True Wireless Earbuds 5.0 TWS Headset-Complete Features/User Instruction
- June 5, 2024
- Kadell
Table of Contents
True Wireless Earbuds 5.0 TWS Headset
Specifications
- PRODUCT NAME: TWS 5.0 earphones
- MODEL: B39105
- COLOR: Black
- MATERIAL: Plastic
- , MUSIC TIME: 6 hours
- STANDBY TIME: 18hours
- EARBUDS BATTERY CAPACITY: 50mAh
- CHARGING BOX CAPACITY: 500mAh
- WATERPROOF: IPX5
- BRAND: Kadell
Introduction
It has a 500mAh battery with a charging case. With this, you can Correctly listen to the music, it supports tracks, and calling. It has all intelligent Chinese and English voice prompts, boot, pair, shut down the phone power will be low voice prompts; you can recall call number, the last call back; it has One to two connections; two mobile phones can be connected at the same time. After the phone has been turned down, the headset will immediately reconnect to the phone when it is opened, making it more convenient. It has Intelligent compatibility, it supports all mobile phones, tablets, and notebooks, as well as singing, QQ music, and movies.
PACKAGE INCLUDES
- 2 x headphone
- 1 x USB charging cable
- 1 x charging case
HOW TO PAIR WITH PHONE
- Check to see if your phone’s Bluetooth is turned on. The distance between your phone and earbuds should be less than 3 feet (1 meter).
- Turn on your earbuds and go to your phone’s Bluetooth settings to look for new devices.
- You’ve established a connection and are ready to listen to music!
HOW TO CHARGE
It’s dubbed “True Wireless Earbuds” since it connects without using a cable. However, you must charge your case using a USB or Type-C cable.
Frequently Asked Questions
-
When will my true wireless earphones be fully charged?
Connect the charging cable (included) to the charging connection on the back of the charging case and the other end of the charging cable to a usable USB power source with the earbuds inside. When the power indication light on each earbud turns off, the earbuds are fully charged. -
What is the procedure for turning on my TWS headphones?
To turn on each earphone, press and hold the power/pairing button for up to 2-3 seconds. A voice prompt with “Power On” will be heard. -
What is the best way to increase the volume on my TWS earbuds?
What is the best way to control the volume on my TWS 5.0 earbuds? The Creative Outlier Air TWS earbuds provide direct volume control, which is simple to use. Turn down the volume by pressing and holding the left earpiece. Turn up the volume by pressing and holding the right earbud. -
How do you activate pairing mode on TWS earbuds?
Remove the pairing information for the left and right earbuds (Reset the i12 TWS). 5 times press the power button in pairing mode until the LED turns red.
To turn on the i12 TWS, hold down the function key for 5 seconds.
Enter pairing mode, which takes around 5 seconds, and listen for the prompt tone “pairing mode.” -
Why isn’t my TWS pairing?
Delete the pairing information for the left and right earbuds (Reset the i12 TWS). The LED will turn red after 5 clicks on the power button when the device is in pairing mode. The i12 TWS is then turned on by holding down the function key for five seconds. -
What is the procedure for turning off my TWS earbuds?
Turn the earbuds off manually: You will hear the voice instructions “Power off” and they will be turned off if you press and hold either of the buds on the touch-key region for roughly five seconds. -
What’s the best way to pair left and right earbuds?
Remove the left and right earphones from the case and push and hold the touch control area for 3 seconds or until a white LED light flashes on both earbuds. Long pressing both the left and right earbuds at the same time is critical. -
On wireless earbuds, where is the button?
Place the earphones in the charging case and push the power button on the front of the case to charge them. Hold down the multi-function buttons to switch off the earphones before putting them back into the case to be charged after use. -
How long does it take to charge TWS earbuds?
Both the headphones and the charging case have a wide range of charging times. It takes about 1-2 hours for headphones to fully recharge within their case, and the case takes less than an hour. This can be as little as 30 minutes if the charging case in question supports USB-C. -
Without a case, how do you charge TWS earbuds?
TWS headsets can be charged without a case. However, they have another feature: the device is connected to a USB input or charging via a particular connection. The bundled double cord is utilized, for example, on the I7 TWS model.