CREATIVE MF8410 Stage SE Under Monitor Soundbar User Guide

June 11, 2024
Creative

CREATIVE MF8410 Stage SE Under Monitor Soundbar
CREATIVE MF8410 Stage SE Under Monitor Soundbar

MULTI-LANGUAGE QUICK START GUIDE DOWNLOAD

creative.com/support/StageSE
MULTI-LANGUAGE QUICK START GUIDE DOWNLOAD

OVERVIEW

OVERVIEW

  1. Volume Control Knob
  2. LED Indicator
  3. Multifunction Button (Power, Source Selection, Bluetooth®)
  4. DC-in Power Port
  5. USB-A Port (For Firmware Updates Only)
  6. USB-C Port (For USB Audio Playback)

CONTROLS

CONTROLS

Note: Upon powering on, Creative Stage SE will automatically initiate Bluetooth pairing when source input is switched from USB Audio to Bluetooth.

LED Indicator Soundbar State

Solid Red
| Standby
Solid Purple
| USB Audio
Blinking Blue
| Bluetooth Pairing Mode
Solid Blue
| Bluetooth Paired
Blinking LED (Source Color)
| Volume Adjustment

CONNECTIVITY

CONNECTIVITY
CONNECTIVITY

IR REMOTE CONTROL

IR REMOTE CONTROL

  • a Power Button
    Press once to turn on the soundbar.
    Press once again to turn it off.

  • b Input Selection Button
    Press once to switch between USB Audio mode and Bluetooth mode.
    Press and hold for 2s to initiate Bluetooth pairing mode.

  • c Mute Button
    Press once to mute the soundbar.
    Press once again to unmute.

  • d Volume + Button
    Press once to increase volume.

  • e Volume – Button
    Press once to decrease volume.

  • f Play / Pause Button
    Press once to play / pause audio playback.

  • g Previous Track Button
    Press once to return to previous track.

  • h Next Track Button
    Press once to skip to next track.

  • i Tone – Button
    Press to increase audio warmth; this will increase the prominence of bass reproduction and vocals.

  • j Tone + Button
    Press to increase audio brilliance; this will increase the prominence of high and upper mid frequencies, making the audio crisper.

  • k Surround Button
    Press once to activate Surround mode; this mode will deliver expanded soundstage and spatialized audio for a more immersive experience.
    Press once again to turn it of

  • l Dialog Button
    Press once to activate Dialog Plus mode; this mode provides improved vocal intelligibility in spoken dialogs, allowing you to hear each syllable clearer.
    Press once again to turn it off.

  • m Reset Button
    Press once to revert all changes made, including Tone, Surround, and Dialog settings.

INTERCHANGEABLE AC PLUGS

Creative Stage SE includes a power adapter with interchangeable AC plugs, suitable for use in multiple regions. Refer to the instructions below for more information.

Replacing Interchangeable AC Plugs

  1. Place the AC plug on the power adapter, then push it down and turn clockwise direction to lock it

  2. Press and turn the AC plug anti-clockwise to remove from the power adapter

Note: Interchangeable AC plug(s) are bundled based on the requirements in their respective countries and are suitable for use in regions using the same AC plugs.

  • EU / Singapore (Plug with 4mm pin diameter)

  • Singapore / UK / Hong Kong / Saudi Arabia / UAE / Malaysia

  • Korea (Plug with 4.8mm pin diameter)

  • USA / Canada / Japan / Taiwan

  • Australia

  • China

MASTER RESET

Press and hold the power button on the provided IR remote control for 8s to perform a Master Reset. Upon completion, a voice prompt will trigger with the prompt “Reset
To Factory Default” and the soundbar will revert to its default state. Master Reset is reserved for cases where users encounter issues while the soundbar is in use or during situations such as: Bluetooth Pairing failure, random LED blinks, or to reset all data.

TECHNICAL SPECIFICATIONS

Power Output: 12W RMS x 2
Total System Peak Power: 48W
Frequency Range: 55–20,000 Hz
SNR: ≥ 80 dB
Operating Frequency: 2402–2480 MHz
Operating Range: Up to 10m / 33 ft, measured in open space. Walls and structures may
affect range of device
Maximum   RF Output Power: 7 dBm
Bluetooth Version: Bluetooth 5.3
Supported Bluetooth Profiles: A2DP (Advanced Audio Distribution Profile), AVRCP (Audio / Video Remote Control Profile)
Supported Codec: SBC
Soundbar Input Rating: 15V 2.0A
Max Operating Temperature: 40°C
Power Adapter Model: GJ30WD-1500200DP
Input: 100–240V~, 50/60 Hz 0.8A
Output: 15V 2.0A, 30.0W
Note: Compliance marking are located at the bottom of this product

CREATIVE

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Creative User Manuals

Related Manuals