namron 3.04.12881 Zigbee Water Leak Sensor Instruction Manual
- June 11, 2024
- NAMRON
Table of Contents
3.04.12881 Zigbee Water Leak Sensor
Instruction Manual
3.04.12881 Zigbee Water Leak Sensor
220-240V~50/60Hz
| Description: | Water Leak Sensor |
|---|---|
| IP Rated: | IP44 |
| Protocal: | Zigbee 3.0 |
| Wireless Range: | 100m Outdoor, 30m Indoor |
| Power Source: | 3V, AAA*2 |
| Max. Working Current: | 53mA |
| Standby Current: | ＜3uA |
| Operating Temp: | -10°C ~ 4 0°C |
| Operating Humidity: | Up to 85% non-condensing |
| Dimension: | 68.268.221.6mm |
MOUNTING
This water Leakage sensor has two sensing pads on the bottom of the body that activates when water is present between the two pads. The pads are in contact with the floor surface when the sensor is placed in its operating position.
OPERATION
-
FACTORY RESET
Long Press Button B for 10s, A will blink quickly in red after 10s, release B and A will stay solid for 3s to reset. -
ADD TO THE ZIGBEE NETWORK
Short press B for 3 times,
• if the device is not in the network, A will blink slowly in orange, then it will start searching network and adding.
• if the device is in the network, A will blink slowly in green for 5s. Then please do factory reset then pair. -
INDICATOR MEANING
A blink slowly in green for 7 times: Device powered on
A blink slowly in orange:Network pairing(timeout 2mins)
A stay in solid green:Network pairing successful.
A stay in solid orange for 3s:Network pairing failed.
A blinking in orange once per minute:battery power empty soon
A blinking quickly in orange for 3s:Lost connection with hub
MEASURES
Namron AS-Nedre Kalbakkvei 88 B N-1081 Oslo-Norway
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>