Rayrun BR02-C Smart Wireless LED Remote Controller User Manual

Umi Smart Wireless
LED Remote Controller
Model: BR02-C

General Purpose Dimming & Color Control

Function

Operation

1. Pair the remote to receiver
   The remote controller needs to be paired to receiver to work. User can pair up to 5 remote controllers to one receiver and each single remote controller can be paired to any receiver.
   To pair a new remote to the receiver, please operate with following two steps:

2. Cut off the power of receiver and power on again after more than 5 seconds.

3. Hold press remote and key simultaneously and briefly within 10 seconds after receiver powered on.
   After this operation, the remote is paired to the receiver and ready to work.

4. Unpair the remote controller
   To unpair the remote from the receiver, please operate with following two steps:

5. Cut off the power of receiver and power on again after more than 5 seconds.

6. Hold press all 3 keys simultaneously within 10 seconds after receiver powered on.
   After this operation, the remote will be unpaired from receiver.

7. Adjust color
   For working with multi-color receivers, user can double click the key to activate the color adjusting mode. After double click, the and key will swap to color adjusting function shortly. The indicator will flash at the color adjusting mode. The up and down key will swap back to dimming function after no operation for a while.

8. Change RGB/White mixing mode
   For RGB+White and RGB+CCT application, user can switch the color mixing mode between white(CCT), RGB and White(CCT)+RGB mode.
   To click the key for 3 times rapidly, the color mixing mode on receiver will change.

Specification

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>