ANTENNAS DIRECT ClearStream 4MAX UHF VHF Indoor Outdoor TV Antenna Instruction Manual
- May 15, 2024
- ANTENNAS DIRECT
Table of Contents
ANTENNAS DIRECT ClearStream 4MAX UHF VHF Indoor Outdoor TV Antenna
Product Information
Specifications
- Manufacturer: Antennas Direct
- Model: [Insert Model Number]
- Type: TV Antenna
- Range: [Insert Range]
- Compatibility: Analog and Digital TVs
- Indoor/Outdoor Use: Both
Product Usage Instructions
Installation and Setup:
- Ensure your TV is set to the proper input source (ANTENNA, AIR, or BROADCAST).
- Complete a channel scan on your TV or converter box to program and receive digital channels.
Antenna Positioning
- Face the front of the antenna towards the broadcast tower locations in your area.
- For outdoor use, ensure a clear line of sight without physical obstacles obstructing the antenna.
Troubleshooting:
If you are not receiving signals or experiencing signal breakups, check for
loose coaxial cable connections and interference sources.
Consider moving the antenna to a different location or adjusting its position
for better reception.
Frequently Asked Questions (FAQ)
-
Q: I’m not getting any signals at all. What should I do?
A: Ensure your TV is set to the correct input source, complete a channel scan, and face the antenna towards broadcast towers. Check for loose connections and obstacles obstructing the signal. -
Q: I’m receiving every channel except for one. How can I fix this?
A: Try elevating or moving the antenna to improve line of sight with the specific channel’s transmitter. Repeat the channel scan as needed. -
Q: I’m having signal breakups despite being close to the broadcast tower. What could be the issue?
A: Interfering signals or signal strength may be causing disruptions. Consider relocating the antenna away from metal objects, adjusting its position, or using an attenuator if needed.
Scan to Watch Assembly Video antennasdirect.com/assembly- videos
Quick Start Assembly/Installation Instructions
CLEARSTREAM 4MAX™ Before beginning assembly, make sure all parts needed are
present.
Coaxial cable sold separately.
READ BEFORE INSTALLATION
Before permanently attaching the antenna to any surface, TEST RECEPTION in
that area. Connect the antenna to the TV or converter box and run a full
channel scan. If reception is not as desired, move the antenna and rescan for
the available channels.
The ClearStream 4MAX comes with
- 2- Antenna Elements
- Antenna Spine with 2 Short Tubes
- 2 – VHF Dipoles
- 2 – 16mm Dipole End Cap Screws
- 2 – Dipole End Caps
- 2 – 60mm Antenna Spine Bolts
- Mast End Cap
- Mast
- 2 – 20mm Mast Clamp Bolts
- Mast Clamp and Back Plate
- U-Bolt and Wing Nuts
- 2 – 40mm Hex Bolts and Nuts
- 4 – 50mm Screws
- Mount Base 1
- 4 – Sealing Pads
SET UP THE ANTENNA
Required: Coaxial Cable (sold separately), Adjustable Wrench, Power Drill,
3/16″ Drill Bit, 8 and 10mm Ratcheting Drivers, and a #2 Phillips Screwdriver
INSTALLATION ON THE MAST:
IMPORTANT: CHECK THE RECEPTION IN THE LOCATION WHERE YOU INTEND TO INSTALL THE ANTENNA PRIOR TO ATTACHING THE MAST TO ANY SURFACE.
WALL MOUNT
the desired surface and position on holes, 1 ½” deep, for each of the 50mm Screws (13). Place the Sealing Pads (15) over the pilot holes, and the Mount Base (14) on top of the Sealing Pads. Tighten the 50mm Screws (13).
Warning! Keep Away from Power Lines.
FRONT VIEW
REAR VIEW ON MAST
Now that you’ve installed your antenna, you are ready to scan for channels. See “Scanning for channels” in the troubleshooting guide. Congratulations! You’re watching HDTV for FREE! Welcome to the Antennas Direct cord-cutting family.
TROUBLESHOOTING:
Problem: I’m not getting any signals at all.
Possib le causes:
-
Analog-only televisions (manufactured before 2007) require a digital converter box. You MUST perform a channel scan on the converter box.
-
SCANNING FOR CHANNELS: A digital TV must be programmed in order to receive digital channels. Once your antenna is installed, you must complete a channel scan, even if you have done so before installing to find the best location for the antenna.
- Your TV must be set to the proper input source. Press the “Input” (or “Source”) button on your remote and make sure the input is set to TV.
- Follow the instructions specific to the make and model of your television or converter box to set the signal type to “ANTENNA”, “AIR”, or “BROADCAST”, not “Cable”.
