vtech Switch and Go Hatch and Roaaar Egg T-Rex Racer Instruction Manual

: June 11, 2024
: vtech

Table of Contents

INTRODUCTION
INCLUDED IN THE PACKAGE
GETTING STARTED
IMPORTANT: BATTERY INFORMATION
Disposal of batteries and product
ASSEMBLY INSTRUCTIONS
HOW TO SWITCH
EGG SHELL DINO STORAGE
PRODUCT FEATURES
CARE & MAINTENANCE
TROUBLESHOOTING
CONSUMER SERVICES
PRODUCT WARRANTY/ CONSUMER GUARANTEES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

vtech Switch and Go Hatch and Roaaar Egg T-Rex Racer Instruction Manual

INTRODUCTION

Assemble this powerful T-Rex, then switch it to and from a revved-up race car in just a few simple steps! Add dino roars and cool engine sound effects along with flashing lights. Stomp, chomp and roar!
Overview

Off / Dino Mode / Vehicle Mode Switch

INCLUDED IN THE PACKAGE

Switch & Go Dinos® Eggs T-Rex
15 Pieces for Assembly
Quick Start Guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety
NOTE
Please save this Instruction Manual as it contains important information.

GETTING STARTED

Exit Try-Me Mode:
The product is in Try Me mode in the packaging. To exit try-me mode, just slide the “Off/Dino Mode/Vehicle Mode” Switch from Vehicle mode to Dino mode/Off.

Battery Removal and Installation

Make sure the unit is turned OFF.
Locate the battery cover on the bottom of the unit. Use a screwdriver to loosen the screw and then open the battery cover.
If used batteries are present, remove these batteries from the unit by pulling up on one end of each battery.
Install 1 new AAA (AM-4/LR03) battery following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
Replace the battery cover and tighten the screw to secure.

WARNING:
Adult assembly required for battery installation. Keep batteries out of reach of children.

IMPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
Remove rechargeable batteries (if removable) from the toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

Disposal of batteries and product

The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.

The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.

The solid bar indicates that the product was placed on the market after 13th August, 2005.

Help protect the environment by disposing of your product or batteries responsibly.

VTech® cares for the planet.
Care for the environment and give your toy a second life by disposing of it at a small electricals collection point so all its materials can be recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with your local council for kerbside collections.

ASSEMBLY INSTRUCTIONS

Identify the following pieces for assembly:
Separately install the A, B, C, D, E, F, G and H parts as shown in the illustrations.

HOW TO SWITCH

Dino mode.
Flip the tail up towards the Dino’s head.
Flip up the Dino’s mouth, then flip up the front claws. Next, flip up the Dino’s feet.
The Dino is now in Vehicle mode. Slide the Off/Dino mode/Vehicle mode Switch to Vehicle mode to play Vehicle responses.

Note: To switch from Vehicle mode to Dino mode, follow the above steps in reverse order.

EGG SHELL DINO STORAGE

T-Rex can be dismantled and stored back inside the egg shell. Follow the below steps to store T-Rex:
Egg Shell Dino Storage

Place the battery module and the 2 larger dino pieces into the egg shell as illustrated.
Egg Shell Dino Storage

Put the remaining dino pieces into the other half of the egg shell. Then, connect the first half of the egg shell to seal.

PRODUCT FEATURES

1. OFF / DINO MODE / VEHICLE MODE SWITCH
Slide the Off / Dino Mode / Vehicle Mode Switch to Dino Mode or Vehicle Mode to play. Slide the switch to the Off position to turn the unit Off.
Talk Button
Press the Talk Button to hear fun phrases and cool dinosaur sounds in Dino mode, or hear fun phrases and great vehicle sounds in Vehicle mode.
Automatic Shut-Off
To preserve battery life, the T-Rex will automatically shut off after a few seconds without input. The unit can be turned on again by pressing the Talk Button or by switching between Dino and Vehicle modes.

Note: If the unit powers down or if the light flashes 3 times without sounds during play, please install a new set of batteries.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

Turn the unit Off.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit On. The unit should now be ready to use again.
If the unit still does not work, install a new set of batteries.

If the problem persists, please contact our Consumer Services Department and a service representative will be happy to help you.

CONSUMER SERVICES

Creating and developing VTech ® products is accompanied by a responsibility that we at VTech ® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.

UK Customers:
Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support
Australian Customers:
Phone: 1800 862 155
Website: support.vtech.com.au
NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au

PRODUCT WARRANTY/ CONSUMER GUARANTEES

UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/ consumerguarantees for further information.

Visit our website for more information about our products, downloads, resources and more.
www.vtech.co.uk
www.vtech.com.au