ANKER 313 Ace 45W Charger User Manual
- June 11, 2024
- Anker
Table of Contents
ANKER 313 Ace 45W Charger
Anker 313 Charger (Ace, 45W)
Before using the product, please read all the instructions carefully. In case of failure or component defect, please contact the personnel or dispose of the product.
Using Your Product
The Anker 313 Charger has two USB-C ports to charge your devices.
- USB-C port 1: 5.0V 3.0A 15.0W / 9.0V 3.0A 27.0W 15.0V 3.0A 45.0W / 20.0V 2.25A 45.0W (45.0W Max) PPS: 3.3V-11V 5A /3.3V-16V 3A / 3.3V-21V 2.25A (45W Max)
- USB-C port 2: 5.0V 3.0A 15.0W / 9.0V 2.22A 20.0W / 12.0V 1.5A 18.0W (18W Max)
The Anker 313 Charger can operate in temperatures ranging from
0-25 / 32-77 degrees Celsius.
Specifications
- Input: 100-240V ~ 1.87A 50-60Hz
- Output: USB-C Port 1: 45W Max, USB-C Port 2: 18W Max
- Operating Temperature: 0-25 / 32-77 degrees Celsius
Customer Service
If you have any questions or concerns about the Anker 313 Charger, please contact customer service. The product is covered by a limited warranty.
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed.
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Warning
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. The
following importer is the responsible party (for FCC matters only). Company
Name: Fantasia Trading LLC
Address
5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988
7973
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
IC Statement
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2677 is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of Conformity is available at the following internet address:https://www.anker.com
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic
Compatibility Regulations 2016 & The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 &
The Ecodesign for Energy-Related Products Regulations 2010. The full text of
the GB declaration of conformity is available at the following internet
address: https://www.anker.com. Indoor use only
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point to
recycle electrical and electronic equipment.
Specifications
Input|
100-240V ~ 1.87A 50-60Hz
---|---
Output| 5.0V 3.0A 15.0W / 9.0V 3.0A 27.0W
15.0V 3.0A 45.0W / 20.0V 2.25A 45.0W (45.0W Max)
PPS: 3.3V-11V 5A /3.3V-16V 3A /
3.3V-21V 2.25A (45W Max)
Operating Temperature| 0-25℃ / 32-77 ℉
Anker Innovations Limited
- Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
- Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Limited GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP,
Customer Service
- 18-month limited warranty
- Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
- Lifetime technical support
support@anker.com support.mea@anker.com (For Middle East and Africa Only)
-
(US/CA) +1 (800) 988 7973
-
(UK) +44 (0) 1604 936200
-
(UAE) +971 800032081
-
For tutorial videos, FAQs, manuals, and more information,
-
please visit:https://support.anker.com
-
Or scan the QR code below.
-
Product Number: A2677 51005003743 V02
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>