Antennas Direct C4M-AC Clear Stream 4MAX Complete TV Antenna User Manual
- June 17, 2024
- ANTENNAS DIRECT
Table of Contents
Quick Start Assembly/Installation Instructions
CLEARSTREAM 4MAX™ COMPLETE
Before beginning assembly, make sure all parts needed are present.
READ BEFORE INSTALLATION:
Before permanently attaching the antenna to any surface, TEST RECEPTION in
that area. Connect the antenna to the TV or converter box and run a full
channel scan. If reception is not as desired, move the antenna and rescan for
the available channels.
The Clear Stream 4MAX Complete comes
with:
- 2- Antenna Elements
- Antenna Spine with 2 Short Tubes
- 2- VHF Dipoles
- 2- 16mm Dipole End Cap Screws
- 2- Dipole End Caps
- 2 – 60mm Antenna Spine Bolts
- Mast End Cap
- Mast
- 2 – 20mm Mast Clamp Bolts
- Mast Clamp Back Plate| 11) U-Bolt and Wing Nuts
- 2-40mm Hex Bolts and Nuts
- 4- 50mm Screws
- Mount Base
- 4 – Sealing Pads
- 3-Way Splitter
- 30 ft. Coaxial Cable
- Jolt Switch 18 dB In-Line Amplifier with Coaxial Cable and 6 ft. USB Cable
- USB Power Adapter (style may vary)
---|---
SET UP THE ANTENNA:
Required: Adjustable Wrench, Power Drill, 3/16” Drill Bit, 8 and 10mm
Ratcheting Drivers, and a #2 Phillips Screwdriver
Make sure the Short Tubes (2) are placed in the holes on the antenna spine
before assembling.
INSTALLATION:
IMPORTANT: CHECK THE RECEPTION IN THE LOCATION WHERE YOU INTEND TO INSTALL THE ANTENNA PRIOR TO ATTACHING THE MAST TO ANY SURFACE.
Before installing the antenna on the Mast (8), adjust the mast, soitisina vertical position. You will need to adjust the antenna after it is mounted for the best reception. 4
NOTE: You must use the 30 ft. coaxial cable (provided) between the
antenna and the amplifier. You cannot attach the male connector on the
amplifier’s coaxial cable to the antenna or the antenna and amplifier will not
work.
The Jolt Switch gives you control in real time when managing your TV signals.
The simple ON/OFF switch allows you to bypass amplification when a TV channel
doesn’t need it. The amplifier arrives in the ON position, increasing TV
signals for a clearer picture and sound. When the switch is OFF, easily bypass
the amplifier while signals are still being filtered from cellular and FM
interference.
Certain TV signals may be strong enough that an amplifier is not necessary. If
a channel is distorted or pixilated when the amplifier is ON, it may be over-
amplified. Toggle the switch to the OFF position. You do not need to rescan
your TV for channels unless you reposition or reconnect your antenna.
Make sure the front of the antenna is facing the broadcast towers. 
Now that you’ve installed your antenna, you are ready to scan for channels.
See “Scanning for channels” in the troubleshooting guide.
Congratulations! You’re watching HDTV for FREE!
Welcome to the Antennas Direct cord-cutting family.
TROUBLESHOOTING:
Problem: I’m not getting any signals at all.
Possible causes:
-
Analog-only televisions (manufactured before 2007) require a digital converter box. You MUST perform a channel scan on the converter box.
-
SCANNING FOR CHANNELS: A digital TV must be programmed in order to receive digital channels. Once your antenna is installed, you must complete a channel scan, even if you have done so before installing to find the best location for the antenna.
a) Your TV must be set to the proper input source. Press the “Input” (or “Source”) button on your remote and make sure the input is set to TV.
b) Follow the instructions specific to the make and model of your television or converter box to set the signal type to “ANTENNA’, “AIR”, or “BROADCAST”, not “Cable”.
c) Go to the main menu of your TV or converter box and complete a channel scan. This could be listed as “Auto Program’, “Auto Tuning”, or “Auto Channel Scan”. Consult the owner’s manual for your specific device and more precise guidelines. Be ready to experiment with various locations in your home. Remember to rescan for channels in every location. -
Make sure the front of the antenna is facing the broadcast tower locations serving your area. Visit www.antennapoint.com for more information on broadcasters and tower locations serving your area, or download the free Antenna Point app to your Android/iOS smartphone or tablet.
-
Outdoor Use: You do not have a clear line of sight to your local broadcast towers.
