ANTENNAS DIRECT Clearstream Horizon Amplified Instruction Manual

ANTENNAS DIRECT Clearstream Horizon Amplified

READ BEFORE INSTALLATION:
Before attaching the antenna to any surface, TEST RECEPTION in that area. Connect the antenna to the 1V or converter box and run a full channel scan. If reception is not as desired, move the antenna and rescan for the available channels.

The ClearStream HORIZON comes with

1. ClearStream HORIZON Antenna with 10 ft. Coaxial Cable (attached)
2. Kickstand
3. 2-Wall Screws and Anchors
4. Jolt Switch 18dB In-Line Amplifier with Coaxial Cable and 6 ft. USB Cable

SET UP THE ANTENNA

The HORIZON antenna has a low profile and can be installed on a wall using the screws and anchors, or on a tabletop using the kickstand.

The Jolt Switch gives you control in real-time when managing your TV signals. The simple ON/OFF switch allows you to bypass amplification when a TV channel doesn’t need it. The amplifier arrives in the ON position, increasing TV signals for a clearer picture and sound. When the switch is OFF, easily bypass the amplifier while signals are still being filtered from cellular and FM interference.

Certain TV signals may be strong enough that an amplifier is not necessary.
If a channel is distorted or pixilated when the amplifier is ON, it may be over-amplified. Toggle the switch to the OFF position. You do not need to rescan your TV for channels unless you reposition or reconnect your antenna.

REAR VIEW

Now that you’ve installed your antenna, you are ready to scan for channels. See “Scanning for channels” in the troubleshooting guide.

Congratulations!
You’re watching HDTV for FREE! Welcome to the Antennas Direct cord-cutting family.

Find 1V Channels

antennapoint.com

TROUBLESHOOTING

Problem: I’m not getting any signals at all.

Possible causes:

1. Analog-only televisions (manufactured before 2007) require a digital converter box. You MUST perform a channel scan on the converter box.

2. SCANNING FOR CHANNELS: A digital 1V must be programmed in order to receive digital channels. Once your antenna is installed, you must complete a channel scan, even if you have done so before installing to find the best location for the antenna.

   • YourlV must be set to the proper input source. Press the “Input” (or “Source” ) button on your remote and make sure the input is set to TV.
   • Follow the instructions specific to the make and model of your television or converter box to set the signal type to “ANTENNA’: “AIR’: or “BROADCAST”, not “cable’.
   • Go to the main menu of yourself or the converter box and complete a channel scan. This could be listed as “Auto Program’: “Auto Tuning’: or “Auto Channel Scan”. Consult the owner’s manual for your specific device and more precise guidelines. Be ready to experiment with various locations in your home. Remember to rescan for channels in every location.

3. Make sure the antenna is facing the broadcast tower locations serving your area. Visit www.antennapointcom for more information on broadcasters and tower locations serving your area, or download the free Antenna Point app to your Android/iOS smartphone or tablet.

4. You do not have a clear line of sight to your local broadcast towers. You might need to elevate and/or move your antenna. Remember to rescan for channels in every location.

5. You are outside the range of your antenna’s capabilities.
   Depending upon the distance between your home and the local broadcast towers, you may need a long-range outdoor/attic antenna. Antennas Direct offers many models for this purpose.

6. You may have loose coaxial cable connections.
   Check ALL connections for a tight fit.

7. Building materials such as brick, metal siding, radiant barrier, or stucco can greatly reduce the incoming signal. Do not place antennas on metallic surfaces, this interferes with 1V signal reception. Move your antenna to a window or wall facing the broadcast towers and rescan for available channels.

Problem: I’m receiving every channel except for one.

Possible cause:
You may need to rescan the TV tuner or converter box.
The channel you are not receiving may have its transmitter lower on the broadcast tower than the other transmitters and your line of sight is obstructed. Try elevating the antenna or moving it to another location. Repeat as needed.

Problem:
I’m having signal breakups, but I’m only two miles from the broadcast tower.

Possible cause:

Your TV may be receiving interfering signals.
A larger/stronger antenna will not necessarily solve this problem. Consider moving the antenna, making sure it is not placed near metal objects or other antennas. Call our helpline or chat with us online at antennasdirect.com. for an analysis of your area and installation. We may be able to offer simple solutions.

Before You Return, Call to Learn.

HELPLINE: 1-877-825-5572
MODEL# HORIZON

Amplifier Regulatory Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the antenna.
2. Increase the separation between the equipment and the converter box.
3. Connect the equipment to an outlet on a different circuit from which the converter box is connected.

Warranty

Antennas Direct™ Inc. Lifetime Warranty

Antennas Direct™ Inc. warrants this product against any defects in materials or workmanship for as long as you own the product. No warranty claim will be honored unless at the time the claim is made, you present proof of purchase from an authorized Antennas Direct™ Inc. dealer.

Antennas Direct”‘ Inc. will either repair or replace the defective product at no charge to you. This warranty covers parts but does not cover any costs incurred in the removal or reinstallation of the product. This limited warranty does not apply if the product is damaged or fails due to: misuse, improper installation, abuse, and modification of the product as originally manufactured by Antennas Direct.

Antennas Direct™ Inc. will not assume any liabilities for any other warranties, expressed or implied by any other person. The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort, or otherwise, and Antennas Direct”‘ Inc. shall not be liable for incidental or consequential damage or commercial loss, or for any other loss or damage, as set forth above.
16388 Westwood Business Park, Ellisville, MO 63021, USA.

Call to Learn.

Toll-Free Helpline:
1-877-825-5572

Technical Assistance is available
Monday- Friday, 9:00 am to 7:00 pm, and Saturday- Sunday, 10:00 am to 6:00 pm, Central Time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>