AIRZONE RLC1050020BKX Curved Blade Nozzle 1 Direction Instructions
- June 11, 2024
- AIRZONE
Table of Contents
RLC1050020BKX Curved Blade Nozzle 1 Direction
Product Information: Flowtool RLC1/2 Curved-Slat Grille
The Flowtool RLC1/2 is a diffusion grille made from extruded aluminum with a standard frame measuring 26 mm and mobile curved horizontal slats that can be individually adjusted, adapting the range and air stream to the required needs. The grille is available in the following options:
- RLCX [XXX] [XXX] [X] [X] [XX]
- *H:** 100 – 600 mm, L: 200 – 1000 mm
- RLCX [XXX] [XXX] [X] [X] [RT]
- *H:** 100 – 400 mm
- RLCX [XXX] [XXX] [X] [X] [RA]
- RLCX [XXX] [XXX] [X] [X] [R2]
*H: Height
Product Usage Instructions: Flowtool RLC1/2 Curved-Slat Grille
To install the grille, follow the instructions below:
- For wall installation, insert the grille into the opening until it clips into place. For ceiling installation, use screws or latches to fix it in place.
- If using screws or latches, locate the screws that adjust the latches and screw them in the correct position until the grille is fixed in place.
- If required, use an assembly frame for installation.
To adjust the air stream and range, use the mobile curved horizontal slats that can be individually adjusted on the grille.
FLOWTOOL
Visit Flowtool to calculate/select your installation.
CURVED-SLAT GRILLE
Diffusion grille made from extruded aluminum with a standard frame measuring 26 mm and mobile curved horizontal slats that can be individually adjusted, adapting the range and air stream to the required needs. The following options are available:
- All-nothing: The damper occupies 100% of the grille
- Minimum air: The damper occupies 80% of the grille
- 2×1: The damper occupies 50% of the grille
RLCX [XXX] [XXX] [X] [X] [XX]
COMPATIBLE ACCESSORIES
- PREJxx
- LAG
- FR-X2F
- CREJ
- DFxx
INSTALLATION
- Insert the grille into the opening until it clips into place.
- Fit the grille into the opening and screw it tightly into place.
- For ceiling installation, the use of screws or latches is necessary.
- Fit the grille in the opening. Locate the screws that adjust the latches and screw them in the correct position until the grille is fixed in place. Requires assembly frame.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>