You might need to elevate and/or move your antenna. Make certain the antenna is not aimed into physical obstacles such as a roof, building, or trees.
Remember to rescan for channels in every location. -
You are outside the range of your antenna’s capabilities.
Depending upon the distance between your home and the local broadcast towers, you may need a longer range outdoor/attic antenna. Antennas Direct offers many models for this purpose. -
You may have loose coaxial cable connections.
Check ALL connections for a tight fit and check all outdoor connections for moisture or corrosion. -
Indoor Use: Building materials such as brick, metal siding, radiant barrier, or stucco can greatly reduce the incoming signal. If in an attic, move the antenna outdoors. If outdoors, make certain the antenna is not aimed into physical obstacles, such as buildings, trees, or a hill. Remember to rescan every time you move your antenna.
Problem: I’m receiving every channel except for one.
Possible cause:
- You may need to rescan the TV tuner or converter box.
The channel you are not receiving may have its transmitter lower on the broadcast tower or on a different tower than the other transmitters and your line of sight is obstructed. Try elevating the antenna or moving it to another location. Repeat as needed.
Problem: I’m having signal breakups, but I’m only two miles from the broadcast tower.
Possible cause:
- Your TV may be receiving interfering signals.
A larger/stronger antenna will not necessarily solve this problem. Consider moving the antenna, making sure it is not placed near metal objects or other antennas. If this is not successful, your signal may be too strong and may require the use of an attenuator. Call our helpline or chat with us online at antennasdirect.com for an analysis of your area and installation. We may be able to offer simple solutions.
Before You Return, Call to Learn.
HELPLINE: 1-877-825-5572
Model # C4M-AC
Antennas Direct™ Inc.
Antenna Lifetime Warranty
Antennas Direct™ Inc. warrants this product against any defects in
materials or workmanship for as long as you own the product. No warranty claim
will be honored unless, at the time the claim is made, you present proof of
purchase from an authorized Antennas Direct™ Inc. dealer.
Antennas Direct™ Inc. will either repair or replace the defective product at
no charge to you. This warranty covers parts, but does not cover any costs
incurred in the removal or reinstallation of the product. This limited
warranty does not apply if the product is damaged or fails due to: misuse,
improper installation, abuse, and modification of the product as originally
manufactured by Antennas Direct.
Antennas Direct™ Inc. will not assume any liabilities for any other
warranties, expressed or implied by any other person. The foregoing shall be
the sole and exclusive remedy of any person, whether in contract, tort, or
otherwise, and Antennas Direct™ Inc. shall not be liable for incidental or
consequential damage or commercial loss, or for any other loss or damage, as
set forth above.
16388 Westwoods Business Park, Ellisville, MO 63021, USA
Limited 90 Day Warranty
Jolt™ Switch In-Line Amplifier, 3-Way Splitter, and Coaxial Cable
Antennas Direct™ Inc. warrants this product against any defects in materials
or workmanship for ninety (90) days. No warranty claim will be honored unless,
at the time the claim is made, you present proof of purchase from an
authorized Antennas Direct™ Inc. dealer.
Antennas Direct™ Inc. will either repair or replace the defective product at
no charge to you. This warranty covers parts but does not cover any costs
incurred in the removal or reinstallation of the product. This limited
warranty does not apply if the product is damaged or fails due to: misuse,
improper installation, abuse, and modification of the product as originally
manufactured by Antennas Direct.
Antennas Direct™ Inc. will not assume any liabilities for any other
warranties, expressed or implied by any other person. The foregoing shall be
the sole and exclusive remedy of any person, whether in contract, tort, or
otherwise, and Antennas Direct™ Inc. shall not be liable for incidental or
consequential damage or commercial loss, or for any other loss or damage, as
set forth above.
16388 Westwoods Business Park, Ellisville, MO 63021, USA
©Antennas Direct
Model # C4M-AC 12.2022
Amplifier Regulatory Notice: This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this device.
This equipment has been tested and found to comply with the limits for a Class
B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the antenna.
2. Increase the separation between the equipment and converter box.
3. Connect the equipment into an outlet on a different circuit from which the
converter box is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Call to Lea rn.
Toll-Free Helpline: 1-877-825-5572
Technical Assistance is available Monday – Friday, 9:00 am to 7:00 pm and
Saturday – Sunday, 10:00 am to 6:00 pm, Central Time.
Warning! Keep Away from Power Lines.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>