STAHL CMP-20PX2K Cable Gland With Compound Installation Guide
- June 9, 2024
- STAHL
Table of Contents
STAHL CMP-20PX2K Cable Gland With Compound
Instructions
- Ex d and Ex e cable entry for all armored cables: SWA, braid- and tape-type steel or aluminum armoring
- Sealing: Explosion-protected seal with compound, controlled outer load retention seal, and flood seal with integral protection
- Worldwide certification in accordance with IECEx, ATEX, UL, and cCSAus, EMC- tested
PX2K series metal Ex d and Ex e barrier cable entries are suitable for all types of armoured cables, i.e. for SWA, braid- and tape-type steel, and aluminum armor. They are equipped with a com-pound barrier. They feature a multi-functional holder for the armouring and various seals. They are also EMC- tested.
Technical Data
Explosion Protection
Ex version| Ex e & Ex d & Ex nR & Ex ta
Application range (zones)| 1
2
20
21
22
IECEx gas certificate| IECEx CML 18.0182X
IECEx gas explosion protection| Ex db IIC Gb
IECEx dust certificate| IECEx CML 18.0182X
IECEx dust explosion protection| Ex ta IIIC Da
IECEX firedamp certificate| IECEx SIM 14.0008 X
IECEx firedamp protection| Ex db I Mb
IECEx firedamp protection 2| Ex eb I Mb
IECEx restricted breathing certificate| IECEx CML 18.0182X
IECEx restricted breathing| Ex nR IIC Gc
ATEX gas certificate| CML 18ATEX1325X
ATEX gas explosion protection| E II 2 G Ex db IIC Gb
ATEX dust certificate| CML 18ATEX1325X
ATEX dust explosion protection| E II 1 D Ex ta IIIC Da
ATEX firedamp certificate| CML 18ATEX1325X
ATEX firedamp protection| E I M2 Ex db I Mb
ATEX firedamp protection 2| E I M2 Ex eb I Mb
ATEX restricted breathing certificate| CML 18ATEX4317X
ATEX restricted breathing| E II 3 G Ex nR IIC Gc
EAC certificate| TS RU S-GB.AA87.B.00487
EAC gas explosion protection| 7 1 Ex d e IIC Gb X
7 2 Ex nR IIC Gc X
Explosion Protection
EAC dust explosion protection| 7 Ex ta IIIC Da X
Notes| The product certification and certificates can be downloaded from the
manufacturer’s homepage
Ambient Conditions
Ambient temperature| -60 °C … +85 °C
Mechanical Data
Version| 20
Strain relief| No
Degree of protection (IP)| IP66
Degree of protection note| IP67 and IP68 mounting in accordance with the
specifications of the manufacturer, CMP
Sealing material| SOLO LSF
Sealing ring material| Viton
Material| Nickel-plated brass
Silicone-free| Yes
Clamping range| 12.5 – 20.9 mm
Armouring type| All armouring
Armouring type 2| Without lead sheath
Armouring type 3| With barrier seal
Clamping range| 12.5…. 20.9 mm
Max. number of cores| 11
Construction type| BS 6121, IEC/EN 62444
Width across corners| 33.6 mm
Width across flats| 30.5 mm
Thread size| NPT1/2
Thread length| 19.8 mm
Thread pitch| 14 TPI
Thread standard| NPT
Gland size| 20
Grooved cone| 0.4 … 1 mm
Stepped cone| 0.8 … 1.25 mm
Inner sheath| 12.6 mm
Max. internal conduit diameter| 12.9 mm
Outer sheath| 12.5 … 20.9 mm
Protrusion length| 63 mm
Impact strength| 20 J
PVC boot| PVC06
Lot size| 1
Weight| 0.24 kg
Weight| 0.53 lb
Dimensional Drawings
(All Dimensions in mm [inches]) – Subject to Alterations
- A = Max. inner sheath
- G = Max. internal conduit diameter
- B = Outer sheath
- C = Thread size
- D = Width across corners
- D = Width across flats
- E = Thread length
- F = Protrusion length
We reserve the right to make alterations to the technical data, dimensions, weights, designs, and products available without notice. The illustrations cannot be considered binding.
R. STAHL Schaltgeräte GmbH | Am Bahnhof 30 | 74638 WALDENBURG
Tel. +49 7942 943 1700 | +49 7942 943 1777 | Email:
sales.de@r-stahl.com |
r-stahl.com.
References
- R. STAHL | Explosion Hazard Systems | Industrial Explosion Protection
- You will find a little bit of Stahl chemistry everywhere | Stahl | Stahl
- Specialists in Cable Glands & Cable Cleats | CMP Products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>