Data Signs Portable Traffic Light Controller NxG User Guide
- August 15, 2024
- Data Signs
Table of Contents
Data Signs Portable Traffic Light Controller NxG
Product Specifications
- Product Name: Portable Traffic Light
- Usage: Onsite traffic management
- Operation: Requires qualified traffic managers
- RF Channels: 1-8
- Modes: Demand, Auto (Timed), Manual
Information
CAUTION: THE DATA SIGN PORTABLE TRAFFIC LIGHTS SHOULD ONLY BE OPERATED BY QUALIFIED TRAFFIC MANAGERS. IF YOU HAVE HIRED OUT THIS PTL, CONTACT THE HIRE COMPANY FOR ASSISTANCE.
CHECK: CAN YOU SEE THE OTHER LIGHT?
LINE OF SIGHT IS REQUIRED.
BOTH LIGHTS MUST BE SET, USUALLY DO THE SUB PTL FIRST.
Using Instructions
- Press and hold to switch ON. Then press
- From the Main Menu, select QUICK START and press
The Quick Start menu item is used to get your PTL Lights set up in a few simple steps:
- To set up each PTL, select for Sub or for MAIN controller and press
- Select the RF Channel (1-8) or press to keep current channel.
- Select * YES = OPERATION
- Enter the ROAD LENGTH.
- If you are setting the MAIN PTL, set the ROAD SPEED and GREEN TIME also.
- Finally, select Shuttle or Plant Crossing operation.
MODES
The current MODE setting is shown on the top display line in between the square brackets. i.e. [AUTO] as per above display screen.
- DEMAND is Vehicle-actuated Mode. Vehicle detectors MUST be fitted.
- AUTO (TIMED) is Automatic Timed Mode.
- MANUAL is Manual Mode (using the and buttons or the PTL REMOTE).
Note: If Lights are not operating as expected, from the MAIN MENU, select FACTORY RESET and then do the QUICK START again (this will reset all setting back to the default settings).
FAQ
Frequently Asked Questions
- Q: Can anyone operate the Portable Traffic Light?
- A: No, only qualified traffic managers should operate the Portable Traffic Light.
- Q: What should I do if the lights are not operating correctly?
- A: Perform a FACTORY RESET from the MAIN MENU and redo the QUICK START setup to reset settings.
More Information
Video demonstrations
Scan the QR code and select the appropriate video to watch.