- Go to the main menu of your TV or converter box and complete a channel scan. This could be listed as “Auto Program”, “Auto Tuning”, or “Auto Channel Scan”. Consult the owner’s manual for your specific device and more precise guidelines. Be ready to experiment with various locations in your home. Remember to rescan for channels in every location.
-
Make sure the front of the antenna is facing the broadcast tower locations serving your area. Visit www.antennapoint.com for more information on broadcasters and tower locations serving your area, or download the free Antenna Point app to your Android/iOS smartphone or tablet.
-
Outdoor Use: You do not have a clear line of sight to your local broadcast towers.
You might need to elevate and/or move your antenna. Make certain the antenna is not aimed into physical obstacles such as a roof, building, or trees. Remember to rescan for channels in every location. -
You are outside the range of your antenna’s capabilities.
Depending upon the distance between your home and the local broadcast towers, you may need a longer range outdoor/attic antenna. Antennas Direct offers many models for this purpose. -
You may have loose coaxial cable connections.
Check ALL connections for a tight fit and check all outdoor connections for moisture or corrosion. -
Indoor Use: Building materials such as brick, metal siding, radiant barrier, or stucco can greatly reduce the incoming signal. If in an attic, move the antenna outdoors. If outdoors, make certain the antenna is not aimed into physical obstacles, such as buildings, trees, or a hill. Remember to rescan every time you move your antenna.
Problem : I’m receiving every channel except for one.
Possible cause :
- You may need to rescan the TV tuner or converter box.
The channel you are not receiving may have its transmitter lower on the broadcast tower or on a different tower than the other transmitters and your line of sight is obstructed. Try elevating the antenna or moving it to another location. Repeat as needed.
Problem : I’m having signal breakups, but I’m only two miles from the
broadcast tower.
Possible cause:
- Your TV may be receiving interfering signals.
A larger/stronger antenna will not necessarily solve this problem. Consider moving the antenna, making sure it is not placed near metal objects or other antennas. If this is not successful, your signal may be too strong and may require the use of an attenuator. Call our helpline or chat with us online at antennasdirect.com for an analysis of your area and installation. We may be able to offer simple solutions.
Before You Return, Call to Learn.
HELPLINE: 1-877-825-5572
MODEL # C4MVJ
Antennas Direct™ Inc.
Antenna Lifetime Warranty Antennas Direct’™ Inc. warrants this product against
any defects in materials or workmanship for as long as you own the product. No
warranty claim will be honored unless at the time the claim is made, you
present proof of purchase from an authorized Antennas Direct™ Inc. dealer.
Antennas Direct’™ Inc. will either repair or replace the defective product at
no charge to you. This warranty covers parts but does not cover any costs
incurred abuse, and modification of the product as originally manufactured by
Antennas Direct product is damaged or falls due to: misuse, improper
installation, exclusive remedy any person, whether in contract, tort, or
otherwise, ties express direct lied Shall not be aere or incident or
consequential damage or commercial loss, or for any other loss or damage, as
set forth above. 16388 Westwood Business Park, Ellisville, MO 63021, USA
Limited 90-Day Warranty Mast
Antennas Direct™ Inc. warrants this product against any defects in materials or workmanship for ninety (90) days. No warranty claim will be honored unless, at the time the claim is made, you present proof of purchase from an authorized Antennas Direct™ Inc. dealer. Antennas Direct'” Inc. will either repair or replace the defective product at no charge to you. This warranty covers parts but does not cover any costs incurred in the removal or reinstallation of the product. This limited warranty does not apply if the product is damaged or fails due to: misuse, improper installation, abuse, and modification of the product as originally manufactured by Antennas Direct. Antennas Direct™ Inc. will not assume any liabilities for any other warranties expressed or implied by any other person. The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort, or otherwise, and Antennas Direct™ Inc. shall not be liable for incidental or consequential damage or commercial loss, or for any other loss or damage, as set forth above. 16388 Westwood Business Park, Ellisville, MO 63021, USA
©Antennas Direct Model # C4MVJ 01.2024
TV RECEPTION CAN BE AFFECTED BY OBSTRUCTIONS OR DISTANCE BETWEEN YOUR HOME AND
BROADCAST TOWERS.
Call us toll-free for technical assistance at
1-877-825-5572 or contact
support@antennasdirect.com
FIND TV CHANNELS, AIM YOUR ANTENNA
antenna point
DOWNLOAD OUR FREE APP
References
- Antennas Direct | TV Transmitter Locator and Mapping Tool
- Antennas Direct | TV Antennas Reinvented
- Antennas Direct | TV Transmitter Locator and Mapping Tool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>