ANTENNAS DIRECT VIEW ClearStream View Wall Frame Amplified Indoor HDTV Antenna Instruction Manual
- June 1, 2024
- ANTENNAS DIRECT
Table of Contents
ANTENNAS DIRECT VIEW ClearStream View Wall Frame Amplified Indoor HDTV
Antenna
Scan to Watch the Assembly Video or go to
READ BEFORE INSTALLATION
Before attaching the antenna to any surface, TEST RECEPTION in that area. Connect the antenna to the TV or converter box and run a full channel scan. If reception is not as desired, move the antenna and rescan for the available channels.
The ClearStream VIEW comes with:
- ClearStream VIEW Antenna
- 12 ft. Coaxial Cable
- 20dB In-Line Amplifier
- 3 ft. Coaxial Cable for In-Line Amplifier
- USB Power Adapter
- 5 ft. USB Cable
CUSTOMIZE YOUR FRAME
With easy-to-use slide-locks, you can add or change your photos in a snap! Pull each slide-lock to remove the back panel. Add your photos, then replace the back panel and push the slide-locks back into place. Do not modify, tear, or remove the covering of the back panel, as this may cause damage to the antenna and interfere with broadcast TV reception.
Use the keyhole on the back panel of the frame to hang on a wall or flat, vertical surface.
CONNECT THE ANTENNA:
SET UP IN-LINE AMPLIFIER:
Now that you’ve installed your antenna, you are ready to scan for channels. See “Scanning for channels” in the troubleshooting guide. Congratulations! You’re watching HDTV for FREE! Welcome to the Antennas Direct cord-cutting family.
TROUBLESHOOTING
Problem: I’m not getting any signals at all.
Possible causes:
- Analog-only televisions (manufactured before 2007) require a digital converter box. You MUST perform a channel scan on the converter box.
- SCANNING FOR CHANNELS: A digital TV must be programmed in order to receive digital channels. Once your antenna is installed, you must complete a channel scan, even if you have done so before installing to find the best location for the antenna.
- a) Your TV must be set to the proper input source. Press the “Input” (or “Source”) button on your remote and make sure the input is set to TV.
- b) Follow the instructions specific to the make and model of your television or converter box to set the signal type to “ANTENNA”, “AIR”, or “BROADCAST”, not “Cable”.
- c) Go to the main menu of your TV or converter box and complete a channel scan. This could be listed as “Auto Program”, “Auto Tuning”, or “Auto Channel Scan”. Consult the owner’s manual for your specific device and more precise guidelines. Be ready to experiment with various locations in your home. Remember to rescan for channels in every location.
- Make sure the antenna is facing the broadcast tower locations serving your area. Visit www.antennapoint.com for more information on broadcasters and tower locations serving your area, or download the free Antenna Point app to your Android/iOS smartphone or tablet.
- You do not have a clear line of sight to your local broadcast towers. You might need to elevate and/or move your antenna. Remember to rescan for channels in every location.
- You are outside the range of your antenna’s capabilities. Depending upon the distance between your home and the local broadcast towers, you may need a long-range outdoor/attic antenna. Antennas Direct offers many models for this purpose.
- You may have loose coaxial cable connections. Check ALL connections for a tight fit.
- Building materials such as brick, metal siding, radiant barrier, or stucco can greatly reduce the incoming signal. Move your antenna to a window or wall facing the broadcast towers and rescan for the available channels.
Problem: I’m receiving every channel except for one.
Possible cause:
- You may need to rescan the TV tuner or converter box. The channel you are not receiving may have its transmitter lower on the broadcast tower than the other transmitters and your line of sight is obstructed. Try elevating the antenna or moving it to another location. Repeat as needed.
Problem: I’m having signal breakups, but I’m only two miles from the
broadcast tower.
Possible causes:
- Your TV may be receiving interfering signals. A larger/stronger antenna will not necessarily solve this problem. Consider moving the antenna, making sure it is not placed near metal objects or other antennas. If this is not successful, your signal may be too strong and may require the use of an attenuator. Call our helpline or chat with us online at antennasdirect.com for an analysis of your area and installation. We may be able to offer simple solutions.
- In some areas, broadcast signals are strong enough that an amplifier is not necessary. If you have completed the installation of the antenna with the In-Line Amplifier and reception is not as desired, remove the In-Line Amplifier and connect the antenna directly to the TV using the coaxial cable. Remember to scan for channels every time you reposition or reconnect your antenna.
Before You Return, Call to Learn.
Amplifier Regulatory Notice: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the antenna.
- Increase the separation between the equipment and the converter box.
- Connect the equipment into an outlet on a different circuit from which the converter box is connected.
Antennas Direct® Inc. warrants this product against any defects in materials or workmanship for as long as you own the product. No warranty claim will be honoured unless at the time the claim is made, you present proof of purchase from an authorized Antennas Direct® Inc. dealer. Antennas Direct® Inc. will either repair or replace the defective product at no charge to you. This warranty covers parts but does not cover any costs incurred in the removal or reinstallation of the product. This limited warranty does not apply if the product is damaged or fails due to: misuse, improper installation, abuse, and modification one product as onaina v manufactured by Antennas Direct. Installation, abuse, and modification of the product as originally manufactured by Antennas Direct. Antennas Direct® Inc. will not assume any liabilities for any other warranties, expressed or implied by any other person. The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort, or otherwise, and Antennas Direct® Inc. shall not be liable for incidental or consequential damage or commercial loss, or for any other loss or damage, as set forth above. 16388 Westwood Business Park, Ellisville, MO 63021, USA
Call to Learn.
toll-re Hearine: 1-877-825-5572 Insaturday-Sunday, 10:00 am Mo 80 pm, central Tame o 7:00 pm
Technical Assistance is available Monday – Friday, 9:00 am to 7:00 pm and Saturday – Sunday, 10:00 am to 6:00 pm, Central Time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>