 setup

Project Overview

1. Mount Monitor Plate
2. Mount Base to Desk
3. Mount Arm
4. Finalize Adjustments
5. Manage Cables

IMPORTANT!: Please read this entire document before attempting assembly.

If you have any problems or difficulties while following these instructions, please contact Kanto directly:

• Email: support@kantoliving.com
• Toll Free: US & Canada: 1-888-848-2643

Mount Monitor Plate

Mount Desk Clamp

Mount Grommet

Mount Arm

Mount Monitor

Finalize Adjustments

Manage Cables

Limited Warranty to Original Purchaser

Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free from defects in material for the limited warranty period of 5 years. If equipment fails because of such defects and Kanto is notified within 5 years from the date of shipment with proof of original invoice from an authorized reseller, Kanto will, at its option, provide replacement parts or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Any replacement parts or replacement units are warranted for 90 days from the day of reshipment to the original purchaser. Customers will be responsible for obtaining a Return Authorization Number and paying shipping costs to return product to a Kanto location or authorized depot. If the equipment is covered under the warranty provisions above, Kanto will replace parts or provide a replacement unit, and be responsible for shipping costs to the customer. Please keep the original packaging to prevent damage to the product during shipping. Insuring your shipment is also recommended. The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the equipment, even if advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty, including any warranty of merchantability and fitness for any particular purpose, all of which are expressly disclaimed.

• www.kantomounts.com
• support@kantoliving.com
• Toll Free: 1-888-848-2643

References

• Kanto DML1000 Height Adjustable Desktop Monitor Mount

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>